When I start-up Photoshop 6 I get the following message: Unable to load Photoshop's interface font. Instead, using a substitute font. We strongly suggest that you reboot the system and launch photoshop again, I did, it doesn't help.
View 2 Replies
Does the font interface in Photoshop show big enough in Windows 7?
I purchasde a new Pc with Windows 8, and the Photoshop and Bridge Interface is not readable, it is miniscule, Adobe, Microsoft and DEll cannot fix problem. So I am returning my PC, and need to purchase a new one, if the font is big enough, say size 12 or 14 (normal size) on window 7?
PSE 11 is out and i have downloaded the trial.
Is there the option to change the UI font in PSE 11 - i can not find an option, despite this UI problem being around for at least PSE 10 and PSE 9......
If no UI option in PSE11 - WHY?
I installed AutoCAD 2012 on a 32 bit windows 7 workstation but I received an error message."Cannot find acad.cuix customizastion file".I tried repairing the installation but it couldnt..I tried unistalling but won't uninstall..The machine was running previous versions of AutoCAD.
View 3 Replies View RelatedIs there any way to increase the interface font size? I'm getting eye stain.
View 6 Replies View Related(I'm using Windows XP.)
All of the sudden, GIMP is now using the old style of fonts and interface, and I don't know why. The only thing that I can imagine might have caused it is that I just downloaded Synfiq and that used a similar interface. However, to test that theory, I just deleted Synfiq from my computer, but my GIMP interface is still in the old style.
I guess it's not a huge deal because (as far as I can tell) the change hasn't affected functionality.
I find the default interface in CS6 difficult to read as the menu/tool labels seem very small to me. I can manipulate via Windows, but then the fonts in the windows of all my other apps are too big.
Is there a way to change the size of the fonts in labels in the user interface within Illustrator itself? I thought there used to be a way in preferences some where, but that was a long time ago - maybe even pre-CS?
i don't know how to load up a new font for a project.
View 3 Replies View RelatedI am constantly forced to reinstall frutiger for it to show up in the Photoshop list after each time i restart the computer...What's going on!? I ran the font checked script from the adobe help site and it didn't find any corrupt fonts or anything.
The font was bought from linotype.
Most of the designs require some unique font to get the desired effect. Most likely, we'd search the web for one, download it, use it and discard it. We don't wanna keep all these single-use fonts installed. It would be great if we can load a font in to PDN by just browsing for it using a file dialog. I think Photoshop lets you drag and drop a font to its main window and till let you use it for that session. When you exit the application, the font is unloaded.
Can this be supported? Of course, there is a workaround: Use a font manager app. But, I think it's a pretty good feature to have in a image editor never the less
I have a Mac on 10.7 running cs6 Illustrator. I have been able to load fonts into Font Book but when opening the document I get the error below. This is only happening on one mac out of 6 that use this font. I have tried fixing permissions and clearing the font cash.
View 10 Replies View RelatedHave developed a problem trying to load some TIF images into Photoshop. I have a large number of images archived over a decade or more. At this point it may some of the older files that exhibit the problem.
Now all these files were edited and stored using the Photoshop versions during the complete time period. The files are always saved with no compression. Have tried to load from Photoshop and clicking on the file in a file list. Photoshop just hangs and I get the message Program not responding. I can take these same files and load them into the ROXIO photo editor with no problem. Stranger yet is if I simply load the file into the ROXIO editor then "save as" back into the same folder (overwrite) the file can then be brought into Photoshop with no problem!
I am using Photoshop cs5 extended on windows 7, Unable to load camera raw images into photoshop directly or via adobe bridge. I download all the Camera Raw file ready, but still not working..I open my CS 5 Extended and open with the CR2 file, it pop out "Could Not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera Raw,
I current using Canon 600D .
I'm trying to load an ink splatter brush set from brusheezy.
The extension is *.abr
When I select load brushes and pick the file nothing happens. I'm not asked to replace or append and my brush palette remains the same.
Any ideas on what the problem may be?
I was not able to load the program due to a limited space on my C drive, the program would not allow mew to change to anoither drive event thought it says select another drive, now it states that the program is in the process of loading even though I've rebooted twice.
View 2 Replies View RelatedI use Photoshop CS5 on i Mac 3.06GHz IC2D with Lion 10.7.2. When I start Photoshop a Popup says : Could not load the Bigger Tiles Modules because it does not work with this version of Photoshop. but how to disable this Popup at every start ?
View 13 Replies View Relatedunable to load photos into PSE 6 (Mac) from camera or HD.
View 1 Replies View RelatedI have installed some new fonts in my windows font folder, but they are not showing up in illustrator. I am using a cloud version of illustrator and have tried closing and restarting to no avail.
View 2 Replies View Relatedunable to load RAW images to Photoshop elements 10 / tells me that the file type is not supported.
View 8 Replies View RelatedMY photoshop was working fine up until a week ago. Then get gave me this error message. "Unable to continue because of hardware or system error. Sorry, but this error is unrecoverable". The error pops up when photoshop is loading "building color convertion tables" or something to that effect. It is not the fonts becuase I have not installed any new fonts, have defraged my hardrive. I have used FontDoctor, and all my fonts are fine. The only thing that i did do is install the new directx june 2006, and the new NVIDIA drivers. I uninstalled my Nvidia drivers but problem still persists, please I am desparate for help, formating my hard drive is not an option. I have reset the prefs both via ctrl, atl and shift, and searching for the psp file and deleting it manually, same problem pops up. I installed Photoshop cs and I recieve the same error message. I can however run and use ImageReady.
