AutoCAD 2013 :: Unable To Save DWG File
Sep 23, 2013I am not able to save any drawing file in civil 3d 2013 it comes fatal error massage . I am using windows enterprise 32 bits.
View 9 RepliesI am not able to save any drawing file in civil 3d 2013 it comes fatal error massage . I am using windows enterprise 32 bits.
View 9 RepliesI recently started having trouble when I try to save a file. It started about an hour ago. I have been working on this file all day with no problems. What is happening is when I do a quick save or a save as I get an error that says "unable to save to drawing F:NNorthview SchoolsHS - Phase 5, 6 & 7NH-EPSF1A13.dwg. Drawing saved to F:NNorthview SchoolHS - Phases 5,6 & 7savACD.tmp"
If I do a save as It will say the same thing but it will delete the existing file that I tried to save over. I have to do another save as to get the file back. I think this is specific to this drawing because I have not had it happen with any other file.
I ran Recover on the two exref files as well as the working file. No errors are found. I have purged all the files and tried again but it did not work.
For the past couple of weeks I have been getting a message that autocad cannot save dwg because it is being accessed by another session. This doesn't happen everytime I try to save, and it happens in differant files. After hitting save 4 or 5 times it will usually let me save the dwg. but then I have to go into the folder and clean out all the temp files. I know that none of the other users in my office have the dwg open when this happens so I'm at a loss as to whats causing it.
View 7 Replies View RelatedI am using Map 3D 2013 on a Windows 7 machine and am getting the following error when I try to do any save, q save or saveas: "One or more objects in this drawing cannot be saved to the specified format. The operation was not completed and no file was created."
I was working in this file yesterday and received the same error at one point. I shut CAD down and did something for a few hours before I came back and everything operated normally for a little while. I was able to make edits and save. But then this morning the error is back. Even upon opening the file and immediately trying to qsave it will give me the error. I have run an audit, purged, tried to copy everything out and save to a new file. Nothing appears to be working.
We do run network licenses and I am pulling my drawings from a server, nothing is local to my machine.
I am using 50 AutoCAD Network License and all data is on server not on local PC. When i try to save drawing it say's unable to save. Only save as is working that also i have to give different name for the file to save.
All other software's (Like Word, Excel etc.) are fine with saving data files on the same server's. Is there any Autocad variable to be changed.
I found this error a bit strange, my colleague it trying to save a file and this error keeps on coming out (see attachments). When we try to save it, it only saves as a temp file. When we try to open up the temp file and try to save it, it still doesn't allow us to do. Also, when we cancel the save, the original file will be gone and he will lost all of his data. Below are the specs of the computer and version of the AutoCAD.
Computer: DELL Precision T5500
OS: Windows 7 Ult
AutoCAD Version: 2011
Also, we're using ProSteel Series 3 as well. We tried saving the file using ProSteel and just AutoCAD but it didn't do the trick. I've tried some options (listed below) that might get it to work but still no luck.
1. Restart the computer.
2. Repair / Reinstall AutoCAD.
3. Give permission to the folder (read from the forum).
Several times, with different files, I get a message when I try to save a drawing using ctrl-S (or when clsoing an un-saved dwg);
Unable to save to drawing B: (file location folder)file name.
Drawing saved to B: (same file location folder)savD214.tmp
The only option is to click OK
Now there are several .tmp files in my job folder. I haven't tried to open them or anything else.
The original file will be lost if I close the drawing. I've had this happen when I clsoe the drawing before saving it - I'll get a message asking if I want to save the draiwng before closing it, and then I'll get this message, click OK, and the file will be gone. I have to to the .bak file, make a copy of it and change the file extension name to .dwg to get the file back.
If I get this message when I'm just doing a ctrl-S save, I immediately do a "save-as", copy over the original file name, and everything seems to be fine.
From the start, I wasn't able to save to jpeg without getting a dcm extension (no jpg extension). However, if I saved to Multi-picture Format, I would get the familiar .jpg and everything worked fine for a while. This morning I cannot find a file format in "save as" that results in the .jpg file extension.
View 2 Replies View RelatedI have a newly downloaded version of AutoCAD LT 2013 that will not save files in older formats for autocad 2004 and 2007. When trying to save the user gets the following error message "One or more objects in the drawing cannot be saved to the specified format. The operation was not completed and no file was created."
