I get the following exception message while debugging, after pasting VBA code into my vb.net project:
"Object reference not set to an instance of an object"
Without going to specifics yet, I commented-out ObjectCollections and the error happened further down in the class.
Is there a different way ObjectCollections are handled in a vb.net class, versus a VBA module?
I've just changed a VS compile options to use .NET Framework 3.5 (previously Framework 4).
My user controls that I've added as containers for the pallette don't seem to agree with it and I get a "Object reference not set to an instance of an object" error on each of their resx files. And one on Resources.resx.
Attached is a screenshot.
Is there anything I can do to fix this?
I'm getting a "NullReferenceException. Object reference not set to an instance of an object" using:
For Each SetEntry As DBDictionaryEntry In SetRootDict Dim SetEntryDict As DBDictionary = CType(SetEntry.Value.GetObject(OpenMode.ForRead), DBDictionary) Next
I have the same lines letter for letter in a different procedure and referring the same unchanged root dictionary where it works fine.
I got a simple question about the creation of copies of an object. Is it possible to have the objects in the mirroring of an object change with the object used as reference for mirroring?
If there is no function to do this directly is there a way to do it via Ilogics to update the mirrored objects? If possible even by deleting and creating a new the mirroring yet not manually but by i logic?
- 2500K @ 4.2Ghz- 8GB - Radeon7970 -
- Xeon 1230V2 @ stock Ghz- 32GB - Quadro 2000 -
I have created a block which contains various part numbers, with a description and some other bla bla, with a total number box, I issue this to clients to make the specification of product much easier. My idea was for people to use the quick select command to find how many instances there is of an object within the drawing.
As this is a slightly tedious process, as you have to physically type the part number then mentally take one instance off as it counts the number in the legend block as well.
Is there an addition/summary of object instances command I could use to make this process more dynamic and straightforward for the recipient/user of the block I issue?
I derived in a part and I am trying to use a sketch from it in my new part.
I am trying to revolve my sketch and when I do I get this error.
I am using a English version, and I cant read chinese at all. Design doctor shows no errors, but this will not revolve. Tried Extruding and get the same error. When I try to revolve, it shows a preview of my part correctly, but when I click apply in the revolve dialog, that is when I get this error.
The files are attached and here is a video of my steps. In the zip file, the -M8.ipt needs the EOF marker moved all the way to the bottom.
Windows 7 x64 -12 GB Ram
Intel i7-930 @ 3.60ghz
nVidia GTS 250 -1GB (Driver 301.42)
INV Pro R2013, SP1.1
Vault Basic 2013
I wondered if there is a way of changing view reference from one object to another.
Example.
I have two similar models but drawing done for one.
I could save it as with a different name and replace in all the views referenciing from old model to new one.
Possible?
Can I unfold a 3d object to get a 2d object. Example" If i have a cone with the top chopped off, can i get the 2d plan view unwrapped in this software ?
View 1 Replies View RelatedUsing C3d 2013. I am looking for a way to place the deflection angle of the PI of an Alignment in the label of a structure part that references said alignment. But PIs aren't an option when I select Reference Text type. Common sense tells me it would be under Alignments, but none of the PI data is an option of the Contents' Text Component Editor. I couldn't find it under any of the other Reference Text types either. I can pull the station value from the referenced alignment, is there a way to get it to tell me the deflection angle at the PI it sits on? Or even the difference in the instantaneous direction just before and just after the part?
I know listing the deflection angle of a PI is possible, as I have seen it in several examples of labeling alignments. I just want to place it in the label of other objects.who can tell me how to display LT (to represent left) and RT (to represent right) when the deflection is positive or negative respectively.
How can i do referential scaling, like scaling an object with reference to another? see the video. open in new tab or click on it too see the video.
View 12 Replies View RelatedWhen we select an art object in Illustrator we can get the (x,y) position and the size of the selected object in the control bar.
At the left of the x value, there is something called reference point. We have nine possible choices. (bottom-left, bottom, bottom-right, left, centre, right, top-left, top, top-right). Its name seems to be the reference point (from the tooltip).
Is it possible to retrieve the current choice of the user ?
I have an object that when scanned in was not straight. I would like to draw a reference line that is drawn across the object that I know is horizontal in the artwork. I then want the object rotate to that line. Is that possible?
View 14 Replies View Relatedis there any way to align a extrude solid object as per angle reference line?
