AutoCAD 2013 :: Unable To Save Message?
Apr 1, 2013
For the past couple of weeks I have been getting a message that autocad cannot save dwg because it is being accessed by another session. This doesn't happen everytime I try to save, and it happens in differant files. After hitting save 4 or 5 times it will usually let me save the dwg. but then I have to go into the folder and clean out all the temp files. I know that none of the other users in my office have the dwg open when this happens so I'm at a loss as to whats causing it.
View 7 Replies
ADVERTISEMENT
Aug 16, 2012
Several times, with different files, I get a message when I try to save a drawing using ctrl-S (or when clsoing an un-saved dwg);
Unable to save to drawing B: (file location folder)file name.
Drawing saved to B: (same file location folder)savD214.tmp
The only option is to click OK
Now there are several .tmp files in my job folder. I haven't tried to open them or anything else.
The original file will be lost if I close the drawing. I've had this happen when I clsoe the drawing before saving it - I'll get a message asking if I want to save the draiwng before closing it, and then I'll get this message, click OK, and the file will be gone. I have to to the .bak file, make a copy of it and change the file extension name to .dwg to get the file back.
If I get this message when I'm just doing a ctrl-S save, I immediately do a "save-as", copy over the original file name, and everything seems to be fine.
View 7 Replies
View Related
Oct 2, 2012
I am using AutoCAD 2012 and I have an Issue that comes up once in a while. I will save the drawing that I am working in and a dialog box pops up with "AutoCAD Message. It says that it is unable to save to drawing, then lists the string where the drawing is found. Instead of saving as a .dwg, it creates a .tmp of the drawing. If I click the okay in the box it disappears and I can then resave the drawing as a .dwg. Lately it will even go so far as to lock the drawing and allow it to be only opened as a read only file.
View 1 Replies
View Related
Oct 2, 2012
I am unable to save an image as a jpg file!!! every time I try, I get the following error: "Not A Regular File"
I can save as png, but not jpg!!! the original format was psd, that error message came up when saving as jpg... when I saved as png, I closed Gimp and reopened the png file, but I STILL get that error message when saving as jpg!!
View 1 Replies
View Related
Jul 30, 2013
I recently started having trouble when I try to save a file. It started about an hour ago. I have been working on this file all day with no problems. What is happening is when I do a quick save or a save as I get an error that says "unable to save to drawing F:NNorthview SchoolsHS - Phase 5, 6 & 7NH-EPSF1A13.dwg. Drawing saved to F:NNorthview SchoolHS - Phases 5,6 & 7savACD.tmp"
If I do a save as It will say the same thing but it will delete the existing file that I tried to save over. I have to do another save as to get the file back. I think this is specific to this drawing because I have not had it happen with any other file.
I ran Recover on the two exref files as well as the working file. No errors are found. I have purged all the files and tried again but it did not work.
View 9 Replies
View Related
Oct 23, 2012
I am using Map 3D 2013 on a Windows 7 machine and am getting the following error when I try to do any save, q save or saveas: "One or more objects in this drawing cannot be saved to the specified format. The operation was not completed and no file was created."
I was working in this file yesterday and received the same error at one point. I shut CAD down and did something for a few hours before I came back and everything operated normally for a little while. I was able to make edits and save. But then this morning the error is back. Even upon opening the file and immediately trying to qsave it will give me the error. I have run an audit, purged, tried to copy everything out and save to a new file. Nothing appears to be working.
We do run network licenses and I am pulling my drawings from a server, nothing is local to my machine.
View 4 Replies
View Related
Sep 23, 2013
I am not able to save any drawing file in civil 3d 2013 it comes fatal error massage . I am using windows enterprise 32 bits.
View 9 Replies
View Related
Jul 6, 2012
I am using 50 AutoCAD Network License and all data is on server not on local PC. When i try to save drawing it say's unable to save. Only save as is working that also i have to give different name for the file to save.
All other software's (Like Word, Excel etc.) are fine with saving data files on the same server's. Is there any Autocad variable to be changed.
