This weekend I went to render the fist vidoe and gotr an error message. "Could not complete the Render Video command because of a problem with Adobe Media Encoder".
I amusing the default settings in the render menu. Adobe media encoder - Quicktime - animation hight quality - document size 1920 x1080 - document frame rate 29.97 - field order progressive - aspect document 1.0 - all frames.
I recently installed Creative Suite CS6 Design & Web Premium. I had previously installed the CS5 version and had not un-installed it. Everything except Acrobat appeared to install correctly. When I opened Photoshop CS6 (64-bit) I noticed that it used the CS5 version Bridge.
I went into Bridge and unchecked the open at start box, closed Bridge and Photoshop and re-opened Photoshop CS6 (64-bit). When I tried to lunch Bridge from Photoshop the following message appeared in the Desktop> panel : Waiting for Bridge CS6..." Bridge CS6 did not appear despite waiting for several minutes.
I then pressed the Start button and went into the Programs listing. Under the Adobe CS6 group I found all of the applications (other than Acrobat) but Bridge CS6 (64-bit), Bridge CS6, and Media Encoder each had generic icons rather than the expected relevant Adobe icons. I tried to load each of the three by clicking on the icon. In each instance the following message appeared:
The version of this file is not compatible with the version of Windows you are running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program and then contact the software publisher.
My system is a Gateway FX6802. I am running Windows 7 Home Premium version 6.1.7601, Service Pack 1, Build 7601.The system has 9 GB of memory. I ran CS5 on the system and did not experience any difficulty with Bridge.
I'v graded a video clip with a camera raw smart filter applied to it. I try to render it out in AME and it only renders 1 frame for the length of the video.
View 2 Replies View Relatedwhen I attempt to render an animation in Photoshop CC I am finding the Adobe Media Encoder option greyed out. The only available option is to render a Photoshop Image Sequence. In CS5 I was able to use the Media Encoder to render Quicktime movies directly from Photoshop. Why would this have changed? I'm on Photoshop CC 14.1.2, running on a Mac, OSX 10.9.
View 2 Replies View RelatedI haven't been able to export (render) a small animation to Quicktime in Photoshop CC. I still have Photoshop CS5 installed and it is not a problem there. The only option I have in CC is to export to "Photoshop Image Sequence". Adobe Media Encoder is grayed out.
If it means anything, I'm using Windows 7 in a 32 bit environment, not 64.
How do I get a video render into the Adobe media encoder queue instead of doing individually?
View 2 Replies View Relatedwhen I export a timeline to Media Encoder queue, the video renders out with no audio.I have not found a repeatable way to replicate this, but when it happens, it really blows up my workflow.
Typically I: Import a ProRes 1080 clip into a fresh timeline, and only trim down the ends. Audio and Video playback great in premiere. I then, without changing anything, export to media encoder queue in h.264 1080p OR 720p (vimeo preset).
The queue runs and bang, video file with no audio.
My extended workflow is as such - once the h.264 file has arrived in the folder (it is a watchfolder), there are presets set to create OTHER Files - wav for CD, mp3 for podcast, DVD for distro, mp4 for podcast. So, as you can see, it snowballs into a trainwreck. I would also automate/schedule the podcast postings, but obviously I can't rely on media encoder/premiere to do it's job.
I even got to point to where I reboot the machine right before each original capture begins, but the error is always in the first render out of premiere.I dropped the capture into a timeline, exported as usual, and got a bad render. Did it again, this time moving the audio down a track. Still a bad render. Rebooted the Mac, tried it all again, and finally got a working render. This is the first time it has happened TWICE in a row, and I'm getting tired of it, as these renders are fairly long.
For the longest time if I ever tried to export or render a video longer than 5 minutes, my Premiere Pro or Media Encoder crashes. I don't know why but it is EXTREMELY irritating when attempting to make lengthened gaming videos. I have tried 15 different methods all online, to no avail. It always crashes around the 40% mark in Adobe Premiere and it isn't a corrupt project.
Technical Specifications:
OS NameMicrosoft Windows 7 Home PremiumVersion6.1.7601 Service Pack 1 Build 7601Other OS DescriptionNot AvailableOS ManufacturerMicrosoft CorporationSystem NameFRITZ-PCSystem ManufacturerMSISystem ModelMS-7821System Typex64-based PCProcessorIntel(R) Core(TM) i5-4670 CPU @ 3.40GHz, 3400 Mhz, 4 Core(s), 4 Logical Processor(s)BIOS Version/DateAmerican Megatrends Inc. V1.1, 5/3/2013SMBIOS Version2.7Windows DirectoryC:WindowsSystem DirectoryC:Windowssystem32Boot DeviceDeviceHarddiskVolume1LocaleUnited StatesHardware Abstraction LayerVersion = "6.1.7601.17514"User NameFritz-PCFritzTime ZoneEastern Standard TimeInstalled Physical Memory (RAM)8.00 GBTotal Physical Memory7.95 GBAvailable Physical Memory5.97 GBTotal Virtual Memory15.9 GBAvailable Virtual Memory12.4 GBPage File Space7.95 GBPage FileC:pagefile.sys
I have quite a few merged clips that the director wants me to export so that he can watch them elsewhere than the suite. If I export them individually within Premiere CC I have sound on the exports but if I use the queue function that opens Media Encoder they are mute of audio.....is this because they are merged clips?
is there a workaround other than doing them one at a time as there is alot of clips.
