AutoCAD Print / Plot :: Background Mask Dots

Mar 10, 2010

When printing a plan with a background mask, the mask shows as a bunch of ting gray dots. Also we have a plot style, using STB, that is supposed to print white, but it too prints as a light gray hatch. It is not that big of a deal until we scan to run sets. The dots and hatch get picked up more intensely by the scanner and it looks like hell, a big gray background. It happens on label masks too: contours, structures, etc. Wipeouts are okay, but those are not used much anymore. I am printing to an OCE TDS600 with current drivers, I have even tried older drivers. I also tried printing to DWF then to the printer and got the same result. Printing to DWF actually added little gray plus signs for the wipeout. The scanner is a OCE TDS600, and we plot with the grays & lines setting.

I have heard the dots are unavoidable, but I really don't want to believe that because it makes our plans look like crap.

View 5 Replies


ADVERTISEMENT

AutoCAD Print / Plot :: Background Mask Plots Partial Black On MText

Oct 16, 2012

I have this problem with my MText Background Mask. You can take a look at the two attachments. Each one gives me the same issue, but with different MText objects. I'm also plotting to a KIP5000 and a SHARP All in One, and I get similar results, except in some of the MText, they come out in a random color as well. The pc3's for all devices are set to Lines Merge.

The text is actually part of an xref file, and if I plot directly from the file they are in, I have no problem. I did a test where I copied the text into the sheet file, and got similar results when the text is in modelspace, and I got my intended results when the text is in paperspace. Now, this is the way I want to go...but the company standard is to draw it all in the xref, so I have to figure out how to get around this.

I've gone back and forth with the Merge/Overwrite options in the pc3, and when plotting to PDF and SHARP, I get the correct output with Overwrite, but the KIP just completely ignores the background mask with Overwrite. 

View 4 Replies View Related

AutoCAD Print / Plot :: Print To A PDF With Black Background

May 20, 2011

Is there any way to print to a PDF and have the background remain black? I know how to make the colors stick for the objects but colors like yellow and cyan are hard to see on a white background.

View 4 Replies View Related

AutoCAD 2010 :: Plot Thin Lines And Dots When Plot Transparency Option Is On

Feb 6, 2012

I have a problem to plot thin lines and dots when Plot Transparency option is On in the Plot dialog box.

The lineweight is a half of the original. I think i have tried everything.

It shows correctly in the Plot Preview but when printed there are no dotted hatches and lines are much thinner.

View 9 Replies View Related

AutoCAD Civil 3D :: Background Mask Not Masking When Lines Merge Is ON During Plot

Apr 25, 2008

Try plotting to a PC3 format with Line Merged option on under the properties for the plotter. Note how the contours continue through the text.

Try plotting with Lines Overwrite. Note how the contours don't go through text.

Any users out there saying they cannot use the "Lines Overwrite" option and need something else so they can still use the Lines Merged option and have their contour text looking good. How to get this in a SP or HF soon. Otherwise it may be deferred to 2010 and so on and so forth.

View 9 Replies View Related

AutoCAD Civil 3D :: Background Mask Doesn't Show / Print

Jun 17, 2012

I'm on Civil3d 2010.  I have a drawing where i have background masks on most of my text - everything works great.  Then I did a "Save As" to give the drawing a new name.  After working in it for a day or so, I noticed that all of the text masks don't show.  When I hover over mtext (or blocks with mtext), a border shows around the text (only when hovering).  But bottom line is the background mask doesn't show at all or print. The original drawing is still fine.

I've checked and this has nothing to do with line merge in the pc3 file etc.

View 5 Replies View Related

AutoCAD Print / Plot :: How To Get White Background Back

Sep 19, 2012

In plot preview I allways get black background. How do I get white background back?

View 1 Replies View Related

AutoCAD Print / Plot :: Place Black Background On Drawing?

Aug 28, 2013

I am trying to place a black background on a drawing so once it is printed it will be easier to read. I place a solid hatch in a boundary and use the DRAWORDER command to place in underneath everything else, but when I plot the dwg to pdf the black hatch comes out grey in the pdf (see attached pdf)

Is there an alternative that I can use to add a black background to a dwg?

View 2 Replies View Related

AutoCAD Print / Plot :: Publishing In Background - Active Window?

Sep 8, 2011

For some reason, when using publish in 2012, it keeps taking me out of whatever window I have active at the moment. In all my versions of cad, I've never once had this issue.

View 3 Replies View Related

AutoCAD Print / Plot :: Print / Plot Preview Shows Section Of Drawing

Jan 20, 2012

I'm using autocad 2000 and I have a problem printing & plotting.  The print, plot preview only shows a section of the drawing. What settings do I need to change for the entire drawing to print for the paper size I need.

