AutoCAD 2013 :: Unable To Save R12 DXF Files To Network Drive
Apr 22, 2013
I have some AutoCAD 2013 users in our Fabrication department who are having problems saving R12 dxf files to a network location. When they try to save they get a message that states "Unable to save to drawing N:Bend|5130Xfilename.dxf. Drawing saved to N:Bend|5130Xsav6A0D.tmp" (See attachment for actual message)
The temp file does not get saved either. They can save R12 dxf files locally and to other network locations. They are able to save 2013 dwg and dxf files with no issues. This problem just affects R12 dxf files which they need for programming pressbrakes.
They can save to 2013 dxf files and then overwrite with R12. After that they cannot save again and get the message again.
User workstations vary.
All are Dell Precision workstations and laptops
Windows 7 x64 with 16 GB of RAM
All are running Nvidia Quadro graphics cards with certified drivers
View 3 Replies
ADVERTISEMENT
Mar 13, 2013
Am seeing an issue with Photoshop7 , cannot save files to a network drive using .psd format..It says Disk space full, though there is more than 1TB of space available on the network drive..This happens when tryingto save file in .psd format using Save as option within photoshop.There is no issue in saving the same file locally and copying it fom local drive to network drive..OS is windows 7.
View 2 Replies
View Related
Jul 5, 2012
I'm copying RAW files from a shoot onto my network RAID drive in a per-album folder, from where I then import into a new LR catalog (I'm using LR 4.1) on my Windows laptop for that album.
I'm finding that editing RAW files on a network drive from a wireless laptop is awfully slow (not to mention not being able to continue the work offline somewhere else), so I'd like to cache those files on my speedy SSD drive just until I'm done editing and exporting/publishing that album.
I back up my per-album catalog onto the network folder alongside the RAW files since that's my IT-managed master repository. When I'm done editing, I'd purge the cached files and just keep the catalog previews on my limited capacity SSD.
So, is there a way to tell LR to, for one/all files imported from a location (in my case a network folder), look in an alternate location for the identical files? Since I create per-album catalogs in per-album folders, there wouldn't be filename clashing. Either LR can provide this caching behavior on its own or I'd manually copy files from the network folder to a local folder and tell LR to look there first.
I don't really want to make copies of files into secondary folders within LR since then it's a hassle to merge edits on the cached copy to its master copy (I haven't done this, but I'd imagine so).
View 4 Replies
View Related
Feb 8, 2012
I am running AutoCAD MEP 2012. I am unable to open drawings that are stored on a network drive. I continue to get a "Unhandled Access Violation Reading 0X0000 Exception at f5bfaad0h" and AutoCAD closes. If I copy that same file to the computer and make it local, it opens without any problem. All files local open just fine. Also, I am able to open the same drawing on the network from multiple other computers.
I have tried to repair AutoCAD and check all network settings on the computer, but everything appears correct.
View 5 Replies
View Related
Jan 16, 2013
I have created an action where I do some stuff with the picture and then I save the file to a shared network drive while using the "Save for Web" function. While recording the action everything works fine but when I run the action I got a error that Photoshop can't save the file because the Path does not exist / Is unavailable. It is stuck while he want's to run the "Save for Web" part of the action.
I tried the mapped path (Z:files...) and the UNC path (\fileservusersdjametfiles...) but both did not work.I am using Photoshop CS5 and Windows 7 Professional (64Bit).
View 4 Replies
View Related
Jul 6, 2012
I am using 50 AutoCAD Network License and all data is on server not on local PC. When i try to save drawing it say's unable to save. Only save as is working that also i have to give different name for the file to save.
All other software's (Like Word, Excel etc.) are fine with saving data files on the same server's. Is there any Autocad variable to be changed.
View 9 Replies
View Related
May 24, 2012
I have a newly downloaded version of AutoCAD LT 2013 that will not save files in older formats for autocad 2004 and 2007. When trying to save the user gets the following error message "One or more objects in the drawing cannot be saved to the specified format. The operation was not completed and no file was created."
I did some searching in the discussion groups and it appears that this is a known/common issue with autcad lt 2013. Is there a work around to saving it in a format that older autocad applications can view?
View 2 Replies
View Related
Jul 11, 2012
I am currently using Acad 07 on Windows 7. I save my drawings to another pc on our network. Yesterday said pc was updated to windows 7 and now I am unable to save. I get an error message reading:- Unable to save drawing Location/file name.dwg, drawing saved to drawing/filename.tmp. What is a .tmp? I can save the files on my computer then move them over but it isn't ideal
View 3 Replies
View Related
Jan 22, 2013
I have 2013 inventor/mechinical a cad did not have enought memory on c: drive added another hard drive E: need to move my files to the e drive. single seat all on this computer.
