I have 5 drawings that all have the same model (basically a topo map of a 2 mile radius) but each have unique info, i.e. monitoring well locations, utility info, etc. The client wants a zoomed in view of a 1 block radius and I need all 5 drawings to have an identical zoom. How do I adjust my viewports in each drawing so they are zoomed in to the exact same place?
I'm using AutoCAD 2007 for this.
I have a viewport in a layout that shows a part of my model. I'm gonna create a number of layouts exactly like the first one, only having the viewports move their display a number of units along the x-axis. Is there a way to make this offset along the x-axis exact, or is the only way to enter each viewport and "manually" adjust the position?
View 5 Replies View RelatedIs there a way to do a pixel-exact (rectangular) selection when zoomed out?
e.g. I have an image that is 3000x2000, I have zoomed out to see the whole image and like to select a section that is 1280x1024 out of that image. When I use the mouse, I can't select it exactly (expected behavior as one pixel in my view is 2.3 pixel in reality) but even when I use the mouse combined with the arrow keys I get the same behavior (which I did not expect, I would have thought I could change the selection's size pixel by pixel).
Currently I'm solving the problem through selecting the next bigger size (e.g. 1283x1025), copy/paste it into a new image, then crop it to 1280x1024 and copy/paste it again to a new image where I save it. Is there a more efficient way of doing it?
Using acad2011 I would like to place a border (rectangle) in paper space so it measures 2cm form all sides of the paper when i print it.
View 6 Replies View RelatedI am unable to adjust my Viewport sizes in anyway, (wont allow me to grab handles to adjust size & or move entire view port) after they are changed to the defposits layer, I cant change them back to any other layer because when I try to highlight them, it says "0 objects found". Wont even let me delete them, I don't think they are locked, as I am the creator of this drawing and have done no such thing.
View 6 Replies View Relatedwhat I can do, to maintain project world coordinates at exact place when moving UCS and PLAN.
For ex.I have this project, In witch I'm making house plan on one of those plot, to draw in comfortable position I want to rotate view with UCS.
I type such command UCS/ OBJECT/ pick an object and ENTER, then PLAN/ CURENT and hit enter, now I have comfortable plan position to work with.
The problem of all this, is that when I redo all backwards, coordinates doesn’t correspond to previous places.
Getting a little confused on how to make various adjustments, like brightness, darkness, hue, etc. to only PORTIONS of sky. I want to be able to go back to the adjustments later to adjust further if necessary. What has happened so far is that when making adjustments to the sky it is affecting the subject
View 17 Replies View Related1. Is there an easy/precise way to place a guide in the exact center of an artboard?
2. I want to use the guide to create a balanced design for a poster by making sure that I place my focal image on the center of guide to ensure that half of it displays on either side of the guide. How important is it to strive for complete balance? Sometimes I see ads that seem to have balance while other times there might be tons of white space an some graphic element on one side or the other of the layout.
Using 2014AutoCAD. Sometimes when zooming in using the mouse wheel by 1 click it the view will go from being zoomed out to zooming past the object in my drawing. this is happening in different drawings.
View 6 Replies View RelatedIs there a command to lock all vieports within the drawing?
View 9 Replies View RelatedI have 3D drawing. I put camera's in several places and situations. In viewports I choosed a camera in every viewport. They work nice so long the drawing is open. When I close the drawing after saving it ofcourse. When I open it again , the viewports jump to SOUTH-EAST. and I have to rearrange the view of the cammera again. Although I used the command UCSFOLLOW to solve this, but it did not work.
PS. that happens only in the viewports which based on camera's. The views in other viewports which are not based on camer's, stay without chaning or jumping.
I have not done this for a while, but I remember you have to click somewhere otherwise all you see is an empty viewport in the new drawing.
View 2 Replies View RelatedI need to change colour to a drawing with several viewports and xrefs. I suggested to my co-worker that I could fix this via plot manager, but he insists that I change all colours in the xref to one and the same, so everyone can plot it black and white and so we don't have to set up new plot styles on every computer. (we've got the drawing file from another company btw).
I've had a look and it seems like I have to do refedit to be able to edit any parts of the xref. Most of the drawing has got the same colour already, but it just say "by layer"... how do I find out what colour it is?
way to draw a line down the exact center of an image, and possibly make the line look cool. I'm trying to create a custom Magic the Gathering playmat thing for a program for testing decks out.
I tried the line tool, but it doesn't seem to allow you to fill it in with the paintbucket after, or do anything with it for that matter. I just want a cool looking divider.
Then I might create another split into 3 sections vertically for 6v6 battles, any way to measure this out automatically?
I am using autocad 2011..I have a problem with printing to scale.I have completed a drawing in model space with a 1:1 ratio, all my units are in mm.I have created 3 different view ports in paper space to show different aspects of my drawing, each view port has a different scale.