I have a Windows 8 64-bit system. Why Corel VideoStudio X6 has Windows Media Encoder 9 Series included in the installation package. It is not even supported on Windows 7 and 8. [URL]
View 1 Replies View RelatedI edited an online video dictionary (about 7,500 five second clips) and have them all in sequences in Premiere pro CC waiting to be exported. I hae been battling for two weeks now day in and day out to try and export... I am limited to batch exporting this project and have never had problems with adobe softwares in five years ( a great track record). I have tried many ways of importing or exporting the sequences to Media Encoder CC, and have experienced crashes every single export attempt. As soon as I add more than 5-10 clips the program crashes when I start the que. I badly need to deliver this product, any patch that will keep ME from crashing when you add more than a couple clips?
View 1 Replies View RelatedWhen I use export media in Pr CS6 and use custom settings (H.264) and click Queue when it arrives in Media Encoder none of the custom settings are there, instead it always defaults to .F4V.
View 3 Replies View RelatedMy current workflow is to use 3ds max to render image sequences of animation, then to use Media Encoder to convert them to mov files using the Quicktime Animation codec. The problem is that using these clips in Premiere prevents me from scrubbing the sequence timeline fluidly, even tho all of the files are being accessed from a Thunderbolt drive on a Macbook Pro. Even opening them in the Quicktime player causes sluggish playback. The images rendered are 1280x720. Because of the animation being frame based, I need the derived video to not drop frames like some codecs do, so the Quicktime Animation codec prevents that and it preserves the alpha channel in the images. So my question is, what can I do to improve this so that scrubbing the timeline becomes fluid?
View 16 Replies View RelatedWindows 7 64-bit | Photoshop CS5 | Wacom Intuos4 (driver up to date)
Happily painting away, when I switch to another program, be it Skype or anything else, and then come back to PS my CS5 Media Brush no longer has pressure sensitivity, etc - just like how a bruch behaves with using only the mouse.
The easy fix is to again switch out of PS, and then back, but you have to be careful not to have the pen on the tablet giving it input but rather wait until Photoshop is fully maximized again if minimized or the brush won't regain it's functionality. Do it right though, and it will regain tablet sensitivities.
Trying to conform Canon C300 MXF media from 3 different drives. My source footage is spread across 3 TB of portable drives, so I'm trying to conform each drive's footage, cache the media, then move on to the next drive.
This mostly worked, but there's about a half dozen clips that refuse to cache for some reason. Everything looks fine when the drive is plugged in - then I consolidate handles, then go to the sequence and choose CACHE MEDIA - Backburner kicks in and says 100% complete.
But then I have to quit Smoke to eject the drives and connect a different one, and when I start Smoke again, MOST of the clips are there, but some of the clips are not. They do not say Unlinked or checkboards - but they are just black. (One time it showed RED frames - WTF??). If I reconnect the HD, the clips show up, so it's obviously still reading it from the portable drive.
Is there an option to force cache individual clips?.
I tried unlinking/relinking thos problem clips, and even Hard Committing the GAP layer above - and those few clips still do not cache - even the hard commit goes black when the drive is disconnected. How is that even possible? Do I need to add an Axis Effect to force a render, then commit those frames?
why the BB would say 100% complete, but not all clips are truly cached?
SmokeUser since 2012
MacPro w/ K3
32 GB RAM
CalDigit HdPro2 RAID
When I have a CFX on a clip and I try to replace media (so I'm replacing the media under the CFX), it doesn't work. It overrights the CFX completely. Is this a bug or am I doing something wrong?
View 5 Replies View RelatedWhen importing media from my iphone I'd like to ONLY import jpgs, not the mov files. In searching, the sort option in the import dialog on "media type" should work so I can easily just select new jpg files, however this does nothing for me. Is this supposed to work? I'm running OSX 10.7.2 and LR 3.6.
View 12 Replies View RelatedI get this prompt while copying sequences between projects with gateway-linked footage, and I'm not sure what it means.
---------------------------------------------------------------------
CLIP MGT: Unmanaged media contained in selection. Store media on Wire?
---------------------------------------------------------------------
Is it asking me if I want to store a local copy or stonifize the media?
where when I try to export my video, I get a pop up window saying 'some media is offline, it will be rendered using the red media offline graphic'. in Premier pro all my media seems to be online, I have followed several different video tutorials on how to re-link media and the option to re-link media is greyed out for me as there is no media that is unlinked, so why does this message come up when trying to export? Playback in PP is fine, all media appears to be online.
Having viewed the exported video it seems that all the media which has been replaced by the red 'media offline' logo is all the .MTS files filmed on my Camcorder whereas all the GoPro footage is showing up correctly in the exported video.