View 3 Replies View Related

AutoCAD Civil 3D :: Hatch Background - Color Mask To Show On Screen Green And Gray But Plot Black And Gray

Feb 27, 2013

My company is switching from ctb files to stb files. With the ctb file, we make concrete hatch with two layers. A top layer with the concrete hatch pattern and a background layer with a solid hatch patern. The ctb file concrete plots the concete hatch black and the solid background hatch light gray. I am using civil 3d 2013 and the hatch allows a seperate background color mask. I am trying to make all my concrete layers (Top of Curb, Curb Flowline, etc.) a certain color scheme, i.e. shades of green. I would like my on screen concrete hatch patern to be a green color with a gray background, but plot the concrete hatch black with a gray background. I can not figure out how to do this without making two layers. Is there a way to use one layer and utilize the background color mask to show on screen green and gray, but plot black and gray?

View 4 Replies View Related

AutoCAD Print / Plot :: Change Plot Setup To Multiple Sheets For Use With Batch Plot

May 21, 2013

I have one drawing per file at model tab. When I need to plot a multiple page file, I use:

Print > Batch Plot.

The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.

Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.

View 1 Replies View Related

AutoCad :: Plot Lines From Xref Are Small Tiny Points / Dots Instead Of Continuous Line

Oct 19, 2012

I have a problem with plotting my layout. When I plot, the lines from the xref are small tiny points/dots instead of a continous line. All other lines are OK. What could be the problem?

View 7 Replies View Related

AutoCAD Civil 3D :: Background Mask (Text Mask) Editable In 2012?

Mar 22, 2012

how to manipulate the size of the wipeout for a text mask. 

Simply selecting the masked text in C3D 2011 provided pick boxes at the four corners of the wipeout, making it very easy to manipulate the size of the wipeout box.  I'm hoping to do the same in C3D 2012, but the wipeout seems to be treated like a block and lacks the pick boxes.A system variable maybe?

View 5 Replies View Related

AutoCAD Print / Plot :: Mac Doesn't Allow For Proper Printing On Their Plot Style Setting

Aug 29, 2013

I am a Mac user and new to AutoCAD. I am enrolled in a CAD class this semester and the instructor for my session is requiring Windows. Supposedly this is because AutoCAD for Mac does not allow for proper printing on their plot style setting. 

I understand that I can install Bootcamp and Windows on my computer, but I'd really like to avoid that if I can. If I were to do my work on my Mac and then digitally transfer my files to a PC for printing purposes, would my files become corrupted or compromised in any way?

View 2 Replies View Related

AutoCAD Print / Plot :: Sharing Plot Files 64bit With 32bit Machine?

Aug 21, 2012

Can users with a 64 bit computer share pc3's and pmp's with 32 bit users without adverse effects?

View 1 Replies View Related

AutoCAD Print / Plot :: Publish To DWFx Plot Stamp Layer

Aug 29, 2011

When I publish a drawing as a multipage DWFx (or PDF for that matter) with "Include Layer Information" selected, the Plot Stamp (Simple Date/Time and Text) comes out but on different layers on different layouts.

Example:
First Layout : Plotstamp resides on Layer 0
Second Layout: Plotstamp resides on Layer 3P
Third Layout: EQPT-VC
etc

Some general information:
Autodesk AutoCAD 2011 64bit
Autodesk DesignReview - 2012
Adobe Acrobat X Professional

Layer 0 Is thawed/plotable and on in all layouts, viewports all layers, viewports.  It has at least one entity per layout

Is there anyway to rectify this and still use the built-in Plot Stamp?

View 2 Replies View Related

AutoCAD Print / Plot :: 2007 Not Reading Plot Styles Correctly

Jan 17, 2012

So the firm I work at has AutoCAD 2000 and 2007. 2000 is installed on 5 out of the 7 computers, and 2007 installed on 6 of the 7 computers. 2 of the computers running just ACAD 2007 are Windows Vista, while all the other computers are Windows XP. We have an OCE TDS320 CAD Printer, an HP Wide Format Printer and a Panasonic 330 Copier/Fax/Printer. Our Problem is that When you try to plot an ACAD2007 drawing it will only plot it in color. This problem did not exist before 1/12/12.

When I select the Plot Style to print I select "monochrome.stb" which has always worked, now all of a sudden it doesnt. The only way i have found to fix this problem is to change my drawing to layer "0" which is white, so when it tries to print in color it will print black. Another Guy in the firm i work at has ACAD2007 on his computer running XP, he also has 2000 running on the same computer. When he tries to plot on ACAD2007 the same thing happens, so it is not isolated to my computer.

