I am trying to place a black background on a drawing so once it is printed it will be easier to read. I place a solid hatch in a boundary and use the DRAWORDER command to place in underneath everything else, but when I plot the dwg to pdf the black hatch comes out grey in the pdf (see attached pdf)
Is there an alternative that I can use to add a black background to a dwg?
We do most of our drawing in 2D – quaint I know, but that’s the way the office works. On occasion we’ll do something as a solid model to guide a client understand a complex roof or a clearance problem. We started a model for a project we are working on and ended up using it as building elevations.
The problem is with plotting. If I use our standard office CTB (which is set to print as black), I get color printouts no matter what I try. I have tried using an STB and changing all our layer colors to “7” in an attempt to make it print black, but I'm getting extremely undesirable - seemingly random - line weight results.
The client wants the next project done in 3D as well and I’d like to be able to have the elevations look right.
Is there any way to print to a PDF and have the background remain black? I know how to make the colors stick for the objects but colors like yellow and cyan are hard to see on a white background.
View 4 Replies View RelatedI have this problem with my MText Background Mask. You can take a look at the two attachments. Each one gives me the same issue, but with different MText objects. I'm also plotting to a KIP5000 and a SHARP All in One, and I get similar results, except in some of the MText, they come out in a random color as well. The pc3's for all devices are set to Lines Merge.
The text is actually part of an xref file, and if I plot directly from the file they are in, I have no problem. I did a test where I copied the text into the sheet file, and got similar results when the text is in modelspace, and I got my intended results when the text is in paperspace. Now, this is the way I want to go...but the company standard is to draw it all in the xref, so I have to figure out how to get around this.
I've gone back and forth with the Merge/Overwrite options in the pc3, and when plotting to PDF and SHARP, I get the correct output with Overwrite, but the KIP just completely ignores the background mask with Overwrite.
I'm using autocad 2000 and I have a problem printing & plotting. The print, plot preview only shows a section of the drawing. What settings do I need to change for the entire drawing to print for the paper size I need.
View 3 Replies View RelatedUnfortunately I am using ACAD 2000 so bear with me and the only ACAD training I have is a 3 day crash course at the local software reseller.
I am attempting to plot a drawing that was created from a template into a .pdf but it is plotting colored lines instead of black lines.
Here is some background info. My template is set up as a .dwt which I will save as a .dwg when I begin to make my drawings. Plot style table is “monochrome.stb” and I have selected Adobe .pdf as my plotter configuration. I then select the “Properties” then go to “Custom Properties”, “Paper/Quality” tab and then select “Black & White” as my color.
When I go to plot the drawing as a pdf and do a preview of what I am about to plot, I see that the lines that make up the drawing are a shade of gray in color. All my lineweights in the layers property manager are set to default. I have attached a blank drawing that is based off of my template.
We have two Xerox 6204 Wide Format plotters, one in my office and one in another. When I plot the wipeouts (w/in blocks on layer 0, color 255 which is set to 0 screening) it plots as it should.
When the same file plotted with the same *.ctb file in the other office the Xerox plots same wipeouts come out completely black. (The LaserJet prints are not effected).
Is there a way to apply plot styles and line weights to a dwg file like 'dwf ePlot' does but keeping the results in .dwg format?
View 4 Replies View RelatedI seem to be having problems when I lasso round a specific part of a photo taken with a white background and then try to add that part of the image to a plain #000000 black background.
I always seem to get a white outline around the image when I place it on the black background, even when its on ZERO feathered. I don't like using feathered as it adds a smudge round the outside of the image.
I have a problem when I print documents regardless of the printer I use.
If the document is on the network, colors are printing in black.
But if I copy this document locally on my computer, colors are printing normally.
Note : I'm using AutoCAD 2012 LT
I'm using a HP DesignJet T1100 (non postscript). I have inserted a screen capture of a google map into a sheet as a area/aerial location map for the project. Unfortunately, the jpeg is plotting out as solid black. I have tried inserting it in different ways but same result when plotting. I understand the difference between PS and nonPS plotters/drivers but I was under the impression that there was a setting to plot images in nonPS plotter dialouge box. I did find various incarnations of my question but nothing that directly speaks to it.
View 1 Replies View Relatedhow to stop AutoCAD Lt from ploting in grey... it doesnt seem to make sense to me why this is happening. We use to have Autocad 2007 and a lot of the files that we still work from were created in that. Everytime files are now plotted to pdf parts of the drawing appear a very light grey as oppose to black which is how they appear on the screen. In the plot style table in the page setup they are also black - and I have tried changing it from monochrome to custom pen assignments, nothing seems to change it. The files are usually in stb as oppose to ctb. whole page prints black or the colours that I have actually clicked on?
View 2 Replies View RelatedJust upgraded my PC and before when I select plot quality "high graphics" the spreadsheet comes out low resolution, if I use monochrome spreadsheets came out perfectly defined.
Now with the new PC High graphics still comes out the same but when I select monochrome all I get is a solid black block. If the OLE object is an image (BMP) it comes out perfect with monochrome,it only happens with excel files
I search the forums for an answer but the closest I found was changing the OLE type under properties (currently is embedded); problem is the field is grayed out and cannot be changed just as the source application (ms excel 2003)
By the way, on the older files created with my old PC if I just open and print them from the new computer they come out perfect; if I open the OLE file and modify it, the solid black block shows up regardless if I print to PDF or print on paper.
