I'm getting a "NullReferenceException. Object reference not set to an instance of an object" using:
For Each SetEntry As DBDictionaryEntry In SetRootDict Dim SetEntryDict As DBDictionary = CType(SetEntry.Value.GetObject(OpenMode.ForRead), DBDictionary) Next
I have the same lines letter for letter in a different procedure and referring the same unchanged root dictionary where it works fine.
I get the following exception message while debugging, after pasting VBA code into my vb.net project:
"Object reference not set to an instance of an object"
Without going to specifics yet, I commented-out ObjectCollections and the error happened further down in the class.
Is there a different way ObjectCollections are handled in a vb.net class, versus a VBA module?
I've just changed a VS compile options to use .NET Framework 3.5 (previously Framework 4).
My user controls that I've added as containers for the pallette don't seem to agree with it and I get a "Object reference not set to an instance of an object" error on each of their resx files. And one on Resources.resx.
Attached is a screenshot.
Is there anything I can do to fix this?
I have created a block which contains various part numbers, with a description and some other bla bla, with a total number box, I issue this to clients to make the specification of product much easier. My idea was for people to use the quick select command to find how many instances there is of an object within the drawing.
As this is a slightly tedious process, as you have to physically type the part number then mentally take one instance off as it counts the number in the legend block as well.
Is there an addition/summary of object instances command I could use to make this process more dynamic and straightforward for the recipient/user of the block I issue?
Sometimes when I drag a new symbol instance to my artboard and resize it, the instance looses it alignement with the pixel grid.
This happens despite the fact that...
I checked the box for pixel grid alignement when I created the documentthe symbol option is set for align to pixel gridthe original shape in the symbol is aligned to pixel grindthe original shape has the align to pixel grid check box in the transform panel checked
So why when I resize the symbol instance does it break the pixel grid alignmnet and result in a blurred 1px stroke?
I got a simple question about the creation of copies of an object. Is it possible to have the objects in the mirroring of an object change with the object used as reference for mirroring?
If there is no function to do this directly is there a way to do it via Ilogics to update the mirrored objects? If possible even by deleting and creating a new the mirroring yet not manually but by i logic?
- 2500K @ 4.2Ghz- 8GB - Radeon7970 -
- Xeon 1230V2 @ stock Ghz- 32GB - Quadro 2000 -
I derived in a part and I am trying to use a sketch from it in my new part.
I am trying to revolve my sketch and when I do I get this error.
I am using a English version, and I cant read chinese at all. Design doctor shows no errors, but this will not revolve. Tried Extruding and get the same error. When I try to revolve, it shows a preview of my part correctly, but when I click apply in the revolve dialog, that is when I get this error.
The files are attached and here is a video of my steps. In the zip file, the -M8.ipt needs the EOF marker moved all the way to the bottom.
Windows 7 x64 -12 GB Ram
Intel i7-930 @ 3.60ghz
nVidia GTS 250 -1GB (Driver 301.42)
INV Pro R2013, SP1.1
Vault Basic 2013
I wondered if there is a way of changing view reference from one object to another.
Example.
I have two similar models but drawing done for one.
I could save it as with a different name and replace in all the views referenciing from old model to new one.
Possible?
Using C3d 2013. I am looking for a way to place the deflection angle of the PI of an Alignment in the label of a structure part that references said alignment. But PIs aren't an option when I select Reference Text type. Common sense tells me it would be under Alignments, but none of the PI data is an option of the Contents' Text Component Editor. I couldn't find it under any of the other Reference Text types either. I can pull the station value from the referenced alignment, is there a way to get it to tell me the deflection angle at the PI it sits on? Or even the difference in the instantaneous direction just before and just after the part?
I know listing the deflection angle of a PI is possible, as I have seen it in several examples of labeling alignments. I just want to place it in the label of other objects.who can tell me how to display LT (to represent left) and RT (to represent right) when the deflection is positive or negative respectively.
How can i do referential scaling, like scaling an object with reference to another? see the video. open in new tab or click on it too see the video.
View 12 Replies View RelatedWhen we select an art object in Illustrator we can get the (x,y) position and the size of the selected object in the control bar.
At the left of the x value, there is something called reference point. We have nine possible choices. (bottom-left, bottom, bottom-right, left, centre, right, top-left, top, top-right). Its name seems to be the reference point (from the tooltip).
