AutoCAD 2013 :: License Transfer Utility (LTU) Does Not Open?
Apr 26, 2013
I've downloaded and installed AutoCAD 2014 using one of our subscription licenses in order to review it before putting it on other machines (for the purpose of bug-checking and trying out new features). I also have a Map3D subscription license for which Autodesk offered me a free trial upgrade (for this subscription term) to Infrastructure Design Suite (IDS).
While going through the steps for installing IDS, I noticed that the IDS license includes a copy of AutoCAD. I cancelled it before installation and tried to use the LTU to export my current 2014 license. However, when I try to open the LTU, the Windows working icon spins for a bit then nothing happens. It works for my 2013 license but not 2014.
View 9 Replies
ADVERTISEMENT
Dec 26, 2013
We have 5 seats of Autocad LT 2013 and I need to change/upgrade their pc. I need to deactivate the licenses so that i can transfer or activate to the new computer but License Export Confirmation is failed. the computer is connected to the internet. I tried many times but still no luck.
View 2 Replies
View Related
Jun 20, 2012
I have a client working with AutoCAD 2011 (I believe) that is trying to transfer the license to another computer... But on the other computer the license transfer utility is not there... What would cause that?
View 3 Replies
View Related
May 1, 2012
I am trying to export my license so i can work from home but the utility isn't working.
I always get that message:
License Export Confirmation
Product: AutoCAD 2010
Serial number: 351-XXXXXXX
Export Request Failed
The serial number you entered is not valid. Try again. (1)
Click the "Try Again" link to resubmit the request.
Try again
Error reference:1
The number is the right one and it didn't create any error when installing...
Why does AutoDesk doesn't want me to work from home?
View 9 Replies
View Related
Feb 15, 2013
I have installed AutoCAD 2010 onto my laptop (Mac Book - VMware Fusion). All has installed ok
I exported my AutoCAD liscense from my work machine - again all fine. But on my laptop i dont have the License Transfer Utitlity to import it. I have performed a search and it finds my 3DMax LTU but not my Autocad one
View 1 Replies
View Related
Jul 21, 2012
I've reinstalled my OS (WindowsXP SP3) and installed 3ds Max 2012 again. It have run succesful. But it doesn't export license. While trying to export it says "Export Request Failed. The maximum number of exports for this serial number has been reached. You may not export more licenses than you have purchased. Error reference:36" It seems as my old licence is on server.
View 4 Replies
View Related
Nov 14, 2013
Do I need to use the portable license utility to uninstall and then reinstall a single user AutoCAD LT 2009 permanently from one laptop to another? If so do I select "computers" then "remove"?
View 1 Replies
View Related
Aug 7, 2012
I've installed the LM Tools license manager on a network server to distribute out floating license of AutoCAD 2010. The network license currently has 5 floating licenses for AutoCAD 2010. When I try and install the AutoCAD 2010 software on a client machine and go under "Install Tools and Utilities" I expect to see a choice for the Network License Activation Utility. Unfortunately all I get is the options to install the License Manager (LM Tools), CAD Manager Tools, and SAMreport-Lite. Nothing indicating an Activation Utility.
I may just be very oblivious but I'm not sure how to activate the program with the license server when I can't install the utility to do so. Am I missing a step somewhere? I have a feeling the answer is very obvious but I unfortunately can't see it. The SN and Product Key are entered correctly and should reflect the type of license(s) they are.
View 6 Replies
View Related
Apr 13, 2012
Can I transfer my license back and forth from my laptop (32bit) and my work station (64bit) using the license transfer utility?
View 3 Replies
View Related
Sep 3, 2013
i have part exchanged my iMac for a new version. i did not migrate my applications and i now want to trasnfer the license from the old computer to the new one.
View 3 Replies
View Related
Apr 28, 2008
I would like to dump my Windows machine (tied to a large cinder block, in the East river I was thinking) and get a Mac. However, I purchased Creative Suite CS3, the academic version, for Windows. Does Adobe support a license trasfer so that I don't have to purchase the mac version, or just pay a nominal fee for the disks?
View 2 Replies
View Related
Jul 31, 2009
I have CS2 on my broken no longer working Mac, I have the activation key, I bought a PC running Vista 64 bits. I'd like to upgrade to CS4 using my CS2 activation key, CS2 will not be on the PC. Can I do this? how?
View 3 Replies
View Related
May 29, 2013
I'm trying to transfer my Smoke 2013 License from one system to another and can not start up the LUT utility to do the transfer process. Can I uninstall Smoke 2013 and reinstall it to make that happen?
View 1 Replies
View Related
Nov 14, 2013
I was wondering if there was a way to import devices on the same rung but in parallel. In addition, maybe even sereral devices going into another (ex: 3 phase motor).
View 3 Replies
View Related
Jun 24, 2013
We just installed AutoCAD 2013 migrating from AutoCAD 2010 so missed a few releases."Create View" seems like a great utility for detailing, but I was unable to get it to work. Is it something as obvious as only works with 3D models, or what?! Does special view window [parent view] have to be set up intially?
View 4 Replies
View Related
Aug 13, 2013
I installed the Network License Manager in a Windows 2008 Server ( I installed theNLM using the CD of AutoCAD 2013). The AutoCAD 2013 works fine in the clientmachines, but the 2011 and 2012 version don´t. In the page of Autodesk, on ManageSerial Numbers, I can see the Serial Number for 2011, 2012 and 2013 Suites. Why theAutoCAD 2011/2012 don´t work in the client machines? Note: in the 2011/2012 versionappears the message " A valid license could not be obtained by the network licensemanager. If you are still unable to access a license, contact your systemadministrator. Error [-96.7.11001] ".
