When I am drawing using the "spline fit" I am unable to transfer my DXF to a laser,water-jet, CNC router etc... Is a spline any differnt than a "line? the yellow will show up on the machine, but the green isn't recognized.
View 3 Replieshow to Explode Spline?
View 9 Replies View RelatedI'm trying to make some 3d spline gears in autocad, I start by generating them in eMachineshop then importing into autocad, this works fine but the gear is imported as seperat lines so I can't extrude them, i also cant join the lines because after zooming in there are quite a few gaps. How I can join the lines together without manually connecting the dots? I'll include a copy of the gear, eMachineshop only outputs dxf files as far as i know.
View 3 Replies View Relatedwhy can't I snap to a knot on a spline when trying to use a dimensional constraint? I can snap any other geometric feature like a line or a dimension string to a knot. I can grab the knot (also seems to be in the same place as the "fit point", yes?) and move it around, so why, why, WHY can't I use a dimensional constraint? I really need to be able to control a spline's fit points with dimensional constraints, but I can't get at them exept to manually move them around.
View 2 Replies View RelatedPath array of a point on spline, I’m wondering why the path array of a particular point on the spline doesn’t force the points to lie on the spline itself!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
How to find the inflection point of a spline???
I create a spline from a list of points and want to know where the curve of the spline changes to be able to dimension this point, it is not necessarily a point that is entered.
I'm trying to create an external involute spline (ANSI B92.2M) Fillet Root Side Fit 26.9mm x 1 mm x 26 teeth x 38 mm long using the spline generator with Inventor 2012. I created a test shaft"M-182-AMA.ipt" that is Ø26.9 mm x 38 mm long with 1 mm radius on each end of shaft.
I use the following steps:
1. After creating component "M-182-AMA.ipt" I select Design tab>>Power Transmission>>Involute Spline.
2. A window appears that has the caption "Involute Splines Connection Generator".In the Dimensions section I choose "Splines Type: ANSI B92.2M - 37.5 deg, Fillet Root, Side Fit, 26 x 1.00 x 38 x 5H/5h" and change the Length to 38 mm.
3. In the Shaft Groove section I use Create new, and I push the Reference 1 button that turns blue, I then select the od feature from the model and I get an error(see attached pic "error1.jpg).
I changed the 26.9mm od to be 27mm and it still gave me the error.
Work Station : Dell Precision R5400
OS: Windows 7 Business 64 Version 6.1.7601 Service Pack 1 Build 7601
Processor Intel(R) Xeon(R) CPU E5405 @ 2.00GHz, 1995 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date Dell Inc. A10, 4/30/2012
Graphics Display Card: ATI FirePro V4800 (FireGL V) 1.00 GB Adapter RAM
Computer Memory: 8 GB ECC RAM
As you can see, the nature of my model forbids me from making a 3D solid using LOFT.
The top surface is consisted of 3D polyline and arc, which if "joined" will be become a spline.
The bottom surface can easily be joined into polyline.
If I loft the top and bottom, it'll only give me a LOFTED Surface, which is not I want (wanted a 3D solid).
I try to sweep along spline that made of elliptical arc and line.
Funny thing that I was able to create a solid few days ago by doing this method. Now I can't!
I tried even reload Autocad.
I was unable to configure a transfer from Factory Design Suite Group. This is more appropriate here.
Approx August, Inventor 2013 started to randomly crash.
Until then it was working fine.
Service packs & several re-installs have not cured it.
I cannot replicate the process.
I am lucky if I get 20 minutes of operation.
One day it actually ran all day. The next it crashed maybe 20 times.
Several projects have only needed 2D work which works fine but I have run out of time to postpone the Inventor projects.
I am working on a personal project and any time I try to detail and texture my character in mudbox, I get no UVs showing in mudbox even tough I have projected UVs in maya before exporting.
View 1 Replies View RelatedI have created our tool palettes that reside on our network. I am setting up a laptop workstation, and use the same tool palettes. The issue is the laptop tool palettes will reside on the C:/ drive, which is not our network drive. Is there an easy way to switch drives without changing each item, on each tool palette?
I have the same directory tree on the laptops C:/ drive, the only exception is the drive letter.
How do I transfer a CUIX file from AutoCAD2012 to a backup?
View 4 Replies View RelatedI am trying to export my license so i can work from home but the utility isn't working.
I always get that message:
License Export Confirmation
Product: AutoCAD 2010
Serial number: 351-XXXXXXX
Export Request Failed
The serial number you entered is not valid. Try again. (1)
Click the "Try Again" link to resubmit the request.
Try again
Error reference:1
The number is the right one and it didn't create any error when installing...
