The SDF shown below Zoomed In is displayed properly.
The SDF file Zoomed Out one level is missing a portion of the yellow line.
When I zoom out one level, a portion of the SDF does not display. This same portion will not print to DWF either.
If it were a SHP file I would delete the *.IDX file. I tried REGENALL and REFRESHING the SDF file.Â
I was using "Real time zoom" tool, when my arm slipped on somewhere on the keyboard and something weird happened. All my work which was drawed (plans, elevations, maps...) turned into a "dot" which is impossible to zoom in or do anything with it (I can move it though) and see the objects.
View 9 Replies View RelatedIn paper space I've zoomed in (whilst outside the viewport) double clicked inside the viewport and now I can't zoom back out again to see the viewport or border! Typing 'ps' doesn't work. (mac)
View 7 Replies View RelatedI have a drawing that contains an ecw image inserted through FDO. The image appears in the correct location when plotted at a smaller scale 1"=100', but when printing a larger area at say 1"=2000' the image is not in the correct location. It appears to be shifted when compared to linework that is present in the drawing. The shift is about 100'.
View 2 Replies View RelatedI recently upgraded to the 2011 version. I noticed that when I am zoomed in on a dashed line to the point where only one dash is visible on the screen, if I select the dash using the blue (window) selection box, it will select the dashed line, even though the entire line is not within the blue rectangle. This was not the case in earlier versions of AutoCAD, and I was hoping that there is a way to disable it.
In other words, if I'm zoomed in on a portion of the line, I only want to be able to select it by either clicking on the line itself or by dragging the green (crossed) selection box over it. I do not want the line to be selected when I drag the blue (window) selection box over the line.
Also note that this happens with hatches as well. For example if you zoom in on a concrete hatch so that only one triangle out of the hatch pattern is visible on the screen. By dragging the blue selection box over the triangle, it will select the hatch. Again, in this case, the hatch should not be selected because it is not entirely enclosed by the blue rectangle, only a portion of it is.
somehow i got zoomed way out in paperspace and can't find my objects, how do i get back to centered over those?
View 9 Replies View Relatedwhy my lines are thick when I zoom in on screen yet they become "normal when zoomed out" seams to me that lineweighs are being displayed on screen, a variable setting perhaps?
View 3 Replies View RelatedI'm building a platform and have sheet metal on top of a tube frame. When I'm zoomed up closely I only see the sheet metal surface. But when I zoom out further some of the tubes start becoming visible through the sheet metal. This happens in just about every assembly. Parts behind other parts start becoming visible when zooming out far enough.
Is there a way to stop this from happening?
A problem i have encountered with LT 2011 is the extend or trim command freezing/taking a long time to extend or trim.
If i zoom up close, extend/trim works as normal instantly, but if i zoom out further & try the same extend/Trim it can take 30 seconds or more.
I dont remember having this issue on previous LT versions, I've found this with many if not all drawings
while in a layout tab in paperspace, if I zoom in and try to plot a windowed area, the feature layer information does not print but all vector information does. If I zoom extents and replot using the same previous settings with the small windowed area, all layers plot like they are supposed to. Now another scenario is as follows:
View 2 Replies View RelatedI am using Acad 2008. When zoomed very close, I can not select/highlight an object such as a line by clicking on its apparent location, instead, I have to try clicking somewhere around it so to select it. The showing line seems an shadow of the real line which is "hiding" somewhere. This usually happens after I played with a drawing (open/close/changing viewing directions etc) for a long time and the drawing seems "degenerated" somewhat. The only way I can correct this is to select all objects in the drawing and copy/paste to a brand new drawing started with a blank template. I guess a system variable governs this effect, but I do not know which one.
View 4 Replies View RelatedUsing 2014AutoCAD. Sometimes when zooming in using the mouse wheel by 1 click it the view will go from being zoomed out to zooming past the object in my drawing. this is happening in different drawings.Â
View 6 Replies View RelatedI have 5 drawings that all have the same model (basically a topo map of a 2 mile radius) but each have unique info, i.e. monitoring well locations, utility info, etc. The client wants a zoomed in view of a 1 block radius and I need all 5 drawings to have an identical zoom. How do I adjust my viewports in each drawing so they are zoomed in to the exact same place?
