I am working in AutoCAD Civil 3D as AutoCAD 2013. I have a drawing that has three images loaded in the drawing. 1 is a .jpg and 2 are .bmp's. When i click the save icon, type save, type save as, type qs i get the attached pop up. It says it wants to delete one of the .bmp images.
View 3 RepliesI am working in AutoCAD Civil 3D as AutoCAD 2013. I have a drawing that has three images loaded in the drawing. 1 is a .jpg and 2 are .bmp's. When i click the save icon, type save, type saveas, type qs i get the attached pop up. It says it wants to delete one of the .bmp images.
View 8 Replies View RelatedI have my current install set to save the dwg down to 2010. how come the preview images are blank? its only when i save down do the images become blank. if i save in the current version the preview image is there.
View 5 Replies View RelatedAs a recent user of Photoshop, I need to attach details such as keywords to an image. This will usually be a TIFF or JPEG.. I'm new to Gimp but see in the Properties category I can enter the sort of info I want but when I try to save everything this info just disappears and obviously is not embedded in the file.
View 2 Replies View RelatedI am using Photoshop CS6 and I want to create a composite of 2 images. One is of the Moon and the other will be of stars. The problem I'm having is removing the unwanted stars from the Moon and the dark part of the Moon (depending on the Phase). Do I create a layer for each image? And is it black over white or vice-versa?
View 7 Replies View RelatedI have an old image where i didn't used layers much.
I have one detail which is not layer and I can't erase it so that only background stays.
Just upgraded a user to Autodesk Building Design Suite Premium 2013 but AutoCad 2013 and AutoCad MEP 2013 are not saving settings.
On first use the crosshair is large and angled, not standard. If I run "Rest values to default" then the settings are standard until I either restart AutoCAD or open a drawing then have the same strange cross hair.
Have tried creating a new profile, setting it as default startup profile by altering the shortcut but no matter what settings are not saved and revert to strange cross hair once AutoCAD is re-opened or a drawing is opening.If logon to computer as a user without a roaming profile all works fine.
In my workspace I have loaded pull down menu's, and I have saved my workspace in workspace settings.
But every time I close AutCAD and re-open it again, the pull down menu's disappear!! Is there a setting.
I'm using autoCad 2013 for Mac on OS lion (Educational Version). Often when i'm working for longer periods, when I try to save my work, it will suddenly go to my desktop, and the program wont respond. My work then is lost, and I have to open the recovered file, or work from the Auto saved file, and sometimes they didn't save aswell.
My files are saved on a shared dropbox folder, with some external references. On relative paths, i've unatteched them and it still crashes. I've tried the _audit command, and that didn't work either. I've been searching with appload for the MdiTab17.arx entry and try to unload it, but I can't find that file (maybe it's a windows solution).
This issue has been an irritant for a few days and today is almost constant. When I do a quicksave the program hangs up and I get a Program Not Responding message. The panels all go white and the desktop is ghosted like there is a film across the screen and I have to wait 2-3 or more minutes for things to resolve.
View 9 Replies View RelatedI had autocad 2013 but it was infected with a virus so i was obliged to install 2012 version. problem is that all my files are saved as 2013 and would not open in 2012. How to save all files at once to older version?
View 8 Replies View RelatedSaving a file that will not let you save in the form it is in because of a "fatal error" Recovered files do not work either.
View 4 Replies View RelatedI find autocad2013 very very slow saving, especialley with larger files. The same files save a lot faster in 2012.
View 9 Replies View RelatedI have problems with saving my drawing using the save option. I click save but when i close the drawing and reopen it i realise it didnt save at all. I actually have to 'save as' to get it saved.
View 4 Replies View RelatedOn some 3D models, when I save the drawing, it automatically switches to perspective view and turns the sky background on. This is irritating.
I found this old thread in the AutoCAD Architecture area from 2010
[URL]....
Even setting the sky background to 1, then 0 doesn't work. When I save, it reverts to a perspective view and turns the sun/sky back on.
AutoCAD MEP 2010 64 bit
Revit Architecture 2010
Windows 7
Whenever I save a drawing, it goes to a temp file. I have to do a 'save as' to bring the dwg back to the original folder. Our in-office guru thought it had something to do with the new AutoCAD 360, but I have never even signed in to that, and when we did open it, nothing was in it.
View 3 Replies View RelatedI changed the configuration in Tools/Options/Open and Save/File Save, to save as Autocad2004/LT2004 Drawing (*.dwg). But sometimes automatically the program saves as Autocad2013. It is critical for me because I work with people that still use Autocad2004.
View 6 Replies View RelatedSo we have an HP T1100 plotter and we want all the .pc3 files on the server. I go to the plotter in my devices and printers from the start menu and I add in all my custom paper sizes. Then I create a .pc3 file that points to a system printer on my machine for that plotter. I then move the .pc3 file to the server. Next thing I do is go to .pc3 file on the server and filter out all the unneeded papers sizes (arch, jis, iso, etc.) so all that shows up in the plot dialog box are the custom sizes I created. I then re-path autocad to the server in my options. All is fine so far, everything plots fine.
Now I go to another machine and point autocad to use the folders on the server for the plotters. I go to plot and the .pc3 files are there but when I pick the paper size drop down selection, all the arch, jis, iso sheets, etc... that I filtered out are now there. Well, I can go into the .pc3 file on his machine, re-filter out all those unneeded paper sizes and all is well, but then I come over to my machine and all the unneeded paper sizes are there again. It goes back and forth. I save on one machine and then the other one is messed up.
I cannot get the unfiltered papersizes to stay that way on the .pc3 file thats on the server. Why is this? I know I have the .pc3 file pointed to a system printer on my machine but we have the same printer on each machine with the same drivers. We could just put the plotter on the server so there is no system printer but that is not an option right now.