View 9 Replies
View Related
May 24, 2012
I have a newly downloaded version of AutoCAD LT 2013 that will not save files in older formats for autocad 2004 and 2007. When trying to save the user gets the following error message "One or more objects in the drawing cannot be saved to the specified format. The operation was not completed and no file was created."
I did some searching in the discussion groups and it appears that this is a known/common issue with autcad lt 2013. Is there a work around to saving it in a format that older autocad applications can view?
View 2 Replies
View Related
Apr 22, 2013
I have some AutoCAD 2013 users in our Fabrication department who are having problems saving R12 dxf files to a network location. When they try to save they get a message that states "Unable to save to drawing N:Bend|5130Xfilename.dxf. Drawing saved to N:Bend|5130Xsav6A0D.tmp" (See attachment for actual message)
The temp file does not get saved either. They can save R12 dxf files locally and to other network locations. They are able to save 2013 dwg and dxf files with no issues. This problem just affects R12 dxf files which they need for programming pressbrakes.
They can save to 2013 dxf files and then overwrite with R12. After that they cannot save again and get the message again.
User workstations vary.
All are Dell Precision workstations and laptops
Windows 7 x64 with 16 GB of RAM
All are running Nvidia Quadro graphics cards with certified drivers
View 3 Replies
View Related
Oct 8, 2012
I have the same problem reported here : [URL]
Fresh installation of Windows Small Business 2011 standard
Disabled offline and cache on shared directories
Removed the router (server and computers in "standalone", just joined by a gigabit switch 5 ports, 2m of cables between the compure and the server)
Installed latest evaluation of Autocad LT 2013
No Antivirus; firewall settings by default
The user is the only one who access to the autocad files.
Still the problem.
The user does want work on the network anymore unless the problem is solved, which is annoying because only the server has a backup routine.
View 3 Replies
View Related
Apr 11, 2012
When I change the User Preferences "right click customization" to "Repeat Last Command" and "ENTER" then hit "Apply & Close" it reverts back to the default settings.
View 9 Replies
View Related
Dec 15, 2013
I use autocad architecture 2013 and it works just fine until the save turns to qsave whenever i want to save a drawing by save, save as and ctrl+s it works as qsave..how can I turn it back to SAVE ?
View 9 Replies
View Related
Jan 10, 2012
My autosave keeps giving me this message when ever it goes to save. What does this mean?
View 9 Replies
View Related
Sep 18, 2013
when I invoke the Revcloud command and type "O" for options, I get a message box that says "Unable to open dialog box", if I close that message box I'm able to draw cloud lines in my drawing but I have no control of the cloud since I can not access the options dialog box.
My Revcloud was working fine last week.
why I'm getting the "Unable to open dialog box" message?
View 3 Replies
View Related
Mar 17, 2011
I'm using Architecture 2011 trial and it generates good rendering, but after adjusting sun angle (time), I received a message: Make sure the destination directory is writable and that the disk is not full. Rendering aborted.
View 1 Replies
View Related
Nov 19, 2013
I'm getting this message after creating a new tube run: "H6705-51.ipt can only be saved in the context of H6705.Tube and Pipe Runs.iam"
I've never had this error come up. I added a tube run to an assembly and just couldn't save the new run. I tried opening the main tube run file and also the individual tube run but I get the same kind of error message.
View 1 Replies
View Related
Sep 4, 2013
I attached two external DWG using the add source drawings in map, then I queried a single drawing into my current drawing. Which I must admit was pretty cool. However know every time I save, autosave, or Publish I get the message below.
View 9 Replies
View Related
Feb 7, 2013
We have some users that get the message attached when they publish and plot. How do we stop it?
View 5 Replies
View Related
Feb 1, 2013
I'm using AutoCAD 2013 and I get a fatal error when it pulls up a print preview. If I have "Publish in Backgound" selected it proceeds to print. The error only appears to exisit when it pulling up the print preview. I have installed sp 1.1. I've repaired and reinstalled also. My AutoCAD 2012 is publishing fine.
View 6 Replies
View Related
May 25, 2012
i am using autocad 2013 student version at home and at college i am using autocad 2012. so when i create drawing in 2013,dosent open on 2012"it says incompatible version". i like to save all my dwg files automatically in 2011 format, i dont want to click save as and change it 2011 format.what i need is whenever i finsh working on drawing, if click save it should automatically save in 2011 format.
View 2 Replies
View Related
Mar 25, 2014
I get a message saying "Application unable to start (0xc000007b)
View 2 Replies
View Related
Aug 4, 2013
I have been working on a drawing that was originally created from an AutoCAD 2004 version, and I have since been working on it in AutoCAD 2013 student version. The drawing from autoCAD 2004 was of plans for a house and i saved them over to model them in autoCAD 2013.
I have since finished the model and tried to import the drawing into 3Ds max 3013 cersion and a message reading "ObjectDBX Classes" appears. I have read up about this and tried to download an AutoCAD 2004 ObjectDBX Classes Object enabler. I am unable to download this as I do not have a copy of AutoCAD 2004, this is only available at my work.
I only have AutoCAD 2013 and 3Ds max 2013 on my home computer, not at my work.
View 6 Replies
View Related
Apr 15, 2013
is there a way to suppress the "missing shape file"-message.
I believe there was a checkbox to check this every time you open a drawing. I must have checked it, and now autocad always asks for it.
View 7 Replies
View Related
Jun 14, 2012
From the start, I wasn't able to save to jpeg without getting a dcm extension (no jpg extension). However, if I saved to Multi-picture Format, I would get the familiar .jpg and everything worked fine for a while. This morning I cannot find a file format in "save as" that results in the .jpg file extension.
View 2 Replies
View Related
Jun 16, 2012
I downloaded the LR4 upgrade. LR4 Image shows up on my desktop, dmg icon and READMe shows up, when I double click on dmg, I get message saying unable to open. Using Mac Pro and upgrading from LR3.
View 7 Replies
View Related
Oct 31, 2013
I'm trying to update my Smugmug Publish Plugin from version 2.0.3.1 to the current 2.0.7.0. I keep getting the message "Unable to perform Plugin Update. Failed to move the old plugin out of the way."
View 5 Replies
View Related
Dec 3, 2012
Everytime we insert a block from our library, a message pops stating:
"This application has detected a mixed version of AEC objects participating in this operation.
Newer AEC objects will be disallowd from participating in this operation."
I already converted all blocks to AutoCAD with Exploded AEC Objects, but the message persists.
View 2 Replies
View Related
Jul 26, 2012
I've started getting this random errror message today when doing random commands, such as switching from model space to my layouts and vice versa, or the undo command, "unrecognized version and cannot be read" and then it gives me the Ok/Cancel option. I hit OK, then says "is not recognized syntax, select OK to ignore or Cancel to abort" And I hit ok, and the command is carried out, but slowly.
I've looked this error up and it seems to have been around since 2000. It looks like it has something to do with print files and scripts, but we haven't added or changed any in years. Although I have been having printer issues. Yesterday this started and it's still happening - when I press the print button, no matter what printer is set to, it would take 2 minutes to see the dialog box, 2 minutes for just a preview, then 2 minutes or more to start printing. It doesn't sound like a long time, but it adds up! And it's still doing that on CAD alone... printing is quick in other programs.
I'm on AutoCAD 2013, Windows 7, 64 bit OS.
View 6 Replies
View Related
Apr 15, 2013
We use scripts a fair bit in acadLT & from the Desktop icon. The 2014 behavior has changed in that it displays a warning (screengrab attached) before allowing the script to load.
This is going to be a pain for users. I can't see a way to add a folder as a trusted source in LT.
View 9 Replies
View Related
Apr 23, 2012
I have recently installed Civil 3D 2013 and was configuring my options to how I have done so for the last few year and when I tried to change the message window font from the default Courier new to Courier I could not find said font. How to get this font or if it has been removed from 2013?
View 1 Replies
View Related