I'm using AutoCAD 2007 for this.
I have been drawing in 2d and my floor plan is in the middle and I am using construction rays to create my elevations but I cant find or know how to use a tool that will recall my rotated and zoomed views (elevations) with a use of a AutoCAD 2013 tool.
View 1 Replies View RelatedI have a simple frame made of a 1/2 rod and have inserted a textured appearance of expanded metal. It is a guard.
I am not sure if the way i inserted the texture is correct, but it currently is scaled down to small. Have to scroll in lots to actually see the expanded metal.
Is there a better way to apply the texture than creating a surface? How can I adjust the scale of the texture?
Maybe applying a texture is not the best way to show that this guard is to have a section of expanded metal that will fit inside the 16x24 in guard? a note is not ideal in the drawing, but I suppose it is better than making an actual model of the expanded metal.
Part is attached below. Inventor 2013 Pro.
when working with a 3d model i want to switch between front, top, side views to change my XYZ axis. when i hit the view icon(whichever i am going to) it regenerates and zooms extents. is there w way to stay zoomed into the current location but toggle the crosshair XYZ plane?
View 1 Replies View RelatedThis is something I found frustrating while using CS4 and never got around to finding out if there was a way around it. Now that I am using CS6 I took a look around the preferences and did not see anything that will allow me to pan around an image while I am viewing the whole image. This becomes rather frustrating when I am working on the edge of a photo and using a brush tool as the way PS is set up pretty much forces me to work right next to my tool bars and more than once I have accidentally clicked on another tool rather than starting my brush stroke off the edge of my work like I want to.
View 7 Replies View RelatedI have a few pictures that have some small objects in them,I was thinking..Is there anyway to zoom in the object in the image and save it that way?Or cut the object out of the image,create a new one and zoom that one in?
View 1 Replies View RelatedI've actually been through this on every edition of PS I've used, and now being on CS4, I figure it's time I asked about it finally, lol. Why is it that when I am zoomed in on an image, say 600% magnification or more, my selected tool becomes the guideline creation/drag icon? If I zoom out enough, it changes back to the tool I'm using (i.e. select tool, pen tool, etc.), but whenever I zoom in too much, it will automatically switches to the guideline tool, not allowing me to do anything else. I taught myself PS, and for the most part, I've figured out any problems I've had by searching forums, google, etc., but this has always stumped me. Is there something I need to change in my settings? Or a hotkey I can use to continue using my selected tool while zoomed in?
View 5 Replies View RelatedI have regarding showing pixels on an image? I want to do a series of images that are sharp in the centre and display no pixels (ie a 'normal' sharp photographic image) but that gets more and more 'pixilated' towards the edges so the the size of the pixels increases towards the edge until they are very obviuosly pixelated. I've tried using the mosaic sub filter but that leaves all the visible pixel 'blocks' the same size and I want them to get bigger towards the edges.
View 6 Replies View Related I upgraded to the latest and greatest version 2.8. I like most everything about 2.8.x. Generally, I have found the adjustments/transition to the new feature and controls to be a rather easy. However, I am having an issue with panning, while editing. It doesn't matter if I am at 100%, or while zoomed in, or zoomed-out, panning is a problem.
All the way up-to and through versions 2.6.x, while working details, zoomed-in to 800% or so, when I would PAN the image (hold down the Space-bar, hold down the left-mouse, drag the mouse, or while using the vertical and horizontal scroll bars) it was always a smooth image drag/movement. Since the introduction of 2.8.x Panning has become a nightmare. It's extremely choppy with, broken up, and it freezes up for short periods of time, basically it's anything but smooth. The panning feature is a huge step backwards from what I have become accustom to. The problem is I am zoomed-in on whatever it is I am working on at least 95% of the time (cutting, painting, etc.).
Perhaps I am just a creature of habit but I like working at the pixel level. I'd like to get panning working the way it has always worked.
I have a problem with color banding in Photoshop CS6 while zoomed out, even though I am working in 16 bit. Here is a crop of the same area of a .psd while open in Photoshop CS6 (left) and in Illustrator CS5 (right).