View 4 Replies
View Related
Sep 25, 2013
How do you export files to a flash drive so i can take my drawings to school?
View 3 Replies
View Related
Apr 23, 2012
I have recently installed Corel X6 and have found it to be painfully slow when opening files. At first I had thought it might be a network issue so I copied the file to a local drive and experienced the same problem.
The file is only 819Kb but it takes about 3 minutes to open the file. When I first select the file in the File Open dialogue window Corel just hangs for about 1 minute. It finally responds then takes a further 2 minutes to process and open the file.
I have turned off my antivirus software as I thought this might be a file scanning issue but still the same result.
View 14 Replies
View Related
Apr 17, 2013
I have just recently installed AutoCAD LT 2014 on Windows 7 (Running on an intel iMac through Bootcamp). Ever since then i am receiving notifications when performing a save.
AutoCAD is telling me it cannot perform the save and is creating a .tmp file in the same location on the server as the file should be.
this is causing major performance issues and happens almost every second time I attempt to perform a save. The issue is that we are getting multiple versions of the same file duplicating on the file server which is very quickly going to cause capacity issues considering most files are 2-4mb in size.
View 5 Replies
View Related
Jul 30, 2013
I recently started having trouble when I try to save a file. It started about an hour ago. I have been working on this file all day with no problems. What is happening is when I do a quick save or a save as I get an error that says "unable to save to drawing F:NNorthview SchoolsHS - Phase 5, 6 & 7NH-EPSF1A13.dwg. Drawing saved to F:NNorthview SchoolHS - Phases 5,6 & 7savACD.tmp"
If I do a save as It will say the same thing but it will delete the existing file that I tried to save over. I have to do another save as to get the file back. I think this is specific to this drawing because I have not had it happen with any other file.
I ran Recover on the two exref files as well as the working file. No errors are found. I have purged all the files and tried again but it did not work.
View 9 Replies
View Related
Apr 1, 2013
For the past couple of weeks I have been getting a message that autocad cannot save dwg because it is being accessed by another session. This doesn't happen everytime I try to save, and it happens in differant files. After hitting save 4 or 5 times it will usually let me save the dwg. but then I have to go into the folder and clean out all the temp files. I know that none of the other users in my office have the dwg open when this happens so I'm at a loss as to whats causing it.
View 7 Replies
View Related
Oct 23, 2012
I am using Map 3D 2013 on a Windows 7 machine and am getting the following error when I try to do any save, q save or saveas: "One or more objects in this drawing cannot be saved to the specified format. The operation was not completed and no file was created."
I was working in this file yesterday and received the same error at one point. I shut CAD down and did something for a few hours before I came back and everything operated normally for a little while. I was able to make edits and save. But then this morning the error is back. Even upon opening the file and immediately trying to qsave it will give me the error. I have run an audit, purged, tried to copy everything out and save to a new file. Nothing appears to be working.
We do run network licenses and I am pulling my drawings from a server, nothing is local to my machine.
View 4 Replies
View Related
Sep 23, 2013
I am not able to save any drawing file in civil 3d 2013 it comes fatal error massage . I am using windows enterprise 32 bits.
View 9 Replies
View Related
Aug 16, 2012
Several times, with different files, I get a message when I try to save a drawing using ctrl-S (or when clsoing an un-saved dwg);
Unable to save to drawing B: (file location folder)file name.
Drawing saved to B: (same file location folder)savD214.tmp
The only option is to click OK
Now there are several .tmp files in my job folder. I haven't tried to open them or anything else.
The original file will be lost if I close the drawing. I've had this happen when I clsoe the drawing before saving it - I'll get a message asking if I want to save the draiwng before closing it, and then I'll get this message, click OK, and the file will be gone. I have to to the .bak file, make a copy of it and change the file extension name to .dwg to get the file back.
If I get this message when I'm just doing a ctrl-S save, I immediately do a "save-as", copy over the original file name, and everything seems to be fine.
View 7 Replies
View Related
May 19, 2012
I want to have an application settings file stored centrally on a network drive. In the past I have used INI files, and for a Windows app would now use an app.exe.config XML file. My question is: what is the preferred technique for storing shared settings centrally for an AutoCAD .dll plug-in? It seems even for a full Windows app that the app.exe.config file can't be located on a network drive, but I could be mistaken. In any case that doesn't appear an option for a .dll plug-in. Everyone comments that INI files "are so 90s", but I can't see an alternative.
