My staff is starting to get the following fatal error when opening AutoCAD ACA 2010:
FATAL ERROR: Duplicated Service Name: SERVICE_VBA
We think taht this is happening after oening a session of AutoDesk Impression and then closing the Impression session and starting AutoCAD. We have corrected this by deleting the username directory under the C:documents & Settings directory.
To be more precise: Fatal error unhandled access violation writing 0x0024 Exception at 7776e4b4h
I've set up a drop down menu with various page setups coming from another file (-psetupin).
If I initiate a page setup for our Plotter or Printer, everything works fine. If I initiate a page setup for the 'dwg to pdf.pc3', I get the error listed above. I don't understand why, it worked fine not too long ago. Also, if I manually create a page setup with the same 'dwg to pdf.pc3' it works fine...
ACA 2012
Windows 7
Intel Core i7-2600 CPU
3.4GHz - 8GB ram - 64 bit
I have been getting fatal errors during my user account but not in my admin account. I logged in as admin and repaired Autocad Architecture 2010, using the system disk. I got back the report that Autocad was repaired. However, when I returned to my user account, I get an unhandled expection error when I start up Autocad.Architecture 2010. Do I need to uninstall Autocad Architecture 2010 and then reinstall or should I just pick the option to reinstall Autocad Architecture and then do I have to another registration code?
View 1 Replies View RelatedWhen using AutoCAD Architecture 2014, I get this error intermittently when launching AutoCAD Architecture 2014. I have submitted numerous error reports, and have done research into getting this error taken care of, but nothing that I have tried has worked.
View 9 Replies View RelatedWe have a 32-bit machine that continues to receive the above mentioned error message. This seems to happen unexpectedly and closes AutoCAD with no warning. It has been happening with more frequency lately. What causes this error and what steps may be taken to remedy it?
View 7 Replies View RelatedI have a problem with an older computer that runs autocad 2009 architecture.
When I trie to open the file it gives the next error:
C 000000 dh exception at 78144 ba1h
I searched the internet but all the problems are with a plotter or a printer but I have the problem when I want to open the file.
The other odd fact is when I trie to open it with a new computer it opens perfectly and someone with the same old computer opened it also and there it worked fine too.
got this error on a machine here ... FATAL ERROR: Unhandled e0434f4dh Exception at 768642ebh and went through the discussion group for an answer and found it saying to remove the net framworks ... but my question is if the net framworks is corrupt on the machine with the errors, and we have the automatic updates, then why wouldn't all the machines come up with this fatal error?
View 1 Replies View RelatedI get the following error (in the event log) when C3D 2012 starts:
Service cannot be started. The file resolves to a path that is too long. The maximum length is 260 characters. [ File name = C:ProgramDataAutodeskContent ServiceServerContentServiceDBConnect.MetaStore.sdf ]
Obviously that path is NOT over 260 characters.
I am using AutoCad LT 2013, 64-bit on Windows 7 Professional. I noticed there is an update available as I was using the program. When I attempted to update Service Pack 1.1, I get this error "A problem prevented the Service Pack from being installed. Contact your system administrator. Error 1603"
View 9 Replies View RelatedIve been trying to install Adobe Photoshop CS4 trial for the past 3 days. The only reason I want to try it is because of its ability to create textures directly on models. But whenever I try to install, I get this error"Adobe Drive CS4Error:Error 1603. Fatal error during installation." Dispite it not saying that Adobe Photoshop CS4 having an error, I still get this screen ....
View 5 Replies View RelatedI am getting Error 1603. Fatal error during installation while installing photoshop Cs 6.
View 2 Replies View RelatedHave had the problem 0xc000007b caused by ilivid with LR4, easily fixed something I have to do each time there is a software update. My most recent software update of Photoshop is causing a new error message. CS6ServiceManager.exe - Application Error unable to start correctly (0xc000007b). Can't run Photoshop!!
View 3 Replies View Relatedi coded this simple utility that allows the user to edit some dbtext without using the mouse (after selection).
It works but sometimes, it seems randomly, i get a fatal error.
This is the code
public void Run(object param)
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Editor ed = doc.Editor;
[Code]....
The run function it's called from a commandmethod with the CommandFlags.Session flag.
I keep on getting the fatal error messages like FATAL ERROR: unhandled Access Violation Reading 0xffffffff Exception at 1a89fc50h, when doing simple commands such as move, copy or selecting objects. It has also occurred when I've tried to save. They can occur up to 4 times a day .
I have tried emptying my temp folders and I've ensured my copy of AutoCAD 2011 LT is up to date but these are only temporary solutions as a few days later they will appear again.
I get a fatal error (attached) when I hover over an mpolygon in a dwg file (also attached).
Map 3D 2011, SP2, Win 7 pro 64 bit.
I have tried audit - it did not fix the problem.
Just installed Map 3D 2012 and Bluebeam Revu cad version. Restarted m'puter and Message pops up, then CAD closes. Very counter productive.
Autodesk AutoCAD Map 3D 2014
Windows 7 Professional
Service Pack 1
Intel(R) Core(TM) i5-4430 CPU @ 3.00 GHz
8.00 GB RAM
Due to a "FATAL ERROR: Unhandled c0000417h" my AutoCAD 2014 crashes every time I try to print a dwg to pdf.
