AutoCAD LT :: Service Pack 1 Won't Install
Oct 1, 2013
I am trying to get AutoCAD LT 2002 working in Windows 7. I did searching on these boards and from what I read the solution is to install the AutoCAD LT 2002 service pack (upgrading AutoCAD to verison 44) and then instal the gedit 3 compatibility patch (upgrading it from verison 44 to 47.
The problem I have is that when I run the service pack installation program (K030ltss1_K044_aclt_unl.exe) I get a message that my installation is already up to date. However when I check the version in autoCAd itself it says that it's still at version 30.
View 2 Replies
ADVERTISEMENT
Sep 12, 2012
Since my AutoCAD crashes when exiting 95% of the time I thought I would install service pack 1.1. I have the 64 bit version of Autodesk Product Design Suite Premium 2013 which includes AutoCAD, AutoCAD Mechanical and AutoCAD Electrical. It is a Windows 7 HP XW series workstation.
Everytime I try to install the service pack it does not install, and a dialog box pops up stating "The service pack could not be installed because the expected Autodesk product could not be located on your computer." To be certain I tried both the 64 bit and 32 bit service pack. What may be causing this? Is this possibly caused by the fact that in Autodesk Product Design Suite Premium, AutoCAD is kind of a burried inside AutoCAD Mechanical, somewhat like a sub-program of AutoCAD Mechanical.
View 9 Replies
View Related
Sep 6, 2013
This will not install. It cannot find PSPPro.msi and neither can I using search. I do have Service pack 2 installed. Everytime I open the program it wants me to update. I am using Windows 8.
View 1 Replies
View Related
Mar 13, 2012
I am trying to install a service pack. the file is...
autocadmap3d2011lockedx86sp2
I click to install this application service pack and this error appears...
THe update could not be installed because the expected autodesk product could not ne located on your computer. Make sure that you are using the correct update for the product.
I believe I have the correct file for the product but I do not know were to go from here.
View 5 Replies
View Related
Oct 1, 2012
after install the last service pack, I can't use the MAPPOLYLINETOPOLYGON command, it works only for the first time;
also, I've personalized the acad.pgp file, changing some commands, but some don't work (as EQ=matchprop); they work right before updating
View 9 Replies
View Related
Jul 23, 2013
My AutoCad 2013 is a bit unstable and crashes fairly often. Autodesk is telling me to install the 64 bit service pack. When I try to run it, I get an error code 1324 (illegal character in My Documents) and error code 1603.
View 3 Replies
View Related
Sep 24, 2012
I am using AutoCad LT 2013, 64-bit on Windows 7 Professional. I noticed there is an update available as I was using the program. When I attempted to update Service Pack 1.1, I get this error "A problem prevented the Service Pack from being installed. Contact your system administrator. Error 1603"
View 9 Replies
View Related
Sep 2, 2008
After installing SP3 for XP I encountered problems while opening files in Photoshop. It takes 10x times more to open GIF, JPEG, PNG and PSD files than before. While it opens, Photoshop seems to freeze and it takes up to 20 seconds until a 10x10 pixel file or a 10MB PSD file is opened. So size doesn't matter.
View 1 Replies
View Related
Apr 16, 2009
I have been using the full version now for about 6 weeks and its hopeless. I can't do anything without it crashing, oh i can open it Thank god i have CS3 .. it works fine doing all the same work.If adobe ppls read this .... Can i ask what the you are doing? - i can't believe i paid lots of $$ for this .. Photoshop CS4 is very very flakey. in the last 24 hours i have had 7 crashes from CS4 .. not one from CS3 .... Total crashes using CS4 over two machines would exceed 50-60 crashes now, it seems it cannot even make an action without crashing 5 times.Can i have a refund or can you appease me and tell me i don't have the correct service pack, not develop software for adobe and fix there problems by been on the phone to them 24/7. I would even be keen to hear I'm not alone and this is a flop.