I did some searching in the discussion groups and it appears that this is a known/common issue with autcad lt 2013. Is there a work around to saving it in a format that older autocad applications can view?
I have some AutoCAD 2013 users in our Fabrication department who are having problems saving R12 dxf files to a network location. When they try to save they get a message that states "Unable to save to drawing N:Bend|5130Xfilename.dxf. Drawing saved to N:Bend|5130Xsav6A0D.tmp" (See attachment for actual message)
The temp file does not get saved either. They can save R12 dxf files locally and to other network locations. They are able to save 2013 dwg and dxf files with no issues. This problem just affects R12 dxf files which they need for programming pressbrakes.
They can save to 2013 dxf files and then overwrite with R12. After that they cannot save again and get the message again.
User workstations vary.
All are Dell Precision workstations and laptops
Windows 7 x64 with 16 GB of RAM
All are running Nvidia Quadro graphics cards with certified drivers
I have the same problem reported here : [URL]
Fresh installation of Windows Small Business 2011 standard
Disabled offline and cache on shared directories
Removed the router (server and computers in "standalone", just joined by a gigabit switch 5 ports, 2m of cables between the compure and the server)
Installed latest evaluation of Autocad LT 2013
No Antivirus; firewall settings by default
The user is the only one who access to the autocad files.
Still the problem.
The user does want work on the network anymore unless the problem is solved, which is annoying because only the server has a backup routine.
When I change the User Preferences "right click customization" to "Repeat Last Command" and "ENTER" then hit "Apply & Close" it reverts back to the default settings.
View 9 Replies View RelatedHave an easy file open and am trying to save a copy with a new name and Inventor either does nothing or crashes. Original full path and file name contains 243 characters (counting from drive letter to extension) New one will have 247 characters.
This is supposedly within the path/file name character limits for windows 7, which according to the ms website is 260 minus one for the null character at the end making it 259. So I am over 10 characters shy of the limit dictated by the OS.
Is inventor placing a stricter limit on the number of characters in the full path/file name? If so, why?
Obviously, working up the tree and adjusting upper level folder names is not an option as that would break every link in every assembly at that level or lower.
It only happens with this one file so far. It is a STEP file. I open it in Inventor and then when I hit save it gives me an error. The system cannot find the path specified.
The database in C:Users
stalkerDocumentsInventorDesktopAssetCreation2Imported ComponentsC731222M-U2 68514423656.ipt could not be saved.The system cannot find the path specified.The database in C:Users stalkerDocumentsInventorDesktopAssetCreation2Imported ComponentsC731222M-U2 11505_3.ipt could not be saved.The system cannot find the path specified.
I have tried to save it on two different computers with two different projects and I get the same error. I have never ran into this problem before and I open and save STEP files often.
I am having problems with an error message relating to what appears to be a corrupted design data file. I am unable to save changes in my dwg to my design data file. I get this message:
Style library (C:UsersPublicDocumentsAutodeskInventor 2011Design Data) cannot be saved because it is damaged.If I attempt to copy a view in a dwg to another sheet or move it using the browser, I get the following error:
Paste View: problems encountered while executing this command.
Invalid XML value for 'SubstituteDisplayUnit'. Expected 'bool' received '44' in file:///C:/Users/Public/Documents/Autodesk/Inventor%202011/Design%20Data/PartsList.xml.
Invalid XML value for 'SubstituteFractionalFormat'. Expected 'bool' received '255' in file:///C:/Users/Public/Documents/Autodesk/Inventor%202011/Design%20Data/PartsList.xml.
I have also noticed that if I multi select components with ipropWiz5 and attempt to change the part name - it fails.I have tried reinstall in Inventor, ipropWiz5, etc. But to no avail.
I have autocad civil 3d 2008 in my pc. From last 2 days I got a different problem i.e. when I am selecting open / save command from File menu graphical file select explorer is not opening just message in the command window . Previously I used to select files using graphical file explorer.
View 6 Replies View RelatedI have tried to import a DWG-file to my drawing. But it does not work. The XREF-file just appears as dots on the screen. The DWG-file I try to import has another UCS. Is that the problem?
I can do it the opposite way, import the file with the normal World-UCS into the file the different UCS.