View 1 Replies View RelatedI've a large number of DV AVI (Type 2) files I've edited several times using VS. But in the last couple of days X3 has stopped loading them into the project timeline. I suspect I have inadvertently deleted, or unlinked, the Type 2 codec. Strangely, the files play OK with Media Player, it's just X3 that's refusing to work! I've reinstalled X3 but that's not made any difference. How do I identify the codecs available?
View 2 Replies View RelatedGoal: to use Autocad 2013 or 2012 with AutoQuoterX II™ from 8020 .net.I first installed 2013 but got the error, then tried updating to latest patch. Then I tried reinstall - no fix.
I then uninstalled and tried install 2012. Updated latest patch - no fix.I am having an issue where I am getting an error message "unhandled exception"..Unable to load DLL 'sqlceme35.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) after which point I can continue and then Autocad is forced to close.
FATAL ERROR: Unhandled e0434352h ERxception at fe169e5dh..Unable to load DLL 'sqlceme35.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)
System.DllNotFoundException: Unable to load DLL 'sqlceme35.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)
at System.Data.SqlServerCe.NativeMethods.SafeRelease(IntPtr& ppUnknown)
at System.Data.SqlServerCe.SqlCeConnection.ReleaseNativeInterfaces()
at System.Data.SqlServerCe.SqlCeConnection.Dispose(Boolean disposing)
at System.Data.SqlServerCe.SqlCeConnection.Finalize()
[code]...
I am no longer able to import any type of file into Revit. It doesn't matter if it is a CAD file, Image file, or a new Family. When I click the import or load button the program appears to freeze and no dialog box appears. I can hit escape and its back to normal. I tried seeing if the dialog box was hidden behind all my open programs but I can't seem to locate it anywhere.
View 1 Replies View RelatedHow can I draw a straight line without that protractor shaped dotted line following my cursor making it lag and also not snap correctly to the next line? Also, I have noticed that I can't set my user interface to auto cad classic settings. There seems to be no option for it in workspace settings.
View 3 Replies View RelatedI first tried capturing the video from a Sony camcorder but VS keeps freezng up on "change field order". So then I just downloaded the files to my computer and tried to load them that way. But the program does not see MTS files in the folder.
View 4 Replies View RelatedI've just installed PSPx6, downloaded and installed updates. I'm using the 64 bit version and it will not load any plug-ins. I've set the file locations etc.
I've been using PSP since version 7, so I'm pretty capable. This is really making me angry though. It's a useless program to me if it won't utilize my Dreamsuite, KPT, Filters Unlimited, Plaid lite, and Muras copies.
I have having difficulty getting any addins to load at the moment and am totally stumped as to what the problem is. I have even created a very simple addin from the (C#) template, compiled and registered it and it still will not load up. I get the addin to appear in the Inventor Add-ins dialog ok but it will not load for some reason. I have tried generating various .Net versions 2.0, 3.0 & 3.5 all produce the same result. I have also tried to debug the add-in by getting Visual Studio to launch Inventor but it does not even appear to be loading the add-in. I have dug out some work I did months ago and tried that but it does not work either. Is there a log in Inventor?
I am using C# in Visual Studio 2008 Pro & Inventor 2011.
I have installed AutoCAD (Map 3D 2012) onto a users machine. When I run the software, I get a message box appear saying it cant load the profile...
I went into the registry and noticed that his registry is missing a lot of keys for Map 3D (attached)
I have attached a copy of my registry for comparison.
What would typically cause this? I have tried to delete the registry entry and let it re-configure, but i get all sorts of errors (Internal Error 2738).
I should probably mention that I am using a profile switch in the shortcut.
I am unable to access correctly loaded RGB printer profiles in Lightroom 5. In the print module when color management profile "Other" is selected no loaded profiles appear; and Lightroom usually freezes. Using Photoshop v6 on same computer I can access all loaded printer profiles. I have reloaded LR5.
View 7 Replies View RelatedI've recently changed from another program to Elements 11. When applying a watermark, whether I set the font to 8 or 72, it appears microscopic on the photo (must zoom to see if its there). I've tried watermarking via adding text and via the "Process Multiple Files" applications with the same result. (The opacity is fine.) I don't know if there's a hidden setting someplace I need to change or if this is ann Adobe defect. Since I've recently uploaded the program, am resistent to having to pay for Adobe tech support!
View 1 Replies View RelatedOn starting autocad, before anything else appears an error box pops up saying "Unable to load Profile file, some profile information saved in the last session may not be restored". Click to accept the message and autocad starts normally with the exception that the ribbon doesn't show -at all. The user then switches to the classic workspace and back again and the ribbon will appear as expected.
The user, I believe, has local admin rights. I've tried uninstalling and reinstalling to no avail. My next step, is a last resort, which will involve uninstalling, then using some kinda registry cleaner to erase any trace of autocad on the laptop, then reinstalling - this is a bit severe, and will require the co-operation of my own IT dept, which can be like pulling teeth. I'm wondering if there's any other, less time consuming solution to this irritating problem?
ACad, MEP, 3DS Max
Windows 7x64
X5482 @3.2Ghz 8Gb Ram
Quadro FX1700
