I've drawn a 3d object by revolving a 2d surface. the problem is, if i draw a box and want to presspull an area on any of its surface i can draw draw the area on that surface, but when i try to draw the area to be presspulled on the 3d object that was drawn by revolving it doesnot come on the desired surface, rather it comes on the X-Y plane.
View 9 RepliesI am semi-new to AutoCAD but have a fairly good knowledge of how to work the program now. However, I am continuously having problems with the presspull command. When I try to use the command on an object, the object is raised but not filled. It looks sort of like a fence/outline around the border of the object with a grid pattern.
View 9 Replies View RelatedI have a revolved half circle and mapped a rectangle around it to form a spherical ribbon. Whenever I resize it, it looks different. How do I get it to stay the way it looks without losing resolution?
View 4 Replies View RelatedPresspull doesn't work. When I click in a boundry responding to the request of the "Presspull" command, nothing happends. It doesn't recognize any region, even a region of a circle.
View 1 Replies View RelatedI have drawn a plan of a house. I used the presspull command to lift the exterior walls 3m. The problem I am facing is when I attempt to lift the internal walls, there is a grid pattern that forms, whereas no pattern has appeared on the external.
I have looked through properties but I can't seem to change the pattern. I am using AutoCAD 2014.
The problem I'm having is presspull/extrude irregular shapes.
I have some really weird, irregular shapes that's consisted of fillets, lines, and arcs. For some reason I cannot REGION it. But I can HATCH it, and give it a solid inner part.
My irregular after being filled, can't be extruded. When I try extruding it, the command line goes "This kind of shape cannot be extruded", without any explanation, or keywords.
Then, if I try to PressPull, it only PressPull the outline of the irregular shape, without pulling out the inner bulk part.
Then if I try to do anything more, my AutoCad likes to go "About to regen -- proceed?" error.
Are there any switches or settings needed to activate, the object boundaries when using the PRESSPULL command in autocad ver 2009?
View 5 Replies View RelatedI am using AutoCAD 2013. During the creation of 3D while I am using Presspull Command, it works fine in the beginning after some time, AutoCAD seems to be hang while I took the command but once I press Esc, AutoCAD continue working.
View 2 Replies View RelatedLooking for example macro that can create a new sketch, add a few lines and arcs, Then revolve the sketch around an axis to create a solid part. For example a shaft?
View 2 Replies View RelatedI have a 2D drawing that I used presspull to give the correct depth to. Now I have to make modifications to it that are angular to the presspull direction and am not sure that presspull is the correct way to do it. I've searched around for vids and have looked at quite a few, but am stumped. Don't know if I need to change the orientation so that the angle I want to cut is the direction for presspull or if I am simply looking at the problem wrong. If I knew how to take a screenshot, I would post some so that it would be clear how inept I am.
View 6 Replies View RelatedSo I am trying to create a lampshade that has holes in it for leds along the wall thickness. This lampshade only needs to be a few inches, but I am having problems cutting holes inside the lampshade, and then revolving them to make multiple holes.
View 4 Replies View RelatedI have a model that has been made up from a revolved sketch and then had loads of bits done to it etc.. Basically it is a tapered ring with a fillet on the top edge, I need a top face dxf export for profiling and to do this I need to remove the radius on the edge, but because it is a revolved sketch and it is not filleted it is not so easy to do with other references involved.
Is there a way I can temporally rebuild the edge to remove the fillet, I tried in fusion but it won't allow a Zero fillet edge?
I can't upload the sketch to show you unfortunately.
I'm really struggling with constraining a weldment assembly. I've attached a JPG of the Assembly but I cant get the constrains to go where I want them.
Basically this assembly is a wheel with three equally spaced stays welded to a large nut hub. I have constrained the center axis of the wheel to the center axis of the Nut so the wheel and nut will remain aligned.
What I'm struggling with is constraining the three stays to the wheel and to the nut equally spaced around the nut.
Is it possible to apply a tangent constraint to an edge of a cylinder at an angle to the revolved side of another cylinder? I wan't to avoid applying a specific angle constraint if at all possible.
View 3 Replies View RelatedI have created a Hollow Cylinder using Polysoild (Object Option). I want to drill holes(array) on the cylinder.
View 9 Replies View RelatedI have 2 sheet metal parts, both have been revolved using an angle of 359.9deg so there is a small gap to weld. in the assembly I copied one as a surface onto the other part and I want to scuplt it at the intersection of the two.