The whole drawing is to be printed on A2 size paper.
My main viewport (which contains the primary aspect of my drawing) is to be drawn to scale. When I click on this view port Autocad states that has a scale of 0.008583 – what does this mean? See picture 1..When I print the document the scale is set to 1 inches = 25.4.
All I want to do is print my drawing so that it fits onto an A2 page, but the main view port is to be printed to a scale. I want to scale to be sensible some like 1 in 200 or 1 in 50 etc so that other people can use a ruler to work out the real life dimension.
When I insert an xref it's to scale 12!; in my model space I have blocks scaled 0.0833 and others to 1 scale! this is weird, every time I insert a block I need to scaled it in the way to adjust it to my drawing. If my drawing it's supposed to be 1 scale.
View 4 Replies View RelatedI set a viewport to a perspective mode. I do this by starting 3DOrbit then right clicking and choosing perspective. Save, close, open and all perspecitve views are set to parallel projection.
View 9 Replies View RelatedI need to select all the viewports in the drawing and to make some changes with them, I'm planning to select them all with ssget command. If I do that I will have one viewport for the paperspace itself in every layout. One of my question is, how to know which viewport is the paperspace itself?
Second question is, how to get the name of layout in which one is the viewport? It is important to me that the lisp is really fast, so I'm planning to do the most of stuffs with vla commands.
how to adjust the default settings of my drawing units. I have adjusted these so that if I create a new drawing they are set as I want them. But when I output a drawing from
I work with a land surveying package. I use both AutoCAD 2006 and R14. When I export a cad dwg from the survey software and open it in R14 my drawing units are as I want them E.G Direction Control = North = 270 and should be set to clockwise. If I open the same exported drawing but in 2006 the settings change. If I create a new drawing in 2006, the settings are as I want them.
I have just installed 2012 and have drawn a 3d model. In paperspace i have a couple of viewports , all nicely set out at 1:5 scale. then i click in another viewport and bam, all the other viewports change scale (zoom out) and orientation. is there some system variable that i have overlooked?
View 9 Replies View RelatedI have a lot of sheet DWGs with a single layout in each. The layouts have several viewports into model space.
Is there a way to export out the layout tab where the viewport contents have been converted and placed into the layout space?
Ideally, I'm hoping to basically convert the viewport heavy paperspace into a dumb model space layout.
Like the title says I am looking to place views (and dimensions) on drawings using ilogic. I am new to both inventor and ilogic, most of my training came in SolidWorks. It needs to pull the part from an ipart that pulls the information from an excel file.
View 1 Replies View RelatedI have a number of areas numbered 1,2,3......etc but I need to change the text to the following where only the last number that is underlined is to increase sequentially.
P23/L2/1
Could Tcount be used or is there a modified version available?
If not is there a quick way to automatically place a number block onto a drawing with a click and then for every other click sequentially increases the last number.
whether it is possible to take dimensions from a simple engineering drawing and place them in an Excel workbook, currently running CAD2000.
View 5 Replies View RelatedI am trying to place a black background on a drawing so once it is printed it will be easier to read. I place a solid hatch in a boundary and use the DRAWORDER command to place in underneath everything else, but when I plot the dwg to pdf the black hatch comes out grey in the pdf (see attached pdf)
Is there an alternative that I can use to add a black background to a dwg?
I was curious, when creating multi sheet drawings, how can I place different information in the title block on each drawing?
Example, 2 pages, Description on page 1 = PAGE 1 DESC, by default this same description will show up on all subsequent pages. How do I get page 2 description to be different?
Inventor 2014 PDS
I am relatively new to Revit. How I can place an Autocad drawing into Revit. Specifically I want to place a manufacturers AutoCad 3D drawing of an appliance (refridgerator) into my Revit floor plan.
View 2 Replies View RelatedI have a problem with the "in place" block editor, mainly because I fail to synthesise a sentence for the search that makes sense. My problem is that when I am in "edit block in place" mode I am still able to edit the drawing, so that I can still delete or stretch or move certain elements, even though they are not part of the block. This is quite annoying because it leads to unwanted changes and mistakes. Is there a variable or an option to change it and prevent any modification to anything outside of the block?
View 7 Replies View Relatedhow to place a rendered image into an Inventor 2011 Drawing?
View 1 Replies View RelatedHow to get postion of faces of part when place on idw drawing file???
Do we need to use (ThisApplication.MeasureTools.GetMinimumDistance(oTG.CreatePoint2d(0, 0), oFa.PointOnFace)?
If we use that we will get distance but how to get face postion on idw. do we need to use edges?? or lines?
I recently started working on Inventor 2013 and I'm trying to copy a drawing view in order to place it on another sheet. Unfortunatly I see no copy option. Am I doing sth wrong or it's due to the changes in the version?
View 7 Replies View Related