Is it possible to retrieve the current choice of the user ?
I have an object that when scanned in was not straight. I would like to draw a reference line that is drawn across the object that I know is horizontal in the artwork. I then want the object rotate to that line. Is that possible?
View 14 Replies View Relatedis there any way to align a extrude solid object as per angle reference line?
View 5 Replies View RelatedI have a square object I want to rotate in Illustrator CS6. The object wants to rotate from the center. I want to rotate it from one of the corners. How do I change the reference point from which to rotate around?
View 7 Replies View RelatedHow can I snap the center of an arbitrary symmetrical object to the grid? For instance the center of a circle or rectangle. According to this discusssion it's not possible: [URL]
How can I define a reference point in an arbitrary object or in a group of objects and snap this to the grid?
I have keyframed some ojects. I then set up a camera projection texture at keyframe 179
Is it possible to create a Texture Reference Object from keyframe 179 so this texture will stick to the geometry throughout the sequence?
I have structures and alignments data referenced. If I assign the structures ref alignments in the dwg with the data refs for labeling, the next time I open the dwg the ref alignments are set back to none, causing the labels to be ?
It seems like this worked in the past?
I'm working on a large infrastructure project with numerous of drawings. On quite a few layout drawings I need to have the same base set of references, however I need to change the layer settings (colors, lineweight etc.). This cannot be done in the base reference itself as it is used by others. As the layouts I work with includes other references as well, it is time consuming to filter and change layer settings on each base reference.
My concept is to have a master reference file to manage all layer settings and add/remove base references. When the master reference is referenced into the layout, all layer settings on the base references should stay as set in the master reference. In this way I can easily control all base references with one file and make sure all changes will be the same for all the layouts.
New illustration of concept:
I am getting this error in my production drawings.
My setup is as follows:
- EG.dwg has my existing surface in it. I create a data reference to use it in other drawings.
- Level One.dwg has the EG surface data referenced in, and I use this to create alignments, profiles, and finish surface. All of these are turned in to data references.
- Storm Sanitary.dwg has my pipe designs. I data reference in the two surfaces, profiles, and alignments, and create pipe networks. I create references for these networks.
- Plan Profile.dwg is the production sheet I'm getting this error from. Every one of my civil objects is data referenced in to this drawing. Everything is inserted correctly, the pipes show correct FG surface elevations for their rims, etc.
BUT when I open this drawing, I get this error. I assume it's because my FG surface is not directly in the storm sanitary.dwg.
How do I get rid of this error, without combining drawings, or promoting the surface to one or more drawings? Isn't this exactly what data references is made for?
I try to wire the length parameter of a taper object to the local Y-Position values of another object. It works fine until I reload the file. I get an MAXScript Wire Controller Exception error:
--Runtime error: Illegal self-reference in controller script
...and the parameter-wire dialog opens. The desired functionality returns by clicking the Update Button and everything works fine again.
(visual studio 2010 c# and AutoCAD 2010 )
I`m trying to open a DWG file as follows.
using Autodesk.AutoCAD.Interop;
using Autodesk.AutoCAD.Interop.Common;
AcadApplication gbl_app = null;
[Code]...
and I get the following error
System.Runtime.InteropServices.COMException (0x80010001): Error al crear una instancia del componente COM con CLSID {6D7AE628-FF41-4CD3-91DD-34825BB1A251} desde IClassFactory debido al siguiente error: 80010001.
I was wondering if there was any way to control what gets loaded - almost like a "Safe Mode" with only basic functionality.
View 2 Replies View RelatedI'had just met another matter for my Add-on. I noticed that when I instance a new drawing, while a first one is opened, when I load a new Form, this one keep all first drawing's properties. What could happen?
For example, I would like to add the layer list on a ComboBox.
My source:
Private Sub LayerBox_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load '***************************' '* Initialisation LayerBox *' '***************************' Using acTrans = acCurDb.TransactionManager.StartTransaction() acLyrTbl = acTrans.GetObject(acCurDb.LayerTableId, OpenMode.ForRead) For Each acObjId As ObjectId In acLyrTbl acLyrTblRec = acTrans.GetObject(acObjId, OpenMode.ForRead) ComboBox1.Items.Add(acLyrTblRec.Name) Next acObjId End Using End Sub
This source works, but if i instance a new form on a new drawing, the first drawing's layer list is kept and the new layer list on the second drawing is ignored!
