Presspull doesn't work. When I click in a boundry responding to the request of the "Presspull" command, nothing happends. It doesn't recognize any region, even a region of a circle.
View 1 RepliesI have drawn a plan of a house. I used the presspull command to lift the exterior walls 3m. The problem I am facing is when I attempt to lift the internal walls, there is a grid pattern that forms, whereas no pattern has appeared on the external.
I have looked through properties but I can't seem to change the pattern. I am using AutoCAD 2014.
I have a 2D drawing that I used presspull to give the correct depth to. Now I have to make modifications to it that are angular to the presspull direction and am not sure that presspull is the correct way to do it. I've searched around for vids and have looked at quite a few, but am stumped. Don't know if I need to change the orientation so that the angle I want to cut is the direction for presspull or if I am simply looking at the problem wrong. If I knew how to take a screenshot, I would post some so that it would be clear how inept I am.
View 6 Replies View RelatedI've drawn a 3d object by revolving a 2d surface. the problem is, if i draw a box and want to presspull an area on any of its surface i can draw draw the area on that surface, but when i try to draw the area to be presspulled on the 3d object that was drawn by revolving it doesnot come on the desired surface, rather it comes on the X-Y plane.
View 9 Replies View RelatedThe problem I'm having is presspull/extrude irregular shapes.
I have some really weird, irregular shapes that's consisted of fillets, lines, and arcs. For some reason I cannot REGION it. But I can HATCH it, and give it a solid inner part.
My irregular after being filled, can't be extruded. When I try extruding it, the command line goes "This kind of shape cannot be extruded", without any explanation, or keywords.
Then, if I try to PressPull, it only PressPull the outline of the irregular shape, without pulling out the inner bulk part.
Then if I try to do anything more, my AutoCad likes to go "About to regen -- proceed?" error.
Are there any switches or settings needed to activate, the object boundaries when using the PRESSPULL command in autocad ver 2009?
View 5 Replies View RelatedI am using AutoCAD 2013. During the creation of 3D while I am using Presspull Command, it works fine in the beginning after some time, AutoCAD seems to be hang while I took the command but once I press Esc, AutoCAD continue working.
View 2 Replies View RelatedI am semi-new to AutoCAD but have a fairly good knowledge of how to work the program now. However, I am continuously having problems with the presspull command. When I try to use the command on an object, the object is raised but not filled. It looks sort of like a fence/outline around the border of the object with a grid pattern.
View 9 Replies View RelatedI try to load AutoCAD 2010 on windows 7 but it keeps on failing Language Pack - English failed installation aborted, Result 1624 so it rolls back and doesn't install.
View 9 Replies View RelatedIs there a way to use PRESSPULL on a face that's behind or underneath another face. When I use PRESSPULL it always selects the face on top and sometimes I want a face that is behind or underneath that face.
View 3 Replies View RelatedHas any experienced a situation where they were unable to explode a block created with the cut & paste command?
My block "A$C58A67B84" which is an anonymous name created by AutoCAD is a floor plan from a customer in which we need to make changes or additions to however this block acts like when it was created the "Allow Exploding" box was un-checked. I know that was not the case though, since all I did was a regular "Cut & Paste".
How to hatch this pool deck with sun chairs (blocks)? I have included an attachment ...
View 8 Replies View RelatedGoal: to use Autocad 2013 or 2012 with AutoQuoterX II™ from 8020 .net.I first installed 2013 but got the error, then tried updating to latest patch. Then I tried reinstall - no fix.
I then uninstalled and tried install 2012. Updated latest patch - no fix.I am having an issue where I am getting an error message "unhandled exception"..Unable to load DLL 'sqlceme35.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) after which point I can continue and then Autocad is forced to close.
FATAL ERROR: Unhandled e0434352h ERxception at fe169e5dh..Unable to load DLL 'sqlceme35.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)
System.DllNotFoundException: Unable to load DLL 'sqlceme35.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)
at System.Data.SqlServerCe.NativeMethods.SafeRelease(IntPtr& ppUnknown)
at System.Data.SqlServerCe.SqlCeConnection.ReleaseNativeInterfaces()
at System.Data.SqlServerCe.SqlCeConnection.Dispose(Boolean disposing)
at System.Data.SqlServerCe.SqlCeConnection.Finalize()
[code]...
I have a .dwg file and when I try to save as 2010 DXF format, I get the following message:
"Unable to save to drawing c:projectslayout.dxf.
