AutoCAD 2010 :: Unable To Load DLL
Jan 30, 2013
Goal: to use Autocad 2013 or 2012 with AutoQuoterX II™ from 8020 .net.I first installed 2013 but got the error, then tried updating to latest patch. Then I tried reinstall - no fix.
I then uninstalled and tried install 2012. Updated latest patch - no fix.I am having an issue where I am getting an error message "unhandled exception"..Unable to load DLL 'sqlceme35.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) after which point I can continue and then Autocad is forced to close.
FATAL ERROR: Unhandled e0434352h ERxception at fe169e5dh..Unable to load DLL 'sqlceme35.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)
System.DllNotFoundException: Unable to load DLL 'sqlceme35.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)
at System.Data.SqlServerCe.NativeMethods.SafeRelease(IntPtr& ppUnknown)
at System.Data.SqlServerCe.SqlCeConnection.ReleaseNativeInterfaces()
at System.Data.SqlServerCe.SqlCeConnection.Dispose(Boolean disposing)
at System.Data.SqlServerCe.SqlCeConnection.Finalize()
[code]...
View 3 Replies
ADVERTISEMENT
May 1, 2012
I have installed AutoCAD (Map 3D 2012) onto a users machine. When I run the software, I get a message box appear saying it cant load the profile...
I went into the registry and noticed that his registry is missing a lot of keys for Map 3D (attached)
I have attached a copy of my registry for comparison.
What would typically cause this? I have tried to delete the registry entry and let it re-configure, but i get all sorts of errors (Internal Error 2738).
I should probably mention that I am using a profile switch in the shortcut.
View 4 Replies
View Related
Nov 27, 2012
unable to load customization file:
c:usersdantappdata
oamingautodeskautocad mechanical20152
18.2enusupportacetmain.cuix
that customization group already exists.
I have two boxes here where something seems to create a acfusion.cuix, an aliasconcept.cuix and a acetmain.cuix. If I unload them and restart, I dont get the error but the have been created. Could a startup lisp be creating these? I havent done anything with lisp files. the target in the shortcut doesnt seem to be pointing to a lisp file.
We dont need these cuix files how can I stop them from being created on start up?
Dell t1500 i7 8 gb ram
Windows 7 64 bit
ati firepro v4800
View 3 Replies
View Related
May 4, 2011
I HAVE THE SAME PROBLEM, BUT THE FIX IS NOT WORKING IN AUTOCAD 2012
View 2 Replies
View Related
Jun 4, 2013
Is it possible to use a load statement in a profile to automatically load/unload a cuix?
View 7 Replies
View Related
Aug 25, 2011
I have having difficulty getting any addins to load at the moment and am totally stumped as to what the problem is. I have even created a very simple addin from the (C#) template, compiled and registered it and it still will not load up. I get the addin to appear in the Inventor Add-ins dialog ok but it will not load for some reason. I have tried generating various .Net versions 2.0, 3.0 & 3.5 all produce the same result. I have also tried to debug the add-in by getting Visual Studio to launch Inventor but it does not even appear to be loading the add-in. I have dug out some work I did months ago and tried that but it does not work either. Is there a log in Inventor?
I am using C# in Visual Studio 2008 Pro & Inventor 2011.
View 1 Replies
View Related
Jan 15, 2013
On starting autocad, before anything else appears an error box pops up saying "Unable to load Profile file, some profile information saved in the last session may not be restored". Click to accept the message and autocad starts normally with the exception that the ribbon doesn't show -at all. The user then switches to the classic workspace and back again and the ribbon will appear as expected.
The user, I believe, has local admin rights. I've tried uninstalling and reinstalling to no avail. My next step, is a last resort, which will involve uninstalling, then using some kinda registry cleaner to erase any trace of autocad on the laptop, then reinstalling - this is a bit severe, and will require the co-operation of my own IT dept, which can be like pulling teeth. I'm wondering if there's any other, less time consuming solution to this irritating problem?
ACad, MEP, 3DS Max
Windows 7x64
X5482 @3.2Ghz 8Gb Ram
Quadro FX1700
View 9 Replies
View Related
Oct 29, 2012
I downloaded importskp plugin and installed for Autocad2013, but could not load it.
I tried to restart Autocad, and also appautoload command but couldn't solve the problem.
View 4 Replies
View Related
Sep 24, 2012
I just loaded AutoCAD 2013 and have loaded Express tools but can't access the tools.
I get a message when I open dwgs "**Express Tools** - Unable to load acetutil.arx"
In fact I can't load any .arx files.
View 9 Replies
View Related
Jun 13, 2012
I have a large scan project (Scene 5.0's new file structure) that contains a few registered workspaces (*.fws) and I would like to import at least one into AutoCAD 2013. I followed the workflow of going to Insert>Point Cloud>Create Point Cloud, and I selected the *.fws that I wanted to import (or rather have indexed into a *.PCG).