View 1 Replies
View Related
Aug 31, 2012
I was rolling out 2013 in one of our offices during the brief time SP1 was available. I went ahead and included SP1 in the office's network deployment (using the append option) and installed on all the machines in that office. Now that SP1 has proven to to be a problem, is there any way to uninstall the SP without having to do a complete uninstall and reinstall at each machine? Tried checking thru control panel (with and without "show updates" turned on), but the SP does not appear in the list to uninstall separately.
View 2 Replies
View Related
Feb 19, 2012
I got great results with X4, until it installed the service pack this week.. Now i cannot render an mp4 without long sections 'staggering' - like a strobing effect on the entire render, the picture lurches as it plays, and things like VLC hang when scanning thru the file..
Also, the framrate i set now has little relation to the actual outcome..
The piece i am rendering fails at a different point each time - the staggering starts and thats that, framrate drops to about 2fps - utterly useless..
I have tried removing the install and re-installing, but when i do this i can clearly see by 'check for updates' that there are no updates, which means SP2 is surviving the uninstall.
I have tried every combination of every setting for days, this is a new problem directly related to the service pack..
Where can i get a manifest of the files in the service packs? i'm going to have to remove them all by hand and start again..
View 8 Replies
View Related
May 16, 2008
Photoshop CS2 may have with the latest service pack for Windows XP Pro? Photoshop is the most used program on my system and before I install SP3,
View 16 Replies
View Related
Jan 16, 2014
How do i find out which update/service pack of max i'm using. I'm currently using 2014 but cant remember if i've installed sp3.
Andy Mac Attack POW
Work Computer - Max 2012, Core i7 3.6, 6GB RAM, ATI FireGL V7700 512MB, Windows 7 64bit
Home Computer -BBC Electron with tape player and a copy of creepy cave
View 2 Replies
View Related
Feb 6, 2011
I need a consensus from the forum members here regarding this Service Pack 2 update (which is named Patch3.exe). I've read that it causes problems and I've read where it doesn't. As of right now, without the patch, my version is 13.6.2.36 , I think with the patch it will be .69, or is there another patch (or version) floating around out there that is more stable?
Also, under Settings>Performance the "Use Hardeware Encoder acceleration" is grayed out. How to check that thing off and what hardware are you using to get it to show up?
View 3 Replies
View Related
Aug 26, 2013
It worked fine until the update. Now it's showing EVERYTHING.
View 2 Replies
View Related
Mar 16, 2010
How to fix this error message in Windows XP service Pack 3?
It does not allow me to use my Corel 13 and causes problems in Corel 8.I've already unchecked the Install files for Asian languages, but to no avail.
View 11 Replies
View Related
Sep 18, 2011
Is it possible to Remove Service Pack Updates?
View 2 Replies
View Related
Nov 7, 2013
While downloading the latest Service Pack 1, I get a fault-message (see attachment)
Even after deleting and re-installing Corel PSP X6 (version after initial install = 16.1.0.48)
Tried to download the SP through the program itself, but even from the download from the Corel server, i have the same result !
View 13 Replies
View Related
May 9, 2012
I purchased PSP-X4 Ultimate in a box. I was able to install the program itself onto my netbook but neither the Ultimate Pack nor the ProX4-KPT download could install because the popups are so big the buttons to click are inaccessible.
I tried changing the resolution and some other generic workarounds I found in a net search, to no avail.
The program itself was a little difficult to install for the same reason, but there was just barely enough of the buttons accessible to successfully click on them.
View 2 Replies
View Related
Oct 24, 2012
I have a new computer, but I backed up my photoshop files onto the online service, and paid for that. Now I have gotten my photos back, but am unable to find the catalog. How to find the catalog in the backup service files?
View 1 Replies
View Related
Apr 21, 2013
I recently upgraded to PSE11 but the installation did not create the service Adobe Active File Monitor V11. I followed the forum thread [URL] .... to completely uninstall, remove residual files, reinstall from DVD. Still the service DOES NOT EXIST.
I followed the Elements Village thread on "Watched Folders Issues" to manually create the service. But when I attempt to start it, I get an error that says "Error 1053 The service did not respond to the start of control request in a timely manner."