Why does AutoDesk doesn't want me to work from home?
I have installed AutoCAD 2010 onto my laptop (Mac Book - VMware Fusion). All has installed ok
I exported my AutoCAD liscense from my work machine - again all fine. But on my laptop i dont have the License Transfer Utitlity to import it. I have performed a search and it finds my 3DMax LTU but not my Autocad one
How do I transfer 3d polylines from civil 3d 2010 to 2004?
View 2 Replies View RelatedI recently purchased a Nikon D800 (previously had D200).I am unable to transfer my NEF files into Lightroom 3.6 or Elements 10.0.....what do I need to do?
View 2 Replies View RelatedI try to load AutoCAD 2010 on windows 7 but it keeps on failing Language Pack - English failed installation aborted, Result 1624 so it rolls back and doesn't install.
View 9 Replies View RelatedHas any experienced a situation where they were unable to explode a block created with the cut & paste command?
My block "A$C58A67B84" which is an anonymous name created by AutoCAD is a floor plan from a customer in which we need to make changes or additions to however this block acts like when it was created the "Allow Exploding" box was un-checked. I know that was not the case though, since all I did was a regular "Cut & Paste".
How to hatch this pool deck with sun chairs (blocks)? I have included an attachment ...
View 8 Replies View RelatedPresspull doesn't work. When I click in a boundry responding to the request of the "Presspull" command, nothing happends. It doesn't recognize any region, even a region of a circle.
View 1 Replies View RelatedGoal: to use Autocad 2013 or 2012 with AutoQuoterX II™ from 8020 .net.I first installed 2013 but got the error, then tried updating to latest patch. Then I tried reinstall - no fix.
I then uninstalled and tried install 2012. Updated latest patch - no fix.I am having an issue where I am getting an error message "unhandled exception"..Unable to load DLL 'sqlceme35.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) after which point I can continue and then Autocad is forced to close.
FATAL ERROR: Unhandled e0434352h ERxception at fe169e5dh..Unable to load DLL 'sqlceme35.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)
System.DllNotFoundException: Unable to load DLL 'sqlceme35.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)
at System.Data.SqlServerCe.NativeMethods.SafeRelease(IntPtr& ppUnknown)
at System.Data.SqlServerCe.SqlCeConnection.ReleaseNativeInterfaces()
at System.Data.SqlServerCe.SqlCeConnection.Dispose(Boolean disposing)
at System.Data.SqlServerCe.SqlCeConnection.Finalize()
[code]...
I have a .dwg file and when I try to save as 2010 DXF format, I get the following message:
"Unable to save to drawing c:projectslayout.dxf.
Drawing saved to c:projectssavF29D.tmp"
If I try to "save as" in DWG format with a different name in the same directory then it works. Also, there is no "savF29D.tmp" anywhere. I need the drawing DXF format.
I'm encountering disable of Delete key. Normally i use "Delete" key to erase object after it is selected. Since yesterday i can't use that key anymore. How to check the setting. I'm sure its not keybord's issue coz i can still use the key in other program(Excel & Word).
View 3 Replies View RelatedI am unable to see the dimensions that I measure using power dimensions as per the attachment on the drawings itself. If i want to see it, I have to select the green line, and right click and select the line and select standard as the dimension style. I did not have to previously do all of this.
View 1 Replies View RelatedIs there another way to turn off dynamic UCS than hitting F6. My ucs change frequently so I constantly have to change it back to world when modeling in 3d.
Is there a way to lock the UCS to world or to a saved UCS permanently. I have no useage of other UCS than world and the ones i saved.
If I get a solution on this problem
why I cannot join the various polylines in the attached example? My objective is to create 2 closed polylines, Line 1 and Line 2.
View 1 Replies View RelatedI have installed AutoCAD (Map 3D 2012) onto a users machine. When I run the software, I get a message box appear saying it cant load the profile...
I went into the registry and noticed that his registry is missing a lot of keys for Map 3D (attached)
I have attached a copy of my registry for comparison.
What would typically cause this? I have tried to delete the registry entry and let it re-configure, but i get all sorts of errors (Internal Error 2738).
I should probably mention that I am using a profile switch in the shortcut.
I can't print dwg to Adobe PDF. Printer drivers ale installed and work fine in other application. Only in AutoCAD 2012 is some problem.
View 9 Replies View RelatedI can see entire drawing in the viewport but i can not see the text. I have checked my layers too. but everything is set right in layers.
View 3 Replies View RelatedI can't seem to get images to show up in 2012. Not all images... just ones that I receive from other folks using LandDesktop 2009. They are usually images of terrain.
View 1 Replies View Related