I have been drawing in 2d and my floor plan is in the middle and I am using construction rays to create my elevations but I cant find or know how to use a tool that will recall my rotated and zoomed views (elevations) with a use of a AutoCAD 2013 tool.
View 1 RepliesI just completed my first topo using Civil3D 2013 (yay!) and now I want to send it to a client. However, when I save it as an ACAD 2007 file and go to open it using ACAD 2007 the spot elevations and all text and symbols associated with them disappear. I can't imagine that you have to have Civil3D to view a Civil3D file. Is there something I can do here?
I did not create a survey database with these points, just imported the .txt file from the field.
The problem: when I rotate a guide in Illustrator CC and then want to move that guide while zoomed way in (+300%) I am unable to select the guide. Annoying? Most definitely.
View 2 Replies View Relatedwhile in a layout tab in paperspace, if I zoom in and try to plot a windowed area, the feature layer information does not print but all vector information does. If I zoom extents and replot using the same previous settings with the small windowed area, all layers plot like they are supposed to. Now another scenario is as follows:
View 2 Replies View RelatedI've got a Nikon D70...with Photoshop 8 on a G4 Mac running 10.4.6
My jpeg thumbnails all look correctly rotated.However,when i open them uprights are often needed to be rotated 90 degrees anti clockwise...
After i rotate them and save...when i re open them they are STILL at the original (wrong)rotation...
Using Gimp 2.8 and able to rotate brushes, how would I save the rotated brush?
View 1 Replies View RelatedUsing 2014AutoCAD. Sometimes when zooming in using the mouse wheel by 1 click it the view will go from being zoomed out to zooming past the object in my drawing. this is happening in different drawings.
View 6 Replies View RelatedAcad 2013 on a capable Windows 7 machine.
I would like to cut a section through an extrusion. Attached find a section view of my extrusion cut at 90%%d. My deal is I want to be able to specify the angle. It could be anything, and it could be a compound miter (using in saw-speak, because my drawings go to saw operators), that is, angles in two directions. But, let's keep it simple - how to cut a section parallel with the Y axis in the attached drawing?
Right now I am warping something in due to the complexity of the profile. But for accuracy sake it is obvious why I'd like something better. I'd like my operators to have confidence in what they see.
I could do this easily in Inventor. Or even oin Civil 3D, working around it (using Autodesk-speak). But, I have neither. Is this a UCS thing? I trained myself to never touch the UCS long ago, because I am a surveyor by trade, and surveyors pull coordinates from AutoCAD (or one of its children) to stake points on the ground with, and a surveyor ends up working at McD's if she/he goes outside with coords pulled from a made-up UCS. So I don't know the first thing about manipulating the UCS, despite daily use of the products since release 12.
I looked at Sections in the 3D modeling workspace palettes, but nothing really jumped out at me for being able to rotate or cut sections where I want them to be. They all seem to snap to existing planes of the extruded solid. Big deal - I can do that intuitively just by looking at the part.
I am working with 2013 in 2D
Somehow I switched my UCS without noticing from X,Y,X to Z,Y,X. Though the UCS was changed my layout never switched orientation (flat square remained flat square and did not turn into a line).
I was alerted to the error when inserting the blocks. Half of the blocks were showing up as thin lines (in the Z plane) and half where showing up in the X plane.
I was able to correct the UCS by typing UCS, world view, then PLAN, current.
My question now: How can I fix the blocks that where "created" in the Z plane so that they can be inserted into the X plane without having to 'rotate3d' every time I insert a block?
I have a base plan with some light fixtures that need to be rotated 180.
Yesterday, I rotated the fixtures then saved the file. Then I closed the file and emailed it. When I reopened it, the fixtures were rotated back, but the file I emailed was properly rotated. I saved over our file with the one that I emailed, and all seemed fine yesterday. This morning I open it and everything’s rotated incorrectly again.
I've had a rather odd request come in for Volume calculations and I'm not sure how to go about it.
I have 2 surfaces: 1-Design 2-Excavation to Date
Now, the engineers would like to use a dozer to push this material down the hill but they want to do it incrementally by elevation. They would like to know how much material there is to excavate above elevation 90, then between elevation 80-90, then 70-80, etc all the way to 30-40.
I attached a sketch... what is the best way to do this?
AUTOCAD Civil 3D 2013
Windows 7
Processor: Intel (R) Xeon (R) CPU W3565 @ 3.20GHz
Installed Memory (RAM): 12.0GB
System Type: 64-bit
I admit that I have used AutoCAD for several years now, but I have very, very little experience with 3D applications and needing to alter the typical horizontal/vertical coordinate system.
What I have is a file that, though the lower-left icon is horiz/vert, my crosshairs cursor is tilted approximately 30 degrees counterclockwise. This file, I believe, did originate in AutoCAD Civil 3D, so who knows what was done there. But, how can I get my crosshairs straightened out once more?
I have noticed a relation with the UCS and the cursor, when I've played with Orbits. I just can't grasp what that relationship is.
By rotating points elevations change too!? I wonder what I am doing wrong!?
Just starting using Civil 3D 2012 version.
I have recently started working with civil3d 2012 & 2013 so go easy one me...
How can i check the elevations of 2 alignments that cross (junction)?
The localization team in Israel has added a utility that marks the junction on the profile view with a red flag and 2 marker lines, one for the existing ground and one for the elevation of the crossing alignments. The flag is not a civil3d entity, it's not dynamic and needs to be reset after each change.
Any better way of checking the elevations? (including adding a block or anything to the profile to show the other alignment name and elevation).
Is it possible to make a selection with the Patch tool and then rotate the selection to better match the destination area?