I'm using WinXP Media Center Ed. SP3.
View 4 Replies
View Related
Nov 13, 2012
Is it just me or is the window of the pack and go not resizable?
5 lines for me, is just not enough.
Any ways to increase the size?
Inventor 2012 lastest service pack
RAM: 24GB DDR3 / CPU: Intel Xeon W3690 @3.47Ghz
Video: NVidia GeForce 680/ HDD: 15.7K
Windows 7 Pro 64-bit
View 3 Replies
View Related
Jan 4, 2012
When using pack and go, is it possible to select several idw files at the same time? The some of the idw files is using the same parts, but many is not using the same parts. The parts that I want to copy by using pack and go is not in vault.
Autodesk Product Design Suite Ulitmate 2012 Sp1 / Vault Collaboration 2012 Sp1
HP EliteBook 8560w
Intel(R)Core(TM) i7 CPU Q 720 @ 2,0GHz 2,0GHz
16GB RAM
Windows 7 X64 SP1
View 7 Replies
View Related
Feb 14, 2012
So we are wanting to send on a model to a customer. I have used pack and go with the following settings:
Copy to Single Path
Model Files Only
When I try and open the newly created files, it gives a bunch of error messages looking for FEA files, as well as missing some OLE links, which is good as I don't want to send on any FEA information with the model, but is there a way to strip that out completely from the model without having to go through each individual file and deleting all of the simulations?
View 4 Replies
View Related
Sep 19, 2013
I have a user who needs to be able to enter Chinese characters into AutoCAD 2010. The characters display properly in Windows, but AutoCAD cannot recognize them. I believe I need a language pack. Where can I find the official 2010 AutoCAD language packs? I don't see them in Subscription.
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
View 3 Replies
View Related
Sep 25, 2013
I recently did a pack and go on a top level assembly. Kept folder hierarchy. Included linked files. Included referenced files. All OK so far.
Then opened the assembly in the “Pack and go” folder I created to put it, and it cannot find all the content center parts, such as the ASME eccentric reducer and M24 bolt – see attached i.e. I had to resolve the links. I know they came over with the pack and go as they are in the “Libraries” folder.
Inventor Professional 2014.
Windows 7 64 bit.
View 1 Replies
View Related
Jun 14, 2012
I use a WMS service as a FDO datasource in AutoCAD Map. This works well.
- How can I view the legend (GetLegendGraphic)?
- How can I access the attributes (GetFeatureInfo)?
View 7 Replies
View Related
Dec 14, 2012
On a couple assy's, I am trying to use pack&go to make self-contained versions of them.
Only problem is, the assy file (xxx.iam) and all sub-assy files are still linked to the component files in the original location even though the component files were copied to the new location with the P&G command
The whole point in this feature is to make self sufficient copies of something that don't depend on the original data.
This shows the settings I am using It is finding all the files ok. It just doesn't change the relationships on the new iam files. I could manually copy them and do the same thing this feature is doing.
Is there some hidden checkbox I need to find ? Note, I also tried once with "Include linked files" unchecked and got the same result.
View 4 Replies
View Related
Oct 22, 2012
im using acad 2010 in work and in home. i want full sync of all the customization i'vei made in both sides. itried to use a cloud service like Dropbox, i copy and paste there all the supportfiles and i set the path to there inboth machines but for some reason acad wouldn't use it.
View 9 Replies
View Related
Aug 22, 2013
2014.
Try to Sign In.
See Connecting message for 2 seconds.
Then.. message: Requested service not available
Checked system clock and zone, appears to be correct.
IT department state that a proxy is not being used, direct internet available.
View 8 Replies
View Related
Jun 14, 2010
My staff is starting to get the following fatal error when opening AutoCAD ACA 2010:
FATAL ERROR: Duplicated Service Name: SERVICE_VBA
We think taht this is happening after oening a session of AutoDesk Impression and then closing the Impression session and starting AutoCAD. We have corrected this by deleting the username directory under the C:documents & Settings directory.
View 1 Replies
View Related