There is a difference though between his Plot Styles on his computer and the ones on mine. His end with .ctb, which works. It only doesnt work when he tries to print a drawing i made off of my computer. Because of this we copied his Plot Style folder for AutoCAD 2007 and installed it into the folder with all of my plot styles on my computer, replacing the ".stb" with ".ctb" That did not work at all. The last thing we tried was to copy over a file that plotted correctly, delete the drawing and draw what we needed, This also did not work. So basically we are thinking that ACAD2007 is not reading the Plot Styles correctly, or the Plot Styles are wrong or currupt.

View 1 Replies View Related

AutoCAD Print / Plot :: Plot Results From Paperspace Are Different From Model Space?

Jan 17, 2013

I have several objects on various layers in model space and they are exposed through a viewport in a paperspace layout. I also have a corporate CTB plot style.

Here is my problem: If i plot the objects from model space, they all plot with the correct lineweights as defined in our corporate CTB, but when i plot them from the paperspace layout, some but not all objects plot with a heavier lineweight than what is defined in the CTB.

I thought the CTB was supposed to override any settings applied to individual objects, but more importantly, why the different results, on the same objects, depending upon the space from which they're plotted?

View 3 Replies View Related

AutoCAD Print / Plot :: Publish Vs Plot - Image Shifts And Border Cut Off

Aug 13, 2012

I have found that when I Publish, the drawing comes out shifted about 1/8" down and 1/8" left as compared to when I use Plot. Which of course is just enough to cut off the sheet border which is 1/2" from the paper edge. I am using the same Page Setup for both Publish and Plot, same drawing.

This is to an Oce TDS600, and it only happens with 15x21 paper size. All paper sizes are set to 0" border. Probably an Oce issue, but have any of you seen this before?

View 1 Replies View Related

AutoCAD Print / Plot :: Poor Plot Quality With Aerial In 2012?

Aug 8, 2012

I recently upgraded from 2010 to 2012 and when trying to plot, using the very same page setups as before the upgrade, the quality (or resolution) of the plot is very poor and pixelated.  I am using very high resolution aerial imagery.  The output is not at all high resolution (totally pixelated, not presentable as professional).   It seems like AutoCAD is reducing the image quality now.  Is this a system variable that can be adjusted? 

View 1 Replies View Related

AutoCAD Print / Plot :: KIP 3100 With 2011 Heidi Driver Crashes Upon Plot Preview

Sep 1, 2011

AutoCAD Architecture 2011
Windows 7 x64
8GB RAM

Created new PC3 for KIP 3100 plotter using its AutoCAD Heidi driver for Win7x64. Upon plot preview the following error occurs.

This causes a crash report which has been submitted to Autodesk.  The response was to install service pack 2.  Error still occurs after installing the service pack.

Using the non-AutoCAD driver works.

View 1 Replies View Related

AutoCAD Print / Plot :: Cannot Choose Plotter In Plot Manager

Jun 25, 2013

In AutoCAD 2014 and ASD2013 I cannot choose one of the printer, which is installed on Windows (OCE TDS600). It is strange, because Autocad sees it on the list of available plotters, but when I try to select it - it automaticly changes to "None".

The plotter is properly configured - I can print with it from Revit 2013 without any problems. Also when I switch account to any other (on that same computer) everything works fine.

I tried to add this plotter through "Add-A-Plotter Wizard", but each time I obtain an error massage "Autodesk Hardcopy component failed..."

[URL]

View 2 Replies View Related

AutoCAD Print / Plot :: DWG To PDF - Lines Plot As Gray Instead Of Black?

May 9, 2011

Unfortunately I am using ACAD 2000 so bear with me and the only ACAD training I have is a 3 day crash course at the local software reseller.

I am attempting to plot a drawing that was created from a template into a .pdf but it is plotting colored lines instead of black lines. 

Here is some background info.  My template is set up as a .dwt which I will save as a .dwg when I begin to make my drawings.  Plot style table is “monochrome.stb” and I have selected Adobe .pdf as my plotter configuration.  I then select the “Properties” then go to “Custom Properties”, “Paper/Quality” tab and then select “Black & White” as my color.

When I go to plot the drawing as a pdf and do a preview of what I am about to plot, I see that the lines that make up the drawing are a shade of gray in color.  All my lineweights in the layers property manager are set to default.  I have attached a blank drawing that is based off of my template.

View 1 Replies View Related

AutoCAD Print / Plot :: 2004 - Set To Plot To File / How To Change

Aug 14, 2012

2004 and how to turn "plot to file" off?  Any time they go to plot the plot to file is already set and grayed out.  It has been way too long since 2004 and I don't know where to have them look although I assume it is in Options somewhere.

View 2 Replies View Related

AutoCAD Print / Plot :: Application Terminates When Plot Command Is Given

Apr 27, 2012

I'm using autocad 2011 LT License version 5 users & autocad 2012 Lt License Version 5 users.I have got a HP Laserjet 5200 printer, when i give a plot command from one of the workstation having autocad 2012 lt

the application gets terminated automatically every time.This issue is only with a single client having 2012LT all other autocad LT 2012 workstations in the same network plots w/o any complaint.

