I'm trying to cut through the angled object on the underside of the curved object to cut it into 2 sections and remove the upper, so that I'm left with the upper curved deck covering the front object.
I've tried Slice and Separate and Subtract but I can't get what I want.
I'm having a problem sweeping a curved object over a spline. The object will sweep over a straight line...but not on the spline. I keep getting "unable to sweep object(s)" in the command line. I could be doing it all wrong... I've attached the file.
View 9 Replies View RelatedI've recently had to export DWG files to PDF and the lines print in black whether they are angled/curved or straight. The problem I'm experiencing is that a number of objects that have been rotated at an angle or lines that are curved appear dark grey on the screen in PDF format. I'm using the DWG to PDF. pc3 with monochrome setting selected. I've checked the Plot Style Table Editor and all colours have been selected to print 'black'; greyscale is 'off' and screening is at 100%. Is this a 'bug' or is there a fix for this problem?
View 6 Replies View RelatedI've recently had to export DWG files to PDF and the lines print in black whether they are angled/curved or straight. The problem I'm experiencing is that a number of objects that have been rotated at an angle or lines that are curved appear dark grey on the screen in PDF format. I'm using the DWG to PDF. pc3 with monochrome setting selected. I've checked the Plot Style Table Editor and all colours have been selected to print 'black'; greyscale is 'off' and screening is at 100%.
View 9 Replies View RelatedMH.dwg
I'm trying to slice the grey cylinder object in the attached drawing with a curved network surface. Rather than slice around the path of the surface it seems to have just taken a planar slicing plane between the 2 vertical edges of the network surface.
On Photoshop CS4 - I want to place a 2d image onto a curved 3d object so that the object rotates with the picture curved right onto it. How do you achieve this?
View 4 Replies View RelatedIm trying to custom fill a curved object with a jpeg image. Im sure ive done this before with no problems but ive been doing it all morning with no success.
View 9 Replies View Related have number of curved objects which makes a design but goes in straight way. what i want is to follow that grouped objects to a curve .
Power Clip option is not suitable for me as it reposition its original state. is there any other option which can make it in better way.
I'm trying to wrap an image around a curved object. This is a front elevation of a sign I am attempting to render and the sign wraps around a pole. What I am attempting to do is not just "squeeze" the copy but actually attempt to show what the image will look like if you are looking directly at it which means that the closest portion of the image will look normal but as you look further out towards the edges then the graphic and copy would appear to merge and disappear backwards. I hope I am explaining this well. I am trying to wrap my brain around this concept. I know you can do this in photoshop with stretching but cannot fathom how I can attempt this in CorelDraw or Illustrator.
View 14 Replies View RelatedI would like to know how can put planar surface to solid object which surface is curved like cylinder for example. When start draw from first point rectangle of planar surface follow x cordinate not that solid object. How to do that simply?
View 9 Replies View RelatedI have a rather simple 3rd party custom object... I tried to get its bounding box but the coordinates that come back don't seem to relate at all to the object.
What I'd like are the coordinates of two nodes the object contains...
Is it possible to apply the autocad cursor in some why with the node object snap to get their coordinates?
I've already started using the AutoCad 3D.
how to put a 3D object on top of the another 3D object in autocad"! E.g.,I want to put a 3d object of one leaf (raised 1") on top of the vase, so that the edges of the leaf are placed completely on the surface of the vase.
I extruded the leaf 1" first, then tried to copy it on a solid cylinder of a vase, but it didn't work!!! It seems to be simple, maybe not!
Is it possible to select an object for reading in an XRef?
PS I think it has something to do with Editor.SelectNestedEntity() but it is the end of a long day and I can't fathom it out
When I select an object and pan to make another selection the first object "deselects". The object(s) will stay selected until I pan and as soon as I start to pan the grips go away and the object(s) is deselected.
View 9 Replies View RelatedHow do I keep the fill ON the object that gets selected so I know not to pick it again as move through the drawing?
How /or/ where can I get a listing of my SetVars.
Running the Setvar (?) command doesnt offer a description for each?
We upgraded to AutoCAD Mechanical 2012 (from AutoCAD Mechanical 2009).
I used to go: TOOLS > DRAWING ORDER, in order to bring an object to the back or the front of another object.
Now that we are using AM 2012, I can't find where this command is located.
I get the following exception message while debugging, after pasting VBA code into my vb.net project:
"Object reference not set to an instance of an object"
Without going to specifics yet, I commented-out ObjectCollections and the error happened further down in the class.
Is there a different way ObjectCollections are handled in a vb.net class, versus a VBA module?