Drawing saved to c:projectssavF29D.tmp"
If I try to "save as" in DWG format with a different name in the same directory then it works. Also, there is no "savF29D.tmp" anywhere. I need the drawing DXF format.
I'm encountering disable of Delete key. Normally i use "Delete" key to erase object after it is selected. Since yesterday i can't use that key anymore. How to check the setting. I'm sure its not keybord's issue coz i can still use the key in other program(Excel & Word).
View 3 Replies View RelatedWhen I am drawing using the "spline fit" I am unable to transfer my DXF to a laser,water-jet, CNC router etc... Is a spline any differnt than a "line? the yellow will show up on the machine, but the green isn't recognized.
View 3 Replies View RelatedI am unable to see the dimensions that I measure using power dimensions as per the attachment on the drawings itself. If i want to see it, I have to select the green line, and right click and select the line and select standard as the dimension style. I did not have to previously do all of this.
View 1 Replies View RelatedIs there another way to turn off dynamic UCS than hitting F6. My ucs change frequently so I constantly have to change it back to world when modeling in 3d.
Is there a way to lock the UCS to world or to a saved UCS permanently. I have no useage of other UCS than world and the ones i saved.
If I get a solution on this problem
why I cannot join the various polylines in the attached example? My objective is to create 2 closed polylines, Line 1 and Line 2.
View 1 Replies View RelatedI have installed AutoCAD (Map 3D 2012) onto a users machine. When I run the software, I get a message box appear saying it cant load the profile...
I went into the registry and noticed that his registry is missing a lot of keys for Map 3D (attached)
I have attached a copy of my registry for comparison.
What would typically cause this? I have tried to delete the registry entry and let it re-configure, but i get all sorts of errors (Internal Error 2738).
I should probably mention that I am using a profile switch in the shortcut.
I can't print dwg to Adobe PDF. Printer drivers ale installed and work fine in other application. Only in AutoCAD 2012 is some problem.
View 9 Replies View RelatedI can see entire drawing in the viewport but i can not see the text. I have checked my layers too. but everything is set right in layers.
View 3 Replies View RelatedI can't seem to get images to show up in 2012. Not all images... just ones that I receive from other folks using LandDesktop 2009. They are usually images of terrain.
View 1 Replies View RelatedMy autosave keeps giving me this message when ever it goes to save. What does this mean?
View 9 Replies View RelatedRunning CAD Arcitecture 2010 and I am not able to use the "save-as" function to save as a dwg file. Using the the same down-load disk I have not had any problem with "save-as" on my laptop.
View 3 Replies View RelatedThis is an AutoCAD 2011 related question about being unable to see under properties objects that I have attached to polylines in AutoCAD Map3D.
I have created an map3d .dwg that the polylines and points have attributes attached (objects). However, when I access the same file in plain AutoCAD nothing appears under properties.
Is is a format, import settings tweak or simply it can not be done?
I am running AutoCAD MEP 2012. I am unable to open drawings that are stored on a network drive. I continue to get a "Unhandled Access Violation Reading 0X0000 Exception at f5bfaad0h" and AutoCAD closes. If I copy that same file to the computer and make it local, it opens without any problem. All files local open just fine. Also, I am able to open the same drawing on the network from multiple other computers.
I have tried to repair AutoCAD and check all network settings on the computer, but everything appears correct.
i am drawing a chamfered-counterbored cylinder... i meet the problem: unable to revolve the selected object ! After i convert the object i drawng to closed Polyline path with the Pedit command, it cant be revolve !
View 1 Replies View Relatedunable to load customization file:
c:usersdantappdata
oamingautodeskautocad mechanical20152
18.2enusupportacetmain.cuix
that customization group already exists.
I have two boxes here where something seems to create a acfusion.cuix, an aliasconcept.cuix and a acetmain.cuix. If I unload them and restart, I dont get the error but the have been created. Could a startup lisp be creating these? I havent done anything with lisp files. the target in the shortcut doesnt seem to be pointing to a lisp file.
We dont need these cuix files how can I stop them from being created on start up?
Dell t1500 i7 8 gb ram
Windows 7 64 bit
ati firepro v4800
We are unable to set the value for system variable "INSNAME" .
It is returning nothing after assigning values for this variable.
We are using below statement for setting the value.
Application.SetSystemVariable("INSNAME ", "test.dwg");
(We are working in AutoCAD 2010. using programming language as .net 3.5).
when I try to open the program I get this message:
The application failed to initialize properly (Oxc0000034) Click on OK to terminate the application.