The problem I've come to is that the small gap in the surface is preventing me from deleteing the upper part of the cut, how can I make the surface a whole so there is no gap in the cut?
I'm playing around with a part that I'd like to "decorate" with embossed features or perhaps even cut-outs. The actual part, before adornments, looks like a funnel. As sketched now, I'm revolving a spline and then creating a thickened solid feature. I suppose that the variable diameter and varying cross sectional radius of my part increases the level of complexity of this task over a part that looks more like a regular cylinder. I'm hoping to learn a tecnique that will work for revolved parts with highly irregular profiles - not just plain ole cylinders.
So, what I'd like to do is emboss (negative or positive) and/or thru-cut decorative geometric or vine/flower inspired patterns into the outside face of a funnel-like part. (Pic attached.) I'm picturing some sort of pattern that might repeat around the part. (The variable diameter probably really complicates matters here.) I haven't put much effort/experimentation into this yet - pretty much because I'm a loss about where to even start.
Is there a way to use PRESSPULL on a face that's behind or underneath another face. When I use PRESSPULL it always selects the face on top and sometimes I want a face that is behind or underneath that face.
View 3 Replies View RelatedI have a rather simple 3rd party custom object... I tried to get its bounding box but the coordinates that come back don't seem to relate at all to the object.
What I'd like are the coordinates of two nodes the object contains...
Is it possible to apply the autocad cursor in some why with the node object snap to get their coordinates?
I've already started using the AutoCad 3D.
how to put a 3D object on top of the another 3D object in autocad"! E.g.,I want to put a 3d object of one leaf (raised 1") on top of the vase, so that the edges of the leaf are placed completely on the surface of the vase.
I extruded the leaf 1" first, then tried to copy it on a solid cylinder of a vase, but it didn't work!!! It seems to be simple, maybe not!
Is it possible to select an object for reading in an XRef?
PS I think it has something to do with Editor.SelectNestedEntity() but it is the end of a long day and I can't fathom it out
When I select an object and pan to make another selection the first object "deselects". The object(s) will stay selected until I pan and as soon as I start to pan the grips go away and the object(s) is deselected.
View 9 Replies View RelatedHow do I keep the fill ON the object that gets selected so I know not to pick it again as move through the drawing?
How /or/ where can I get a listing of my SetVars.
Running the Setvar (?) command doesnt offer a description for each?
We upgraded to AutoCAD Mechanical 2012 (from AutoCAD Mechanical 2009).
I used to go: TOOLS > DRAWING ORDER, in order to bring an object to the back or the front of another object.
Now that we are using AM 2012, I can't find where this command is located.
I get the following exception message while debugging, after pasting VBA code into my vb.net project:
"Object reference not set to an instance of an object"
Without going to specifics yet, I commented-out ObjectCollections and the error happened further down in the class.
Is there a different way ObjectCollections are handled in a vb.net class, versus a VBA module?
I want to Make Polyline object instead of Line object. How to change the object?
View 1 Replies View RelatedI'm making a surface out of contours. The problem is the contours have the elevation listed under object information, not geometry (the contours were brought in from a GIS file, which I do not have access to, or I would bring them in again with the elevations properly assigned, this is not an option). How can I quickly change the geometry elevation property to match the miscellaneous property?
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
I'm trying to cut through the angled object on the underside of the curved object to cut it into 2 sections and remove the upper, so that I'm left with the upper curved deck covering the front object.
I've tried Slice and Separate and Subtract but I can't get what I want.
I've just changed a VS compile options to use .NET Framework 3.5 (previously Framework 4).
My user controls that I've added as containers for the pallette don't seem to agree with it and I get a "Object reference not set to an instance of an object" error on each of their resx files. And one on Resources.resx.
Attached is a screenshot.
Is there anything I can do to fix this?
So picture the workspace....
A flat image is draw, it is a long rectangle (632x50). Is it possible for this object to be 'wrapped' so that it creates a 3D object?
I am designing an item to be made, a one of. I am printing this, backing it with card and wrapping it to create a model. I want to know if this can be done virtually so that it may be added to the printed sheet when it is handed over to the craftsperson for production.
Can I unfold a 3d object to get a 2d object. Example" If i have a cone with the top chopped off, can i get the 2d plan view unwrapped in this software ?
View 1 Replies View Related