I want to Make Polyline object instead of Line object. How to change the object?
View 1 Replies View RelatedI'm making a surface out of contours. The problem is the contours have the elevation listed under object information, not geometry (the contours were brought in from a GIS file, which I do not have access to, or I would bring them in again with the elevations properly assigned, this is not an option). How can I quickly change the geometry elevation property to match the miscellaneous property?
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
I've just changed a VS compile options to use .NET Framework 3.5 (previously Framework 4).
My user controls that I've added as containers for the pallette don't seem to agree with it and I get a "Object reference not set to an instance of an object" error on each of their resx files. And one on Resources.resx.
Attached is a screenshot.
Is there anything I can do to fix this?
So picture the workspace....
A flat image is draw, it is a long rectangle (632x50). Is it possible for this object to be 'wrapped' so that it creates a 3D object?
I am designing an item to be made, a one of. I am printing this, backing it with card and wrapping it to create a model. I want to know if this can be done virtually so that it may be added to the printed sheet when it is handed over to the craftsperson for production.
Can I unfold a 3d object to get a 2d object. Example" If i have a cone with the top chopped off, can i get the 2d plan view unwrapped in this software ?
View 1 Replies View RelatedResizing objects is a mess in CorelDRAW X6 when objects are outlined with Scale With Object enabled to retain proportions after resizing.
None of the tools dealing with outlines (e.g. Contour or even Outline itself) continue to work properly after resizing the object.
I strongly suggest to recalculate outline property values after resizing if Scale With Object is checked. Don't just do it hidden somewhere internally in the object model by applying a temporary scaling factor. Instead actually recalculate the actual property values if Scale With Object is checked.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
have to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object
View 2 Replies View RelatedI'm want to drag an objects anchor and have the position co-ordinates offset by opposite amounts so it doesn't appear to move postioin on screen. IS there a tool for that?
View 3 Replies View RelatedIs there a way to exclude single attributes from being defined in a object style? As example: i want to define an outline that does not change width of the objects, but everything else.
There is a small tick box right of every attribute with help text "None this object attribute is not defined by a custom style" but i can not mark it. My feeling is, that i need to switch on this tick box to get the result i need, but i can not. When i click on it, it just gives me a greyed out "Revert". When i try to make child styles, there is a way to break the connection to parent style with these tick boxes, but no luck.
Is it a bug? I tried it with X6, X6.1 and X6.2
1. After creating a clip mask can I view it without the actual object also being visible?
2. Can I paste one object into the clip mask of a different object?
can I snap an object/vertex/edge to another object straight in one axis?
I'm coming from Rhino 3d, where this is possible by holding the shift key.
3ds Max 2012 SP2
i7 2600
16GB RAM
Geforce 560ti OC
I have simple a 3D bottle shape created from about 16 points and I am trying to map a gif image on to it usning CS5. No matter what I have done (work from a new document, etc.) I always get the error message. I also receive this error when I attempt to map a jpg image on to the same shape. I have attempted this on three different Windows 7 machines running CS5 with the same result. When I try it with CS6 the program closes with a catastrophic error and no message. I do not receive this error using the default symbols. The gif and jpg images are imported and imbedded into the document and then moved to the symbols library.
View 6 Replies View RelatedI am having some trouble with a file in Illustrator CS6. Within a layer, when I add a fill to an object, the fill doesn't block out the object paths beneath. For instance, say I have a square object overlapping a circle object in Layer 1. The square object is above the circle in the layer. When I add a fill to the square, the circle stroke still shows through the square even though the overlapped part should be blocked out by the fill. The square is set to normal visibility, and I have made sure that there are no duplicate paths that would account for what I am seeing. (I.e., it's not a case where there's a second identical circle path that is on top of the square, so that it remains visible in spite of the fill.)
Other details:
- I'm mainly working with a white fill, but the problem is the same with fills of any color
- When there's a fill color in the circle path as well, the circle's fill color *is* blocked out—just not its stroke.
- I have restarted Illustrator and restarted my computer and these have not changed anything.
- There are other layers within the same document where the normal layering rules work.
- I tried copy/pasting some of the problem objects into a new document, and in the new document, the fill works properly.
- If I move the problem objects to another layer, then the fill works as it should. But as I'm dealing with a number of paths, it doesn't make sense to create a layer for each to solve the problem.
I can't tell if it's a matter of working in too large or complex a file.
Since i updated PS (CS6) the last time it has this very strange behavior when i try to position a object via the Arrow Keys.When i hit a Button very fast (3 times) the object jumps back to its very first position where i started to move it.
When it is a new "feature" - where can i turn it off?