As soon as I hit 'Create' I get an error that says 'FAILURE! Fail to open scan file" and nothing happens. I can import *.fls, but they are not registered.
Does FARO not support AutoCAD 2013?
View 5 Replies
View Related
Aug 25, 2012
When trying to run this code is throws a Cannot create ActiveX object
If ac IsNothingThen
ac = CreateObject("AutoCAD.Application")
Else
ac = GetObject(,"AutoCAD.Application")
EndIf
View 2 Replies
View Related
Oct 10, 2012
I work at a place where we use autocad, everywhere... And I'm in IT and i've been struggling with this for a day now. I got 2009/2011 to work, but when i try to get 2010 to work, it just doesnt want to cooperate. Now when i used to start it up a proxy graphics thing would pop up, and i figured out how to turn that off, but then no ribbon loads.
So i go to the command line and type in ribbon, and i get an error:
"Unhandled exception has occurred in a component, in your application. if you continue, the app will ignore this error and attempt to continue. Object reference not set to an instance of an object" and here are the details..See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at Autodesk.AutoCAD.Ribbon.RibbonPaletteSet.LoadRibbon()
at Autodesk.AutoCAD.Ribbon.RibbonPaletteSet.Initialize()
at Autodesk.AutoCAD.Ribbon.RibbonServices.CreateRibbonPaletteSet()
at Autodesk.AutoCAD.Ribbon.Commands.Ribbon()
at Autodesk.AutoCAD.Runtime.CommandClass.InvokeWorker(MethodInfo mi, Object commandObject, Boolean bLispFunction)
at Autodesk.AutoCAD.Runtime.CommandClass.InvokeWorkerWithExceptionFilter(MethodInfo mi, Object commandObject, Boolean bLispFunction)
at Autodesk.AutoCAD.Runtime.CommandClass.Invoke(MethodInfo mi, Boolean bLispFunction)
at Autodesk.AutoCAD.Runtime.CommandClass.CommandThunk.Invoke()
[code]...
When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
View 2 Replies
View Related
Apr 29, 2011
I've a large number of DV AVI (Type 2) files I've edited several times using VS. But in the last couple of days X3 has stopped loading them into the project timeline. I suspect I have inadvertently deleted, or unlinked, the Type 2 codec. Strangely, the files play OK with Media Player, it's just X3 that's refusing to work! I've reinstalled X3 but that's not made any difference. How do I identify the codecs available?
View 2 Replies
View Related
Sep 9, 2013
I am no longer able to import any type of file into Revit. It doesn't matter if it is a CAD file, Image file, or a new Family. When I click the import or load button the program appears to freeze and no dialog box appears. I can hit escape and its back to normal. I tried seeing if the dialog box was hidden behind all my open programs but I can't seem to locate it anywhere.
View 1 Replies
View Related
Jun 2, 2010
I try to load AutoCAD 2010 on windows 7 but it keeps on failing Language Pack - English failed installation aborted, Result 1624 so it rolls back and doesn't install.
View 9 Replies
View Related
Feb 14, 2012
I'm trying to link excel to autocad for a time now.
and until now it didn't work for me.
Everytime it says "1 data link(s) do not allow their data to be written out."
thats when i try to write it to the excel file.
View 5 Replies
View Related
Sep 1, 2013
I have a number of dwg-drawings generated from layers in MapInfo. I need to load these drawings into separate layers to get the same layer structure as I had in Mapinfo. How do I do?
View 5 Replies
View Related
Jul 2, 2013
We have several tool palettes that I use all the time. And every time I close down AutoCAD and open it back up, all the palettes load back up in the middle of my left monitor (dual monitor set up). I typically have my AutoCAD window open on the left monitor, and my palettes on the right monitor.
I have tried to save my profile, lock all Toolbar/Palette positions.....and nothing has any affect. My palettes always load in the middle of my left monitor.
I tried loading the latest graphics drivers, no affect.
View 9 Replies
View Related
Sep 3, 2012
I bought Sketchbook Pro a few months ago for my Android 10.1 tablet, and all was well.
Recently, I updated the tablet firmware to 4.0.4 - I don't know if that's relevant.
A few days ago I noticed that Sketchbook Pro would not load sketches form the gallery. It would pasue for maybe 10 seconds then the app would go away. No screen messages.
Sketchbook Express behaves in the same way.
UIninstalling Skewthbook Pro, renaming trhe autodesk folder, rebootnig the tablet, then re-installing does not renmove the problem, so this is something which survives all of that. Perhaps a file associations problem?
I installed apps to view the system logs, and I cam see:
EditFilepath: /mnt/sdcard/Autodesk/SketchBookPro/Sketch2017935.tiff - me trying to oipen the gallery sketch.
Screen Width: 1280 Screen Height: 752
Image <2>
onCreate
[code]...