When I try to plot the file from the layout the middle and right part of my xref'ed image comes out as a black box - the top, bottom and left edge are fine. As are the line-drawings from two other xref on top of the image. The problem accourse both when I try to a physical copy on our plotter and when I try to plot to a pdf.
I'm working in autoCAD 2013 for mac and the files I'm working on are located on a server.
Because of the problems with wipeouts, I have switched to using some solid hatch set to colour 255. The hatch is in paperspace, sitting under titleblock and other Layout text. I am plotting to an HP1050C, using a .ctb file with 255 set with grayscale off.
The plot preview is fine, but the hatch blocks come out black on paper. I thought this was the problem with wipeouts, and that hatch didn't suffer from it.
I'm using Autocad 2002LT and I have two different drawings to plot. I'm on Windows XP operating system with a TechJet 5536 Plotter (don't laugh it's the only one available.) One drawing is my own work and one is from a supplier they have emailed to me.
When producing a plot of my own drawing, I can easily plot monochrome, the plot style table (pen assignment) is set to monochrome.ctb.
When producing a plot of the suppliers drawing, it will only plot colour even though the plot style table (pen assignment) is set to monochrome.stb.
I can edit the monochrome.ctb colours if I wish to but I do not seem to be able to edit the colours of the monochrome.stb plot style.
The stroke only shows up when I save the file as a pdf as I zoom in the line gets smaller and smaller but never goes a away. In InDesign and on the PSD file the edges look fine just all white around the "horsefly"
View 4 Replies View RelatedIn plot preview I allways get black background. How do I get white background back?
View 1 Replies View RelatedWhen printing a plan with a background mask, the mask shows as a bunch of ting gray dots. Also we have a plot style, using STB, that is supposed to print white, but it too prints as a light gray hatch. It is not that big of a deal until we scan to run sets. The dots and hatch get picked up more intensely by the scanner and it looks like hell, a big gray background. It happens on label masks too: contours, structures, etc. Wipeouts are okay, but those are not used much anymore. I am printing to an OCE TDS600 with current drivers, I have even tried older drivers. I also tried printing to DWF then to the printer and got the same result. Printing to DWF actually added little gray plus signs for the wipeout. The scanner is a OCE TDS600, and we plot with the grays & lines setting.
I have heard the dots are unavoidable, but I really don't want to believe that because it makes our plans look like crap.
I have been having this issue with autocad generated color PDF printouts having "fuzzy" fonts and some other black objects. What I have traced it to is that the PDF created by the stock Autodesk PDF ePlot renderer/driver is printing those fonts (and other things like lines with global width) in rich or enhanced black. 75,68,67,90 CMYK to be precise. When this is done without some sort of 100% K border (and sometimes even with) it leads to a blurring of the edges because the registration is never perfect. There is often even some ghosting due to the sheer amount of toner.
Some printer drivers have a way of forcing or selecting this "Enhanced Black" but I see nothing in the settings. I wonder if this can be externalized. It seems that at least fonts should almost never have this turned on.
For some reason, when using publish in 2012, it keeps taking me out of whatever window I have active at the moment. In all my versions of cad, I've never once had this issue.
View 3 Replies View RelatedIm trying to plot a drawing and the grey lines are printing on top of black. how do I get black to print on top of grey? I am using MEP2013
View 4 Replies View RelatedWe are attempting to move from using ctb plot files to stb plot files but we are stumbling out of the gate. How to convert an existing drawing over?
View 1 Replies View Relatedwhen I try and plot drawings from autocad I only get half the drawing, sometimes just a strip of blank paper. This is for standard A0 drawings and custom oversized drawings. Plot preview is fine, the same drawings can be plotted by my 2 collegues. We all have the same computer specs, same program, same drivers, as a department we had new computers about 3 months ago. We use 2013LT. I can plot the drawings but it means using True View to open and plot the drawings (same computer, same drivers, but it works) I repeatedly asked our IT department and finally got them to look at the computer, the answer was "yeah, your right it doesn't work".
Autocad 2013LT
Windows 7 professional
I downloaded (from someone) a simple dwg cad file, that had 255 lines, each with a different autocad color (colors 1 thur 255). I used it to plot with different ctb files, so I could see at a glance the lineweight the color printed.
View 4 Replies View RelatedIm having an issue with drawings plotting too light in AutoCAD 2013. Polylines with a specified thickness of 1/32" will print dark, but the rest of the drawing is almost unreadable because it is too light. "Plot with Plotstyles" is selected
I can use 2009 to print, which is also installed on my machine, and the drawing will print as intended.Using the same plot style, same settings in both.
I was wondering if there is a way to set the plotter to cut directly after the drawing. i have changed the setting to extent but it still prints the whole page size.
View 9 Replies View RelatedI'm trying to plot a lot of drawing files that are in model space. We use to do this with batch plot. Is there still a way to do this in 2009.
View 7 Replies View RelatedAm trying to plot my drawing to a pdf, but none of my thicker line weights are showing up when plotted to pdf . Am using .stb style and all my line weights etc under general properties are set as by layer.
View 5 Replies View RelatedWhen I try to plot my drawing, my drawing only takes up 2/3 of the page on print preview. The top half of the page is blank. How can I make my drawing take up the whole available page?
View 9 Replies View RelatedHow can I print my drawing on to black paper so all lines are white? Where can I change the color settings etc to do that?
View 9 Replies View Related