I call an instance of an inventor using inventor api ,vb.net code. here is my code
inventorApp = CreateObject("Inventor.Application", "")
inventorApp.Visible = True
My doubt is and how can I close this inventor instance.I tried
inventorApp.Visible = False
I have a situation where it would be expedient for me to be able to bind only one instance of an xref and leaving the others intact. I have to do this for several different x-refs. Is this possible in Autocad 2008? If I use the xref manager I can only see an option to bind the entire reference.
View 7 Replies View RelatedI'm trying to insert a new instance of a X-Ref already present on the drawing. If i use Database.AttachXref(path, name) I receive "ref NAME has already been defined. Using existing definition." on the command bar. I've tried to retrieve the ObjectId of the X-Ref definition from the X-Ref name, but my code don't work. Where is the error?
Here's my
Private Sub AttachXRef(path As String, name As String)
Dim Doc As Document = Application.DocumentManager.MdiActiveDocument
Dim Db As Database = Doc.Database Dim pPtRes As PromptPointResult
Dim pPtOpts As PromptPointOptions = New PromptPointOptions("")
[Code] ...
I've run into to some trouble when trying to create an instance of AutoCAD.
In fact, the behavior is strange, and it leads to believe it's not from creating an instance!
Anyways, I'm coming straight from VB6, so I used: Dim rpDoc As AcadApplication
I just re-installed windows and all the fine (PITA!) trimmings. Now, when I open a file (any type) for Inventor thru windows explorer it opens a NEW instance of Inventor everytime! This is a HUGE system hog, waste of time ect ect.
How can I correct this to just open in the instance that is already there?
Inventor 2014 PDS
I want to create some modules for a platform deck. The modules are made of C5x6.7 channels in one direction, L2x2x3/16 angle stiffeners in the other direction, and 3/16" deck plate on top.
My "drivable" parameters will be length and width.
The modules will all be different sizes, so I need to be able to have every instance of the assembly be different.
The workflow I was attempting to do before I got stuck was this:
1. Create a skeleton part (just a sketch) with Length and Width parameters.
2. Insert in an assembly and use frame generator to build the structural shapes (channels and angles)
3. Insert another part (the 3/16" plate) that can reference the length and width and adjust to be the correct module size.
Is there a way to make parts in an assembly all follow the same parameters? More importantly, can each instance of this assembly show up differently and be adjustable when I place these modules in my main assembly?
I don't know much about iParts - but it looks like an iPart lets you choose from predefined dimensions - I want something that I can custom input any size I need.
I'm struggling with accessing multiple AutoCAD 2007 instances via COM. I have tried retrieving objects from ROT using monikers, but only succeeded in getting AcadDocument objects only. Is there a reliable way to achieve my goal?
View 2 Replies View RelatedI have a problem creating an instance of the AcadApplicationClass. The program is very simple:
Assembly autodeskWrapper = Assembly.LoadFile(@"C:WindowsassemblyGAC_MSILAutodesk.AutoCAD.Interop17.0.54.0__eed84259d7cbf30bAutodesk.AutoCAD.Interop.dll"); Type acadAppClassType = autodeskWrapper.GetType("Autodesk.AutoCAD.Interop.AcadApplicationClass"); object m_acadDApplicationClass; m_acadDApplicationClass = Activator.CreateInstance(acadAppClassType);
and the exception is:
Retrieving the COM class factory for component with CLSID {28B7AA99-C0F9-4C47-995E-8A8D729603A1} failed due to the following error: 80040154.
AutoCAD 2013 is installed but no license is provided (there is a 30 day trial period). I am trying to launch AutoCAD.
In C:WindowsAssembly folder I can see the Autodesk interops:
Autodesk.AutoCAD.Interop and Autodesk.AutoCAD.Interop.Common. Their version is 17.0.54.0.
In Component ServicesComputersMy ComputerDCom Config I can see an enttry - AutoCAD Drawing. Its CLSID is: 6A221957-2D85-42A7-8E19-BE33950D1DEB.
I`ve read that the exception is because a 32bit process is trying to use 64bit DLL or vice versal. I have compiled my program in both 32bit and 64bit but with no results - I am getting the exception in both cases.