View 1 Replies
View Related
Jul 24, 2013
License Recovery will not load or open after downloading it. What do I need to do to get CS 4 to work
View 1 Replies
View Related
Jul 18, 2012
I just gave one of my drafters a new PC with AutoCAD 2013 and 2012 on it. We migrated the settings from her old pc with with 2012 to the new PC. All settings are correct except for the plotter. She had custom page setup that was used on all her drawings and that did not transfer. We setup a new one with the same settings but that requires us to reapply to every drawing.
Isn't there an easy way to do transfer these settings? If we choose the page setup most of the time it just goes back to none and a lot of the time it isn't even an option.
View 9 Replies
View Related
May 17, 2012
I hate having to setup one pc to all the autocad setting that we need and then having to go do 27 more. I want to take my exact setup, menu, system variables, colors, file locations...everything and apply it to 27 more computers. We have tried using profiles but it only coppies over a few things and some are still missing. Is there are way to copy everything?
View 9 Replies
View Related
Oct 9, 2013
I am trying to transfer a standalone copy of autocad 2013 from one machine to another. I have already uninstalled it from the old pc, and when I got to install it on the new pc it asks for registration. When I put in the numbers it tells me that it is not valid.
How can i De-activate it from the old pc if it is already uninstalled?
View 9 Replies
View Related
Aug 24, 2013
When I go from model tab to layout 1 the drawing does not transfer over. I have went on youtube and looked and even watch the instructor video. Everyone's just transfers right over. mine does not.
View 9 Replies
View Related
Aug 12, 2013
how is possible to transfer library from local Desktop Content in Inventor 2013 do Autodesk vaulet Server 2014 and vice versa? I got an version error.
View 4 Replies
View Related
Apr 23, 2013
The mother board in my old PC went out, I bought a new one with Windows 8. Loaded Autocad 13 and want to transfer all my settings from old hard drive (now a slave) to the new one.
View 7 Replies
View Related
Mar 4, 2013
At our school we've got a 60 seat network license for AutoCAD 2013. It is controlled by flexlm. Now, one of our teacher, who travels a lot, needs one of the licenses permanently on his notebook.
Can I extract one of the 60 licenses from the flexlm manager and transfer it permanently to the notebook? If yes, is there a special software for it or is there a documentation, a "how-to"?
View 1 Replies
View Related
Jul 14, 2012
I can't open a PS file sent by a friend, she sent it by wetransfer, the file did fall on desktop with name given in save before downloading.Looks like white page with bent top right corner, PS says Could not complete your request because PS Does not recognize thin kind of file.
View 4 Replies
View Related
Aug 2, 2012
I'm trying to transfer Pro E files into Revit MEP 2013?
.stp format doesn't work.
View 1 Replies
View Related
Sep 24, 2012
I have recently been informed that my Revit 2013 is not compatible with the classes that I am taking. I have installed Revit 2012, but my projects cannot be opened in 2012. Is there a better or a way at all to transfer these projects?
View 2 Replies
View Related
Dec 28, 2012
Autocad MEP 2013 was working fine until I installed SP1 yesterday.
Now when type in open the dialog comes up (not a filedia issue). When I click the "look in" pull-down in the open dialog it goes blank and I am unable to browse any folders. I've tried rebooting.. Should I reinstall?
View 1 Replies
View Related
Jan 2, 2013
First: I ordered the Smoke 2013 (floating-)licence through a german reseller a week ago and I still got no answer. Is this a normal "new years eve" delay?
Second: The Smoke installation is on a computer that's OS was actually cloned from another computer. The HostName, LocalHostName and ComputerName were changed, but Backburner still insists in using the "original" name given at the OS-Installation. So if the other "clone-computer" is running, Backburner gets in trouble and is stuck on waiting. During the troubleshooting process I turned on websharing to access [URL] ..... This led to the result, that anytime i restart the machine the computername is changed to 0.0.0.0 and the backburner wount work. No way, yet, to bring this back to normal.
Third: Waiting for the smoke-licence I already begun working on the project. Now it seems that I'll have to do a clean install of the system to get it finally running. But I do not want to loose the work so far. Is there a way to bring the actual project back into an new installation of OS/Smoke without having to archive it which does not work at the moment?
View 2 Replies
View Related
Jul 29, 2012
i get the following error msg "an autodesk product failed to send the required value for UPITOKEN. the error report sent to autodesk may be incomplete." and then another one also come "FATAL ERROR: unhandled e06d7363h exception at 75b19617h". then finally close.
View 3 Replies
View Related
Dec 6, 2010
I am laying out a pressure sewer. I have defined an alignment and profile for the route. I want to show the utility crossings (electric, gas, water, etc.) in plan and profile. My thinking is to create a block and snap it to the crossing in plan view, drape it on EG and lower it by the assumed depth and then project the block to the profile view. I have this working. Now I need to label the plan view XING's with station and utility type and label the profile XING's with station, elevation and utility type. I could easily do this with station and profile labels, but as the desgin evolves, the alignment is subject to change and the crossings will need to be moved and updated. It would be nice to have the labels and symbols integrated into a single entity that updates when moved to the new location. Is there a way to do this with styles?
View 9 Replies
View Related