View 8 Replies View RelatedLisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies View RelatedI am looking for some way to store variables. For example in loop I want to
Enter a number
1
Enter hatch pattern
Ansi31
Enter a number
3
Enter hatch pattern
Ansi32
Enter a number
1
Enter hatch pattern <Ansi31>
Enter
Enter a number.... etc.
I'm trying to rotate an image. Actually, I figured out how to rotate it. But I can't figure out how to fill in the "empty" triangular areas that represent the area between the edges of the original image and the horizontal and vertical edges of the canvas. I would like to fill these spaces so it is not obvious that the image was rotated. How can I do this?
What is the standard way to manipulate images in this manner?
I've attached a sample image that I rotated.
Is there a way to recall a editable poly set and or a uvw map? It seems like I have to always re select them if if i want to modify a map.
Here is what I dont get, I have a box converted to an editable poly. With all of the polygons (faces) selected on one side, I assign a uvw map and successfully assign a map.
So I proceed to the top of the box and repeat the process and what? The entire cube takes on my "assign material to select" and I only have the top faces selected. What the heck is going on here. This is happening in 2013 and also 2012.
In ACA 2009 I could, after saving the drawing, click on a wall, window etc and drag it to the tool palette to create a new tool.
In ACA 2011 this only works for lines/polylines. Plus the wall, door and window palettes are gone. How can I retreave them?
The adjustments and effects dialogs always open right in the middle of the Paint.Net screen - in other words, right over the center of your paint object (photo, etc.). It is the last place anyone should want it to appear. I always have to drag it out of the way before I can use the effect (otherwise, you can't see what the effect is doing).
Example A: Make all such dialogs open at the right-most side of the Paint window by default (or left, etc.).
Example B: Have Paint.net remember the last position of any dialog box - and apply it for ALL effects/adjustments dialogs that open subsequent to that. This is my favorite option even if Paint.net won't keep the position after it closes. Moving the first dialog box of a new session once is no big deal as long as Paint.net will remember it per session.
Just upgraded a user to Autodesk Building Design Suite Premium 2013 but AutoCad 2013 and AutoCad MEP 2013 are not saving settings.
On first use the crosshair is large and angled, not standard. If I run "Rest values to default" then the settings are standard until I either restart AutoCAD or open a drawing then have the same strange cross hair.
Have tried creating a new profile, setting it as default startup profile by altering the shortcut but no matter what settings are not saved and revert to strange cross hair once AutoCAD is re-opened or a drawing is opening.If logon to computer as a user without a roaming profile all works fine.
I'm trying to save blocks to a new tool palette and it won't let me.
I'm doing everything I've always done. Right click on the tool palette, click "new palette" then change the name.
the new tab appears on the tool palette. I go then to drag the block from my drawing to the newly made palette.
As I drag over the tool palette with block, the black line appears on the palette as it should, but when I drop it to the palette its not there. I can drag and drop that same block to any of the other tabs on the tool palette whether it's a default one or one that I've made previously. I've done this process a thousand times, it always worked without a problem. All of a sudden it doesn't. I havent made any changes to my pc or os except for the microsoft updates.
I've also tried to load the blocks from design center to the new palette, no success!
I've checked to make sure tool palettes are saving to the right file....
C:Documents and Settingsuser nameApplication DataAutodeskAutoCAD 2011R18.1enusupportTool PalettePalettes
and they are not read only!
I'm running Windows XP Pro, never had any issues until now.
Is there an patch or update to fix this
Is there something I'm missing
It's very frustrating, when you can't work on a project the way your used to
In my workspace I have loaded pull down menu's, and I have saved my workspace in workspace settings.
But every time I close AutCAD and re-open it again, the pull down menu's disappear!! Is there a setting.
I'm using autoCad 2013 for Mac on OS lion (Educational Version). Often when i'm working for longer periods, when I try to save my work, it will suddenly go to my desktop, and the program wont respond. My work then is lost, and I have to open the recovered file, or work from the Auto saved file, and sometimes they didn't save aswell.
My files are saved on a shared dropbox folder, with some external references. On relative paths, i've unatteched them and it still crashes. I've tried the _audit command, and that didn't work either. I've been searching with appload for the MdiTab17.arx entry and try to unload it, but I can't find that file (maybe it's a windows solution).
This issue has been an irritant for a few days and today is almost constant. When I do a quicksave the program hangs up and I get a Program Not Responding message. The panels all go white and the desktop is ghosted like there is a film across the screen and I have to wait 2-3 or more minutes for things to resolve.
View 9 Replies View RelatedI had autocad 2013 but it was infected with a virus so i was obliged to install 2012 version. problem is that all my files are saved as 2013 and would not open in 2012. How to save all files at once to older version?
View 8 Replies View RelatedI am working in AutoCAD Civil 3D as AutoCAD 2013. I have a drawing that has three images loaded in the drawing. 1 is a .jpg and 2 are .bmp's. When i click the save icon, type save, type save as, type qs i get the attached pop up. It says it wants to delete one of the .bmp images.
View 3 Replies View RelatedSaving a file that will not let you save in the form it is in because of a "fatal error" Recovered files do not work either.
View 4 Replies View RelatedThe SDF shown below Zoomed In is displayed properly.
The SDF file Zoomed Out one level is missing a portion of the yellow line.
When I zoom out one level, a portion of the SDF does not display. This same portion will not print to DWF either.
If it were a SHP file I would delete the *.IDX file. I tried REGENALL and REFRESHING the SDF file.
I was using "Real time zoom" tool, when my arm slipped on somewhere on the keyboard and something weird happened. All my work which was drawed (plans, elevations, maps...) turned into a "dot" which is impossible to zoom in or do anything with it (I can move it though) and see the objects.
View 9 Replies View Related