AutoCAD 2013, 60-90 days into it, upgraded from 2007.
I have 2 of 4 workstations with this issue, AutoCAD will automtically save the file when the files is closed, w/o any prompts to verify of we want to saved or not.
I have my Options|Autosave turned off, but this should not affect the save on close it should only create a continual ac$ backup file.
This is now the 2nd time this has occured. In early March we noticed this and in dealing with AutoCAD (Suscription Service) we finally deceided to restore AutoCAD to factory defaults, which did fix the issue at the time. However it also meant that I needed to retore all the pathways and our standards. Once completed, I paid particular attention to ensuring that AutoCAD was NOT saving the file on close and it was doing so up until earlier this week, when I noticed it SAVING on close again.
Now most of you might think, hey thats a good thing, however, we routinely will test modifications to our layouts on our working files, but dont want to actually modify those files and then we would simply close the drawing w/o saving thus ensuring that those mods were not saved.
In March, both 2007 & 2013 did this, however only my 2013 is affected now.
I installed IV13 onto four of our workstations including the update 1.
Due to the size and complexity of our project we are using Vault to manage all of our parts and drawings.
We had issues with 2012 but managed to get around them. I was hoping 2013 would solve some of them but we are experiencing extremely slow performance with 2013. It takes at least 15 to 20 minutes to open and update drawings. Swopping between an assembly and IDW to do updates takes another 20 minutes to refresh and update.
This is happening on all four of the workstations.
I have come across a few forums with this same issue and I have tried setting up the options as described in them but have had no difference in performance.
HP Elitebook 8760W
Intel(R) Core(TM) i7-2600QM CPU @ 2HGZ
8GB Ram
Nvidia Quaadro 3000M
Something has happened and I can no longer use the DEL key to erase objects. In fact, to erase anything I have to first click the erase button then select the objects to erase.
Is there a command to correct this issue?
Dell T1600 Workstation
Windows 7 x64
Intel Xeon E31280 @ 3.50 GHz
24 GB RAM
Nvidia Quadro 4000
Civil3D 2013
I have a title sheet which I want to prevent being erased if certain conditions are met.
My code is:-
Friend Sub ObjectErased(ByVal sender As Object, ByVal e As Autodesk.AutoCAD.DatabaseServices.ObjectErasedEventArgs) Select Case e.DBObject.Id.ObjectClass.Name Case "AcDbBlockReference" Using tr As Transaction = AcadDoc.TransactionManager.StartTransaction() Dim blk As
[Code].......
Before when I selected objects and press "delete" button on the keyboard, it erased those objects.
Now CAD doesn't do that. How can I enable that again?
I am installing AutoCAD for the first time in a lab at a high school. We have roaming profiles for each user. When I launch AutoCAD for the first time as a user, the program goes through it's first time configuration, check the "Privacy Statement" and uncheck the "Show at Start up" on the welcome box. After I log off and log back in and launch the program again, it goes through the setup again and I don't have the setting I had changed on the previous launching of the program. I think it has something to do with the roaming profiles because when I login as myself (I don't have roaming profiles) it works fine.
View 2 Replies View Relatedunder options - I have the Automatic save unchecked
the program keeps saving after I do something in sheet set manager...like rename a sheet view
2013 Civil 3D
I have been drawing in 2d and my floor plan is in the middle and I am using construction rays to create my elevations but I cant find or know how to use a tool that will recall my rotated and zoomed views (elevations) with a use of a AutoCAD 2013 tool.
View 1 Replies View RelatedI just completed my first topo using Civil3D 2013 (yay!) and now I want to send it to a client. However, when I save it as an ACAD 2007 file and go to open it using ACAD 2007 the spot elevations and all text and symbols associated with them disappear. I can't imagine that you have to have Civil3D to view a Civil3D file. Is there something I can do here?
I did not create a survey database with these points, just imported the .txt file from the field.
When I am working on several drawngs at the same time, I use the Publish command to plot them as a group. However to save the settings as a DSD file for future use, every open file needs to be saved. Why is this? Is there a way to disable that requirement?
There is no reason I can think of besides "by design" for this. The DSD file is only a list of drawings and their plot settings and is not dpendent in any way I can think of, to whether or not one its drawings is open and not saved.
I am trying to find a faster way to save my images. I shoot in raw, save raw images as jpegs after editing them in Camera Raw. I am using Photoshop CS6 on a Mac version 10.7.5. When I save, I either have to save as a copy of the exisiting image, or replace the image I'm working on. Other forums I've read said to make an action to save and create a function key to make this process faster, but my function keys aren't working, and playing the action I've created still makes a copy of the image.
View 3 Replies View RelatedAutoCad sticking on commands like copy selection and move tool, It is running very slow and when saving it says there is no system memory, although my Computer has pleanty of memory (the local disk has over 200GB space)
PC has correct specification for AutoCad 13, and I have never had problems until this morning-
I get an image from the camera object using apprentice and putting it into a Picturebox. But when I try and save the image using the standard Picturebox.image.save method I get an error.
Private Sub Button3_Click(sender As System.Object, e As System.EventArgs) Handles Button3.Click
Dim oApprentice As New Inventor.ApprenticeServerComponent
Dim Doc As Inventor.ApprenticeServerDocument
Doc = oApprentice.Open(oApp.ActiveDocument.FullFileName) 'oApp is defined elsewhere.
' Create a client view for the document, passing in the hWnd for a picture box.
Dim clientView As Inventor.ClientView = Doc.ClientViews.Add(PictureBox1.Handle)
[code]....