Here's the text:
1. Should Media Cache Files and Media Cache Database be in separate folders? Does it matter?
2. Can I open an "in progress' project from P Pro CS4 with CC P Pro and continue editing?
X3 on Windows 7 (can replicate this on both Home Premium and Pro). I migrated from XP and am very very happy with the way X3 runs on Windows 7 but I am having a big problem. I had a library of customized Windows Media Encoder settings (different bit rates, frame sizes, etc.) for output as .WMV files. When I try to copy or customize any of the existing encoder profiles (which all work just fine) the system does not allow me to save. I have set full permissions for the logged user and made sure the directory is not read only.
View 14 Replies View RelatedI've had this problem for a few weeks now. Customer Service has been unable to provide a fix (ie complete uninstall, re-installing from scratch, new drivers, etc). I have a fairly new I7 with lots of memory and disk space and an ATI HD4670 video card that is capable of hardware encoding acceleration....I run Vista 64 bit. I also have another software package on the computer that uses this feature okay.
Corel advertises hardware encoding as a big featuire of this release of Videostudio (X3 Pro).
I've been using VideoStudio Pro X2 for the past 2 years and it has been working just fine since, up until mid last week. I was rolling right along, creating MPEG-2's of the Classic 39 Honeymooners episodes, until I got up to Episode 24, when I started getting the 'Failed to open the MPEG encoder' error message. I searched through this forum to find any possible solution and the only solutions I found were to check to see if the MPEG-2 encoder CODEC is installed, which it appears to be according to the InstalledCodec utility and to uninstall/reinstall VS, which I did. I still receive the same error message, however. What could cause it to go from working one moment, to not working the next?
I tried to attach a text file listing all of the installed codecs on my system, so you can look to see if the needed codecs are installed, however I was unable to attach the file...says 'extension not allowed'. How to upload the file.
I downloaded the trial for Video Studio X5 and have managed to make a few videos already with it (mostly desktop screen recordings in 1080p). However, after realizing how slow my renderings were, I toyed around with the settings and noticed that the Enable Hardware Encoder option is greyed out. Meaning that I cannot enable it. I can, however, enable other Hardware acceleration features.
I'm not totally sure what the issue might be since I'm pretty sure my GPU supports this feature ... or does it? Or could it be a limitation of the trial version ... ?
Currently, I'm running:
+ Windows 7 64-bit
+ EVGA Nvidia GTX 670 2GB
+ Intel i7-3770 Ivy Bridge
+ 16 GB DDR3 1600
Other hardware information can be found in my profile.
Also, system information as sourced from the Nvidia control panel:
Select allNVIDIA System Information report created on: 05/22/2012 00:53:28
System name: BODHUM
[Display]
Operating System: Windows 7 Ultimate, 64-bit (Service Pack 1)
DirectX version: 11.0
GPU processor: GeForce GTX 670
[Code]....
I need a consensus from the forum members here regarding this Service Pack 2 update (which is named Patch3.exe). I've read that it causes problems and I've read where it doesn't. As of right now, without the patch, my version is 13.6.2.36 , I think with the patch it will be .69, or is there another patch (or version) floating around out there that is more stable?
Also, under Settings>Performance the "Use Hardeware Encoder acceleration" is grayed out. How to check that thing off and what hardware are you using to get it to show up?
I completed a video and when I went to 'Create a Video File' I would receive the following error message...
"Failed to open MPEG encoder"
I'm using Ulead VideoStudio 11+. The 'vsp' file is too long...One hour fourteen minutes. I made a 'Part 1' and cut the vsp to forty-five minutes and still received the same error message.
I cut the 'vsp' to one minute thirty seconds and it would "Create a Video File'. I've never had this problem before.
It seems with Ulead VideoStudio 11+ whenever I have a problem like this I can resolve it, by backing up all the files, then removing the program, thoroughly clean the hard drive and re-install 11+.
I was trying to 'create a video file' when I received this message, 'Ulead VideoStudio [2000:1:1] Failed to open the MPEG encoder.
I've made countless movies and this is the first time I'm having this problem. Maybe I had it in 2008, but I've just turned 70 and remembering what I did then is a thing of the past!
Error message:
"Failed to open MPEG encoder".
I'm using Ulead VideoStudio 11+ and when I try to render a completed video to a file I receive this error message. The video is a little large, one hour fourteen minutes, so I cut it in half, saving it under a different name and it still gave me the same error message. However, if I render a very small clip then it renders as it's suppose to.
I've never had this trouble before. I reloaded the software for 11+ but that didn't work.
How do you get media to work
View 3 Replies View RelatedCan you print 7x5 from the 8x6 print media
View 3 Replies View RelatedWhen I open Elements 11, I get "There is no media to preview". The program was working correctly. MY catalog contains 10K photos. I have been working on a video in Premier 11 and lost the ability to connect with My Catalog. I have opened File>> My Catalogs. I see my catalog[current] but the open button is not active. How do I open My Catalog? I do have another small catalog and it will open.
View 4 Replies View Related