Â
The banding is quite apparent in PS while not present in Illustrator. At 100% zoom there is little banding in PS, and converting to 8 bit makes it look markedly worse. However at 25% zoom (which these crops were taken at) converting to 8 bit makes no visible difference, making me think that Photoshop's zoom is working at 8 bit for some reason.
Â
Since the image looks fine in Illustrator I'm pretty sure it's not a problem with my display, or graphics card/driver. I've tried changing the color profile (currently set to Adobe RGB) in Photoshop without effect. I've also tried changing the 'Graphics Processor' level in Photoshop, including disabling it entirely, as well as reducing the cache level to '1' without effect either. I'm not quite sure why Illustrator is able to handle the image so nicely at all zoom levels while Photoshop introduces all this banding.
I remember using a shortcut to navigate around while zoomed in. It works this way: while zoomed in a document i press a shortcut key, PS zooms out and gives me the overview of the document, then while keeping the shortcut pressed i hover the area where i want to go next and release the shortcut keys, then PS zoomes the area i selected.
View 2 Replies View RelatedI have PSP Pro X6 64bits french with the lastest service pack installed. I tried this:
Zoom in a picture that's bigger than the screenInsert a vector object (ellipse for example)Switch to the "move" tool and try to move the shape to the top of the picture. I went too far towards the top and I went beyond it. As I lost it, and after having zoomed out, I went back one step in the "Undo" list to retrieve itThat's where weird reaction are beginning: the refresh system is somewhat lost: I have to zoom out/in with the mouse to force a refresh. Sometimes, I move the object and it seems to jump back
when you are zoomed out and you see the grey area around your canvas so that you can start gradients out in that area. Well, when you are zoomed in you can't extend into that area.
View 8 Replies View Relatedwhy is the small text blurry on Photoshop? i am a very small advert for a newspaper! and the text is printing blurry and when zoomed in is appearing all blurry? how do i stop this i only have Photoshop and indesign.
View 27 Replies View RelatedOne thing that has always puzzled me is why i can't move the canvas while zoomed in so it's possible to see the gray area outside the actual image.
As far as I remember Painter has always been able to do this and I'm astonished this is not possible even in CS2.
Or is it?
Is there a way to do a pixel-exact (rectangular) selection when zoomed out?
e.g. I have an image that is 3000x2000, I have zoomed out to see the whole image and like to select a section that is 1280x1024 out of that image. When I use the mouse, I can't select it exactly (expected behavior as one pixel in my view is 2.3 pixel in reality) but even when I use the mouse combined with the arrow keys I get the same behavior (which I did not expect, I would have thought I could change the selection's size pixel by pixel).
Currently I'm solving the problem through selecting the next bigger size (e.g. 1283x1025), copy/paste it into a new image, then crop it to 1280x1024 and copy/paste it again to a new image where I save it. Is there a more efficient way of doing it?
The problem: when I rotate a guide in Illustrator CCÂ and then want to move that guide while zoomed way in (+300%) I am unable to select the guide. Annoying? Most definitely.
View 2 Replies View RelatedI feel that my photos usually look very muddy around the edges/details when zoomed in in Lightroom.I am attaching an example that I shot RAW using Canon 5D Mark II with the 24-70mm lens. Is it something I'm doing wrong either when shooting or with post processing.
View 13 Replies View Related1-week-old MacBook Pro - Non-Retina - OSX 10.8.2 / 2.6GHz Intel Core i7 / 8GB RAM / 750GB HD (currently 522GB free space)
Â
I initially discovered my issue in Photoshop CS6, but just installed the trial of LR 4.2, as well as 4.3RC, to see if the problem persisted, and it does. My problem is choppy/zig-zagging movement when moving around (two-fingered scrolling using my trackpad) on a zoomed-in image. Here's a video capture of the problem in Photoshop - and it does the exact same thing in LR. Solution is to use a mouse instead of a trackpad...so useful. [URL]...The image in this video is just a jpg, quite small in file size.
Â
I have adjusted every single scrolling/trackpad option in System Preferences, tried enabling and disabling automatic graphics switching in Energy Saver Preferences, changed all Performance Preferences in PS. I've also installed all Apple and Adobe updates.Â
(Here's my other post, with more detailed information - [URL]...)