View 5 Replies View RelatedI have a square object I want to rotate in Illustrator CS6. The object wants to rotate from the center. I want to rotate it from one of the corners. How do I change the reference point from which to rotate around?
View 7 Replies View RelatedHow can I snap the center of an arbitrary symmetrical object to the grid? For instance the center of a circle or rectangle. According to this discusssion it's not possible: [URL]
How can I define a reference point in an arbitrary object or in a group of objects and snap this to the grid?
I have keyframed some ojects. I then set up a camera projection texture at keyframe 179
Is it possible to create a Texture Reference Object from keyframe 179 so this texture will stick to the geometry throughout the sequence?
I try to wire the length parameter of a taper object to the local Y-Position values of another object. It works fine until I reload the file. I get an MAXScript Wire Controller Exception error:
--Runtime error: Illegal self-reference in controller script
...and the parameter-wire dialog opens. The desired functionality returns by clicking the Update Button and everything works fine again.
I have a rather simple 3rd party custom object... I tried to get its bounding box but the coordinates that come back don't seem to relate at all to the object.
What I'd like are the coordinates of two nodes the object contains...
Is it possible to apply the autocad cursor in some why with the node object snap to get their coordinates?
I've already started using the AutoCad 3D.
how to put a 3D object on top of the another 3D object in autocad"! E.g.,I want to put a 3d object of one leaf (raised 1") on top of the vase, so that the edges of the leaf are placed completely on the surface of the vase.
I extruded the leaf 1" first, then tried to copy it on a solid cylinder of a vase, but it didn't work!!! It seems to be simple, maybe not!
Is it possible to select an object for reading in an XRef?
PS I think it has something to do with Editor.SelectNestedEntity() but it is the end of a long day and I can't fathom it out
When I select an object and pan to make another selection the first object "deselects". The object(s) will stay selected until I pan and as soon as I start to pan the grips go away and the object(s) is deselected.
View 9 Replies View RelatedHow do I keep the fill ON the object that gets selected so I know not to pick it again as move through the drawing?
How /or/ where can I get a listing of my SetVars.
Running the Setvar (?) command doesnt offer a description for each?
We upgraded to AutoCAD Mechanical 2012 (from AutoCAD Mechanical 2009).
I used to go: TOOLS > DRAWING ORDER, in order to bring an object to the back or the front of another object.
Now that we are using AM 2012, I can't find where this command is located.
I want to Make Polyline object instead of Line object. How to change the object?
View 1 Replies View RelatedI'm making a surface out of contours. The problem is the contours have the elevation listed under object information, not geometry (the contours were brought in from a GIS file, which I do not have access to, or I would bring them in again with the elevations properly assigned, this is not an option). How can I quickly change the geometry elevation property to match the miscellaneous property?
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
I'm trying to cut through the angled object on the underside of the curved object to cut it into 2 sections and remove the upper, so that I'm left with the upper curved deck covering the front object.
I've tried Slice and Separate and Subtract but I can't get what I want.
So picture the workspace....
A flat image is draw, it is a long rectangle (632x50). Is it possible for this object to be 'wrapped' so that it creates a 3D object?
I am designing an item to be made, a one of. I am printing this, backing it with card and wrapping it to create a model. I want to know if this can be done virtually so that it may be added to the printed sheet when it is handed over to the craftsperson for production.
Sometimes when I drag a new symbol instance to my artboard and resize it, the instance looses it alignement with the pixel grid.
This happens despite the fact that...
I checked the box for pixel grid alignement when I created the documentthe symbol option is set for align to pixel gridthe original shape in the symbol is aligned to pixel grindthe original shape has the align to pixel grid check box in the transform panel checked
So why when I resize the symbol instance does it break the pixel grid alignmnet and result in a blurred 1px stroke?
Resizing objects is a mess in CorelDRAW X6 when objects are outlined with Scale With Object enabled to retain proportions after resizing.
None of the tools dealing with outlines (e.g. Contour or even Outline itself) continue to work properly after resizing the object.
I strongly suggest to recalculate outline property values after resizing if Scale With Object is checked. Don't just do it hidden somewhere internally in the object model by applying a temporary scaling factor. Instead actually recalculate the actual property values if Scale With Object is checked.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
have to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object
View 2 Replies View RelatedI'm want to drag an objects anchor and have the position co-ordinates offset by opposite amounts so it doesn't appear to move postioin on screen. IS there a tool for that?
View 3 Replies View Related