View 2 Replies View Related

AutoCAD Print / Plot :: Layers Turned Off Plot Unless They Are Frozen?

Sep 13, 2013

I have a user which we just installed Autocad Civil 3D 2014 on his computer that is running on a Windows 7 64-bit OS.  However, he has had the same problem with Civil 3D 2011, 2012, and 2013 ever since we took him to 2011 in September 2011.  So, it is not something new.  It may have been around before then but my companies common practice back then was to freeze layers with a script file before plotting.  While attending a class back in 2010 or 2011, he and his group were told to “do not use FREEZE on layers in Civil 3D” since things frozen did not get updated like they would if they were just turned off.  So, they have been using the “ON/OFF” commands on all Civil 3D files since then.

Here is the problem:

A drawing, typical of this and other jobs he does, has a title block which is an xref in paper space and the site plan xref in model space.  He can turn "OFF" certain layers from the site plan as viewed from paper space to remove clutter and then go to make a plot.  After getting it set up to print and going to the preview the layers he has turned off appear in the preview and if he goes ahead and makes the plot or PDF those layers that were turned off will plot out.

The work-a-round they have been using ever since has been to go back into the file(s) and “FREEZE” the layers that were turned off, make the plots and then go back and “THAW” the layers before ending the drawing.

Things we have tried:

Set Visretain=1
Used the “Publish” command.
Set Layerevalctl=0 or 1

Is there a way to use ON/OFF instead and have the layers NOT plot out?  OR, is this something that AutoCAD will not do regardless?  Has it always been that way and we have been unaware of it through the past four releases?

View 5 Replies View Related

AutoCAD Print / Plot :: Delay In Plot Manager Window

Feb 18, 2013

I have a network with Windows XP and Windows 7.

Printers: from HP 5000 series to a KIP 3000.
CAD,from 2008 to 2012 versions.ALL of the PCs are having this strange behaviour:Open a drawing, Press File then Plot and..

Scenario 1: if the KIP3000 is online then plotting window comes in few seconds, a normal, decent delay!
Scenario 2: if the KIP 3000 is offline then plotting can be delayed to minutes!!!

Downloaded the drivers from KIP web site, installed and tested, prints fine once the above issue with delay is sorted! I’m guessing that is something built-in CAD, pre-emptive, background checks running for printers status when you attempt to plot to the printer / plotter !

View 3 Replies View Related

AutoCAD Print / Plot :: How To Adjust Grayscale In 3D Model Plot

Sep 28, 2011

I need to plot a drawing with a few plans, which are in 2D but also a 3D model of the intire installation and a few side views, which are side views of the 3D model.When I plot the drawing I am able to get the side views in black and white by taking the following steps:(i got these steps from this post: URL....

- set the visual style (in model space) to hidden or wireframe.
- in the layout you select a viewport that conntains a 3D visualisation and double click in that window to set the visual style to 2D wireframe and also set the viewports shade plot to hidden.

because the plotter is black and white only I see those side views in different shades of grey but the problem is that the difference in grey isn't clear enough (and yellow pipes are hardly visible) and I can't adjust these. When adjusting the .ctb it only affects the 2D views and not the 3D views.

It is possible to change the greyness by changing the color of the diffent pipes that are in the drawing but this is not a desired option by the client.how to alter the shades of grey in 3D visualisations so that not all pipelines look the same .I attached a file of what the plot preview looks like and another of what the actual plot looks like

View 2 Replies View Related

AutoCAD Print / Plot :: Pixelated Plot Of PDF In File When Printing To PDF

Apr 8, 2010

I am plotting a file that has a pdf referenced into it. The quality of the plot is degraded only at the inserted pdf. The rest of the AutoCAD file looks fine. The inserted pdf is a printed AutoCAD file which looks clear and even has embedded layers and linework I can snap to (which seems to indicate that there is vector information present when it is in Autocad.

I have attached an image with 4 zoomed-in screen shots to show what I'm describing.

View 6 Replies View Related

AutoCAD Print / Plot :: 3D Drawing Won't Plot In Black And White Using CTB

Nov 21, 2011

We do most of our drawing in 2D – quaint I know, but that’s the way the office works.  On occasion we’ll do something as a solid model to guide a client understand a complex roof or a clearance problem. We started a model for a project we are working on and ended up using it as building elevations.

The problem is with plotting. If I use our standard office CTB (which is set to print as black), I get color printouts no matter what I try. I have tried using an STB and changing all our layer colors to “7” in an attempt to make it print black, but I'm getting extremely undesirable - seemingly random - line weight results.

The client wants the next project done in 3D as well and I’d like to be able to have the elevations look right.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved