I'm working with point clouds. is there any physical memory limitation working with autocad. because i had 32gb ram but didn't see over 4 gb for usage by autocad. my computer's os is win7 x64.
View 3 RepliesWe recently moved from Inventor 2010 to 2013. Since then we have been having alot of lag problems. One major problem we have found that is giving us lag is our RAM usage. Inventor continually steals more and more ram until its starts to lag out. When I open a large assembly inventor goes from useing 1.2 GB to 4 GB of ram. When I close the assembly the RAM usage stays at 4 GB. If I open another assembly it just builds onto that and can go up to 6 GB before it starts lagging badly. Closing inventor dumps the physical memory.
System:
windows enterprise (no service pack) 7-64 bit
intel(r) Xeon(r) CPU (2 processors)
9 GB RAM
Nvidia Quadro FX 4800 graphics card
I could open my autocad and inventor dwg files (No I can't post them) fine w/ 2011. Now we upgraded to FDS 2013 and I keep getting this error.
Close programs to prevent information loss:
Your computer is low on memory. Save your files and close these programs:
Autodesk Inventor 2013
We design long overland conveyors that can be kilometers long. In two separate instances, I have extruded a profile along a path that is a few hundred meters long with no problem. However, when the path gets to around 700 meters, the extrusion that worked fine at 600 meters simply falls apart. Does Inventor seriously have a limitation to length of an extrusion?
View 9 Replies View RelatedI have just produced .dxf files from .shp files using Surpac. The problem is that the final .dxf's are that huge in terms of memory that is really dificult to open the .dxf with any version of AutoCAD
View 2 Replies View RelatedI have CAD2014 installed intalled everything has been great until last week when I got an error that I had low autocad memory. I still have 127GB available on my PC. Since I received this errow I have noticed that when moving large amounts of items on a drawing, there is a big delay in the move.
View 2 Replies View RelatedI am trying to make a huge array of circles (4000 x 12000 or so). I work in microfabrication and need this to make a mask for lithography of a membrane. What is the best practice to minimize the memory usage? I.e. arrays, blocks, groups? I tried making an array of circles one row and 4000 columns then making that a block. Then repeating that block down for multiple rows, maybe 100, then making that a block. Repeating this until I have thousands of them. Is this the best way? It bogs down and gets incredible slow which I am hoping to avoid. I realize that it is inevitable that it will get slow with these huge numbers.
View 1 Replies View RelatedI am having a problem using 2014 civil 3D. When I import las files and create a point cloud, and go on to make a surface from those points, it is limiting the "number of points added" to 340134. I am using the lidar las files which each tile or file has an average of 12 million points, and I have tried to create a surface using one file, and up to 28 tiles (where there should be 340 million points). Regardless, one of the files contains 12 million points and I do have the "point density" set to 100, and the "real time density" set to 100. Why will it only use 340,134 points? I have tried all options from "point cloud extents" to "window" and same result. All the points from the cloud are there and displaying fine, it just seems civil 3d is limiting the number of points used for surface.
View 3 Replies View RelatedI was placing final touches on paper space viewports (changing transparency settings etc), after wrapping that up, saved. Then tried to Publish. That's where things went downhill, drawing/publishing froze, forced to restart, now the drawing only loads to ~68 - 75% and hangs / freezes. Eventually, I get a message box stating that AutoCAD physical memory low, continuing will result in data loss. Task Manager claims AutoCAD is running @ ~98% (650Mb).
I can upload the drawing to AutoCAD WS and open it on my iPhone/iPad, but the 3D viewports are limited in detail.
Tried opening on a MAC and the same thing happens.
Tried clearing the Cachemax/cachemaxtotal, still nothing...
Say I have a model and some layouts in a file.
I open the file to the model. My RAM usage is about 33%. Next, I open the first layout and my usage climbs to 43%. I open the second layout and my usage climbs to 52%. I open the third layout and my usage climbs to 62%.
I can go back and view the layouts already opened marginally faster then when first opening them, and my RAM usage will not increase.
If I continue to open new layouts, my computer will spend all its RAM holding these and freeze. My computer will suspend graphical processing and be forced to run on sips of RAM until all active commands are finished. But RAM usage will never decrease.
I have been working with my Windows Task Manager open in the corner, watching this happen. This way, I can save and close the file to clear the RAM and then proceed to reload the file and continue working on my file with 34 layouts.
I do not know if it is a function of storing the UNDO functions, or just how the program is designed, but this is a problem for me.
QUESTION
Is there a way to clear the UNDO or layout memory without closing and reloading the file? I do not have to close AutoCAD - just the file.
ATTACHEMENT
The attachement is a screenshot of my Task Manager.
I started with TM, browser, and AutoCAD open (I had already started writing this post)
I opened the file to the model.
Opened up 6 layouts (you can see the bumps)
Saved (you can see the tiny rise)
Closed the file, but not AutoCAD (precipitous drop ;] )
Lastly, I reloaded the file.
Windows 7 64bit w/ 64bit AutoCAD 2013
Does Object Reactor has an owner size limitation?
when the owner size is big (about 1000) trying to disable the reactor (vlr-remove ReactorObj) causes AutoCAD to crash right on spot.
does Max have a limitation on the amount of fonts that it can access. We have Adobe Font Folio 11 and although I have installed all the Fonts from the package onto the system, I am not seeing all of them when I try to access them from the Text Shapes parameters. Not a deal breaker because I can always set what I need in Illustrator and import as paths, but it would be nice if I could see them from Max.
View 1 Replies View RelatedWhen importing 3d objects (any format 3ds or obj) into latest Photoshop 3D enviroment... It limits me to 10 frames in timeline.
View 2 Replies View RelatedI was looking for a simple piece of software to do basic but frame-precise clip editing like trimming and I learned about Corel VS. (Well, I was looking for a tool to work with less common formats like flv, f4v but...)
Anyway, I stumbled upon this message that reads like: "the current operation can't be completed because the current clip's duration is less than 3 seconds". I tried both in easy and advanced edit but I simply can't trim a clip.
I am using corel x3 a long time but never, never had this kind of problem. When i work in corel enviorenment after i have finished my work i go to save my work. But then is the problem It Saves the file with Large Memory on it. let's say if the file normally would be 200 K, now it saves with 3 MB. And if i import some other files in my work then the saved file will be even bigger. If i Delete the files that were imported The Saved File will be Again the same SIZE ! Even if a take one part of the file, let's say if i import only one small text and put it in another file and save it like that, the saved file will be 2 MB. I had a lots of problems, i had saved files on this way with 23-24 MB and when i open them it takes like forever. When you look that file in corel it has nohing in it, absolutely nothing that should be 24 MB. But all of my important work is in that files how to make all things back to normal again,
View 9 Replies View RelatedI do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.
I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.
What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.
To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem.
Where from comes this memory usage difference?
My PC:
Windows 7 - 32bit
4GB of RAM
Intel Core2Duo 2 x 3.0GHz
700GB free space on drive C:
Currently I am using I-logic and a form. I have an assembly that I am pushing a volume from a part to the main assembly. The volume updates in the part fine. The issue is with the form is not updating when the file parameter updates. If I exit the form and run the rule manually then the form updates. how to update the form at the same time?
View 1 Replies View RelatedTwo questions.
Is there a way to add new materials to physical properties?
Is there a cloud feature in Inventor for drawings, or is that something that can only be done in Autocad Mechanical and Mechanical Desktop?
I have recently made a bucket for chain (linked) and was looking to put the chain in the bucket for visual purposes and to see if the capacity of the bucket is correct.
I can get the chain linked together, however when rotated round it passes through another piece of chain.
Is there a way in inventor to tell a part/assembly of it’s physical/mass properties? I know you can make something mild steel and get weight etc, however if not constrained it still passes through as if it’s a ghost.
how I can update the physical properties for a part or assembly, from a drawing? My drawing template is showing the total weight for the current part/assembly, and I would love if Inventor could update this using iLogic, so I don't get the "N/A" value all the time.
View 5 Replies View RelatedI have some issues with the notation for physical properties in the Inventor 2013 material editor.