I'm having some difficulty with a new issue that is occuring:I have a 3D model that I'm attempting to render. It has rendered recently with no issues. Now, this morning, I get the following error message:
Unable to create output file - Make sure destination directory is writable and that the disk is not full. Rendering aborted.The drive is only approx. 30% full. I've closed/reopened the file to no avail.Also, I've closed/restarted ACAD.It always seems that AutoCAD acts goofy whenever I have a deadline.
I just loaded AutoCAD 2013 and have loaded Express tools but can't access the tools.
I get a message when I open dwgs "**Express Tools** - Unable to load acetutil.arx"
In fact I can't load any .arx files.
I have a PSD file I have been working on in CS3. This was created from a .nef raw file and saved in 16 bits/channel.
When I go to save the image as a jpeg and convert back to 8 bits/channel Image => Mode => 16 bits/channel is selected and greyed out, along with the 8 bits/channel option. So at the moment I am unable to save the image the image as a jpeg.
I am using a licensed version of Photoshop CS5, already updated to the latest patch. However, for some reason my copy of Photoshop seems to be missing the option to save a file as .tga.
From reading multiple forum posts relating to Photoshop, the function to save as .tga should already be built in, and not require a plugin.
There may also be some other missing file formats that I am not aware of.
Is there a way to save images as a part of the dwg file?
Copying and pasting images to AutoCAD requires keeping these images in their places to avoid missing them in the dwg file
Is there a way to save these images in the file to become as a part of the file itself the same way we do in the Word and Arcgis?
When I try to save a small jpg file I get the following:
"Because of the limitations of the specified file (and possibly the save options you've selected) the saved file will be limited to a merged image. Would you like to continue?"
I noticed that my computer was slowing up, BIG time. This thing's got dual quad core Xeon, 12gb DDR3, ATI FireGL V8600, etc. I could hear it processing something constantly and as I was in CAD I couldn't really do anything. When I opened the task manager and looked at the processes, "accoreconsole. exe" (an AutoCAD component) was using 10.5gb of memory. On my performance tab, my memory was maxed at 11.5gb for at least a half hour.
Today, I dealt with it all day long by ending the process whenever I'd notice it on the list of processes, or if the computer suddenly began to lag. I've also been having trouble with Dropbox. Not sure if this would at all be related but, if I try to save a file to a shared dropbox folder, it gets to 81% and freezes with the (Not Responding) message up top. I can save just fine to my network folder though.
I am using Photoshop CS6. I am unable to save a 8bit tiff or psd file as a jpeg. When I choose JPEG format .iff is attached to the file. When I open the same file in CS5 it works correctly. Whichever format I attempt to save as it selects the suffix for the format above. I have downloaded again but no change.
View 3 Replies View RelatedSuddenly I can't save my PSD files as JPEG file without CS6 wanting to turn them into tiff files. Keeps prompting me to to choose from a drop down menu as Maya or Amiga files.
I've checked to be sure my file is set for 8 bits and srgb. Not working with video files of any sort. In fact, I've tried saving past PSD files as JPEG and it's giving me the same iff prompt.
please help me, when i go to save my image as a targa file it doesnt allow me too tick the alpha channel box, i need to save it as a targa file aswell, how can i sort this?
View 1 Replies View RelatedI am unable to save an image as a jpg file!!! every time I try, I get the following error: "Not A Regular File"
I can save as png, but not jpg!!! the original format was psd, that error message came up when saving as jpg... when I saved as png, I closed Gimp and reopened the png file, but I STILL get that error message when saving as jpg!!
I can't open a new Illustrator file. It sends me this error: Can't create a new illustration. Problems occurred while saving the print file.I opened a previous document created in CC, but it will not allow me to copy and paste items from one doc to another. I have rebooted with no avail.
View 5 Replies View RelatedUsing X5 suite. Just installed Windows 7 on my stand alone system. Now when I make a change to a file and attempt to resave (Save) it, the message box says the file is "Read Only" and asks me to save under another name.
View 5 Replies View RelatedI use autocad architecture 2013 and it works just fine until the save turns to qsave whenever i want to save a drawing by save, save as and ctrl+s it works as qsave..how can I turn it back to SAVE ?
View 9 Replies View Related