- I have not includede log lines between these which say:
[date & time] D/Sketchbook(1170) or other 4-digit numbers
In other crashes, I see a NullPointerException from Java.
If I double-tap a sketch in the gallery, then I enter the gallery browse mode OK and can flick through the sketches.
If I upload the TIFFs to my PC< they open OK.
By manually deleting some TIFFs I did get the app to open a sketch of two briefly, but that stopped working within a minute or so, and has not worked since.
I have written to the support email given in the Market but been ignored by Autodesk.
View 5 Replies
View Related
Jan 25, 2012
I had a problem where AutoCAD would not load a drawing - it kept crashing. However, after selecting "F2" and reviewing the display window - I received the following message:
Unhandled exception has occurred in a component in your application. If you click Continue, the application will ignore this error and attempt to continue.
Invalid URI: The format of the URI could not be determined.
Sample Entry:
Resolve Xref "02.01.01.13": Z:EngineeringApproved Shop Drawings�0 CELL FILES�2.01.01.13.dwg
"02.01.01.13" loaded.
"02.01.01.13" reference file may have changed since host drawing was last saved.
It was only after the "Continue" option was present that I could open the drawing.
View 1 Replies
View Related
Sep 30, 2013
etransmit is not working, error says "Failed to load transmittal component: incorrect registry entry." ... googling this error, as enjoyable as it is, leads nowhere other than to "repair/reinstall Autocad" which I would do if I COULD FIND MY INSTALLATION DISK! which I cannot ...
is there any other command or way to achieve the same end result as the command etransmit? a clue as to why this is happening is that i had to uninstall civil 3d 2012 from this machine and that's when this started ...
View 9 Replies
View Related
Aug 24, 2011
For some reason I cant get my lisp files to automatically load. im doing the same thing i did in other versions, but i have to constantly tell them to load when i want to use one.
I have them in the search path, i have them set to load with every drawing in options, what am i missing?
View 9 Replies
View Related
Feb 10, 2012
Have developed a problem trying to load some TIF images into Photoshop. I have a large number of images archived over a decade or more. At this point it may some of the older files that exhibit the problem.
Now all these files were edited and stored using the Photoshop versions during the complete time period. The files are always saved with no compression. Have tried to load from Photoshop and clicking on the file in a file list. Photoshop just hangs and I get the message Program not responding. I can take these same files and load them into the ROXIO photo editor with no problem. Stranger yet is if I simply load the file into the ROXIO editor then "save as" back into the same folder (overwrite) the file can then be brought into Photoshop with no problem!
View 15 Replies
View Related
Jun 20, 2012
I am using Photoshop cs5 extended on windows 7, Unable to load camera raw images into photoshop directly or via adobe bridge. I download all the Camera Raw file ready, but still not working..I open my CS 5 Extended and open with the CR2 file, it pop out "Could Not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera Raw,
I current using Canon 600D .
View 4 Replies
View Related
Nov 23, 2012
I first tried capturing the video from a Sony camcorder but VS keeps freezng up on "change field order". So then I just downloaded the files to my computer and tried to load them that way. But the program does not see MTS files in the folder.
View 4 Replies
View Related
Dec 10, 2013
I've just installed PSPx6, downloaded and installed updates. I'm using the 64 bit version and it will not load any plug-ins. I've set the file locations etc.
I've been using PSP since version 7, so I'm pretty capable. This is really making me angry though. It's a useless program to me if it won't utilize my Dreamsuite, KPT, Filters Unlimited, Plaid lite, and Muras copies.
View 6 Replies
View Related
Nov 29, 2008
I'm trying to load an ink splatter brush set from brusheezy.
The extension is *.abr
When I select load brushes and pick the file nothing happens. I'm not asked to replace or append and my brush palette remains the same.
Any ideas on what the problem may be?
View 2 Replies
View Related
Oct 6, 2003
When I start-up Photoshop 6 I get the following message: Unable to load Photoshop's interface font. Instead, using a substitute font. We strongly suggest that you reboot the system and launch photoshop again, I did, it doesn't help.
View 2 Replies
View Related
Aug 29, 2012
I was not able to load the program due to a limited space on my C drive, the program would not allow mew to change to anoither drive event thought it says select another drive, now it states that the program is in the process of loading even though I've rebooted twice.
View 2 Replies
View Related
Sep 29, 2013
I am unable to access correctly loaded RGB printer profiles in Lightroom 5. In the print module when color management profile "Other" is selected no loaded profiles appear; and Lightroom usually freezes. Using Photoshop v6 on same computer I can access all loaded printer profiles. I have reloaded LR5.
View 7 Replies
View Related
Jun 2, 2012
I installed AutoCAD 2012 on a 32 bit windows 7 workstation but I received an error message."Cannot find acad.cuix customizastion file".I tried repairing the installation but it couldnt..I tried unistalling but won't uninstall..The machine was running previous versions of AutoCAD.
View 3 Replies
View Related