Instead of displaying the obvious first choice metric SI notation kg/m^3 or something similar it display a self made? and awkward N*s^2/mm^4. I don't want this notation. How can I change to something more user friendly? It can be a bit hard to distinguish if a material have 0.00000000001 N*s^2/mm^4 or 0.0000000001 N*s^2/mm^4.
The document properties "units" folder have mm, seconds, degree and kilogram as default.
I'm trying to add some material properties to a STP or IGES file I've received from a customer (in Inventor 2011). Is there any way to add a density for example, so I can obtain the mass of the model? I've tried doing it through the iProperties menu but it's not giving me a mass.
View 3 Replies View RelatedWhen I duplicate the Material in the Material Browser all appearance and Physical properties are duplicated too.
So I must accept or assign the new unique names for appearance and Physical purposes of Material.
In my case I need, for example, the same Material with different appearance, for example knurled and regular.
I cannot save the new Material with existing Physical properties name and it makes unwanted copies like Steel(1), Steel(2) in Assets.
After I made a copy I can reassign the Physical properties back to existing but it takes a time of replacing assets and deleting unwanted copies.
Is it possible to make a copy within the same Physical Assets?
How do I set a constraint where 2 parts are attached to each other but do not phase through. For example if I have a door in a door frame, how do I add a constraint where the door can swing on it's hinges but get stopped by the door frame.
View 1 Replies View RelatedI have a .iam and .idw that i copied/designed from vault. The .idw has a sketched symbol that has a text box with the mass property. When update mass is applied the mass property in the text box does not. I ran into this once before and got it to work by re-inserting the symbol into the .idw but I can't get it to work. The orginal that was copied from works fine.
IV2013
Vault Collaboration 2013
Inventor seems to do lots to allow for simulated appearance textures. However, how does one use actual physical textures, e.g. for a plastic part? I need one surface of the plastic part to be very rough/bumpy, another to be slightly rough/bumpy, and another to remain smooth/untouched.
Let me be forthright and say I have no background here in textures/plastics/molds etc.,
Al my projects, settings and templates use the Metric system.
When i open the material physical properties i see the Imperial System.
How can i change this ?
Is it possible to edit mr physical sky to look like the sea.
I have attached three images from a job that i am working on at the moment. The sky looks really good but the dark gray looks pretty grim. If there is a way to make this gray area look like the sea?
I am rendering still images of construction stages. I am using a daylight system and i am wondering if its possible to change the mr physical sky to my own photo.
The images are of an oil rig so the photo is a very simple view of the sea with the horizon off in the distance so is very similar to the mr physical sky just more realistic.
It appears Max has no native way to match a physical tilt-shift lens like Maya, Modo, etc.?
I have a scene where I need to match the tilt-shift from a physical camera. I received photo tests, one with the camera pitched and without tilt-shift correction, and another with the tilt-shift lens used to correct the issue.
Using Modo I matched the virtual cameras to the physical camera during the design phase. Using Modo's Film Offset Y setting, I was able to put in the precise tilt-shift settings from the photographer to get a match.
Now in Max/V-Ray, I imported the Modo camera, made the necessary adjustments while establishing a vray camera and matched the camera without tilt-shift.
But I cannot match the tilt-shift corrected lens since V-Ray corrects the tilt-shift without altering the perspective like a real tilt-shift lens does. So the V-Ray camera vertical shift feature works great until you're trying to simulate a real tilt-shift lens.
Max's native camera doesn't support this either. Yet I was able to replicate the modo & real camera setup within minutes using the Maya camera.
I recently watch a movie with a couple of dinosaur characters fighting each other, and now I wonder: dealing with a lot of potential geometry interpenetration scenarios?
How do you deal with characters physically interacting with each other, as in two characters fighting, or hugging? Do you know if there is any nice tutorial covering that subject? I do not mean about clothing. That's a matter of dynamics and simulation.
regarding characters interacting with objects. Imagine a human character lifting a huge heavy barrel. The arms around that barrel should look like pressing against it. Or a person stepping up an extension ladder.