It seems to only occur if I print one of any number of files within a particular/specific folder.
Things I am still able to do:
I can publish the very same drawings to pdf.
I can print a dwg to pdf if it is within a different folder.
I am using AutoCad 2000 on Windows XP - and have had no problems for years. today - I went to print out a drawing, and when clicking on plot - or plot preview, it gave me: Fatal Error: Unhandled Access Violation Reading 0x0000 Exception at 5e2c36h. I thought it was just this one file, but none of the existing drawings I open will print. And they have always printed.
View 9 Replies View RelatedHow to fix this error message in Windows XP service Pack 3?
It does not allow me to use my Corel 13 and causes problems in Corel 8.I've already unchecked the Install files for Asian languages, but to no avail.
I have recently moved to 2014Lt.
When I open a second file both go super slow. I didnt have this problem with 2013.
It often then crashes the recent error no is d686468fh.
I started the drawing I have been working on for the last couple of days. I went to save it and this is what I got:
fatal error: unhandled access violation reading 0xbff247f8 exception at e47c7bd9h.
Every time I reload the program the numbers are different.
When I load a different drawing I don't have the problem.
I am getting Fatal error at the explode method in the following highlighed (red) code.
public class ExplodeDynamicBlocks
{
[CommandMethod("EDB")]
[Code].....
Also, if possible, how to combine two objectidcollection into one?
I have Autocad LT 2007 running on a PC with Windows 7.I am having problem with creating layers or just working with layers.I get this error message:
Fatal Error: Unhandled e06d7363h Exception at 7585c41fh
The second part of the message "at 7585c41fh" is different sometimes, but the first part is always the same.Then Autocad shuts down.
I am currently using ACAD Civil 3D 2014. When I am in paper space and try to plot I get a Fatal Error before I even get to the plot menu. This is only happening in 2 specific drawings and I've done a purge, audit and drawing recovery. With 8GB of Ram there should be more then enough to at least plot a 5MB drawing.
View 4 Replies View RelatedI'm getting a fatal error everytime I click on the hatch command on the home ribbon and then just press ESC before I do anything. This happens on command.. everytime. AutoCAD LT 2013 to see if they also get the same error.
View 7 Replies View RelatedSo I got a problem with a Drawing. I got 2 layouts from the same model space, the first one can be converted just as usual but when I`m trying to plot the second one I`m getting a fatal error. I already tried to copy it into a new layout and tried different PDFcreators such as PDF24 but it`s always the same. There are no special elements or such things in the layout. Ok so I just found out that the problem is the transparency because i can plot it without but i never had that problem before, i even plotted a drawing with transparency today.
(pic of the error attached)
I encountered a problem, when I try to use GetString with Keywords
Dim optString As New PromptStringOptions("Zadaj nazov: ")optString.Keywords.Add("Vypisat")Dim resPrompt As PromptResult = ed.GetString(optString)
AutoCAD crashes with FATAL ERROR on the last line.
Sometimes 3D orbit works perfect, and sometimes it causes a fatal error before you even get started with it. I originally thought it was just large 3D objects causing it, but now I think it's just a 2014 issue...because I've had simple 3d surfaces (3d polyline with a surface) that have caused it to crash, yet have other larger surfaces that orbit without issue. I'm mostly using it to compare 3D polylines to surfaces, usually on as built alignments that we're working on.
View 9 Replies View RelatedI'm working in Civil 3D 2013 and am attempting to bring in notes and blocks from a .dwt, using DesignCenter. As soon as I drag a block into my current drawing I receive a fatal error message and Civil 3D closes. I do get the option to save a recover file.
View 8 Replies View RelatedI have a function that allows the user to set a color on a modified dimension (only the text of it). However, when this function is enabled and the user wants stretch the dimension, Autocad make a fatal error and close.
Here is where it crash (in red) :
public overridebool WorldDraw(Autodesk.AutoCAD.GraphicsInterface.Drawable drawable, Autodesk.AutoCAD.GraphicsInterface.WorldDraw wd)
{
if (showText || resetText)
{
Dimension dm = (Dimension)drawable;
dm.UpgradeOpen();
[code].....
I added this (in red) but it will just turn in round in my code with another function and made the fatal error still :
Dimension dm = (Dimension)drawable;
if(!dm.IsWriteEnabled)
{
dm.UpgradeOpen();
dm.Dimclrt = dimTColor;
dm.DowngradeOpen();
}
I cannot print my layouts to pdf. Every time there is a fatal error.
It goes like this:
1. Open any drawing.
2. Select any layout.
3. File > Plot > Select PDF as printer/plotter
4. Click OK
5. Plot job progress bar appears
6. Fatal Error Message
7. Total crash, AutoCAD closes
FATAL ERROR: Unhandled c000000dh Exception at 237eb667h
It is with every drawing, different drawings, every time. It started suddenly.
I am using LT 2013. I used to have 2008. I got similar errors using 2008. I uninstalled it (after trying repair reinstall, which failed to correct the problem) and reinstalled windows, and upgraded to 2013. The problem was gone for a time and has just now restarted.