View 2 Replies
View Related
Oct 8, 2012
I have the same problem reported here : [URL]
Fresh installation of Windows Small Business 2011 standard
Disabled offline and cache on shared directories
Removed the router (server and computers in "standalone", just joined by a gigabit switch 5 ports, 2m of cables between the compure and the server)
Installed latest evaluation of Autocad LT 2013
No Antivirus; firewall settings by default
The user is the only one who access to the autocad files.
Still the problem.
The user does want work on the network anymore unless the problem is solved, which is annoying because only the server has a backup routine.
View 3 Replies
View Related
Apr 11, 2012
When I change the User Preferences "right click customization" to "Repeat Last Command" and "ENTER" then hit "Apply & Close" it reverts back to the default settings.
View 9 Replies
View Related
Mar 4, 2011
Map 3d 2011.User A connects to SDE using FDO and creates a dwg containing Mastermap data and other shape files held in SDE.User A saves Map 3D dwg on network drive that all users can access where all acad dwgs, docs etc. for that project are stored.
User B who is working on the same project at another PC tries to open the Map 3D dwg created by user A from the shared network drive but gets a "Failed to open FDO connection" error and cannot open the dwg.
Is this because Map 3D caches all data from SDE on the local drive of the PC on which the dwg was created?Is there a way around this to allow both users to access the same drawings?
View 1 Replies
View Related
Jan 20, 2012
I am using Autocad 2008. I lost all my icons when opened a drawing after disconnected my workstation off my domain network and trying to use it locally in my local drive.
in order words, How can I copy my network/server profile into my local drive so that I can run Autocad from my local drive ?(My Autocad Software is loaded in my local drive).
View 1 Replies
View Related
Aug 10, 2012
1) I'm unable to designate an internal drive as a scratch disc (non boot drive). Drive is clean, empty, I've chkdsk'd, permissions set to full, I can read and write files on it, and I'm able to designate it as scratch for Illustrator but PS6 doesn't like it. Says I don't have access.
2) I upgraded to PS6 extended (cloud) and after a week it now hangs during startup at loading Nik Color Efex Pro 4 plugin. Hangs for about 3 minutes before continuing.
View 2 Replies
View Related
May 18, 2013
In some of my DWG files I can’t able to copy paste the elements from one file to another . For example, I can’t able to copy the level marks from one file to another. Both files are located in same coordinate.
View 6 Replies
View Related
Dec 13, 2013
Since upgrading to 5.3, I have been having issues importing files to my NAS. I have tried a variety of ways of connecting it to the computer (through a wifi router and directly over ethernet, using SMB and AFP protocols) and I keep running into the same issue: LR works on it for a while, then tells me that all files are unsupported or damaged. Sometimes, one manages to get through and is imported correctly, but that's it.
The files are valid, Photo Mechanic imports them without problems. LR import the files correctly to the internal drive of the computer.
The main machine is a 27" iMac running OS X 10.9. The NAS is a Synology DS411j running the latest DSM (4.3).
View 3 Replies
View Related
Jun 16, 2013
is it possible to work with the catalogs in version 5 on a networkdrive?
View 2 Replies
View Related
Dec 20, 2012
The option to save a file as .jpg or .bmp no longer shows in my pull down menu following a reinstall after a crash.
View 10 Replies
View Related
Mar 4, 2014
What do I need to do to be able to once again save files as pdf with out freezing up AI
View 4 Replies
View Related
Jun 13, 2012
I have a large scan project (Scene 5.0's new file structure) that contains a few registered workspaces (*.fws) and I would like to import at least one into AutoCAD 2013. I followed the workflow of going to Insert>Point Cloud>Create Point Cloud, and I selected the *.fws that I wanted to import (or rather have indexed into a *.PCG).
As soon as I hit 'Create' I get an error that says 'FAILURE! Fail to open scan file" and nothing happens. I can import *.fls, but they are not registered.
Does FARO not support AutoCAD 2013?
View 5 Replies
View Related
Jan 7, 2014
I have a mac with autodesk 2014 on it. I am trying to import a step file but after I select what to import nothing happens.
View 4 Replies
View Related
Jun 1, 2013
I have tried to export a DXF model to SAT via the Export option in the File menu. However, I do not see any SAT file generated and there is no message that the export attempt was unsuccessful. How to approach this problem?
View 8 Replies
View Related
