AutoCAD 2010 :: How To Make Grid Brighter
Jan 23, 2012how do i make the grid brighter so i can see it more easily when i'm in a room that has a foar amount of ambient light?
View 1 Replies
ADVERTISEMENT
AutoCAD 2010 :: Grid Display - Make It Brighter
Jan 23, 2012how do i make the grid more visible?To explain... if i work in an office with a high degree of ambient light, i find it difficult to see the grid lines!So how do i make them more visible?
View 1 Replies View RelatedPhotoshop :: How To Make Marching Ants Brighter
May 16, 2013It seems like all of a sudden my marching ants are dim to nearly invisible as I'm making a selection. I haven't updated my software. They show up in some graphics better than others, and once I've made the selection, they show up white again. Example: I'll be using the rectangular marquee tool.
This happened at the same time that my custom blending options all reverted to the defaults. However, I hadn't made any custom marching ants settings. I don't know why my custon blending options reverted to the defaults, but it's possible that this was triggered by a hard shutdown that I had to do after my trackpad froze.
Computer: Mac OSX 10.6.8
Software: CS5 extended 12.0.1
Illustrator :: Perspective Grid Tool - Make A Shadow Of Word Flat On Bottom Grid?
Apr 25, 2013When using the perspective grid tool and type, I have a word on the right side of the grid in perspective, and I want to make a shadow of this word flat on the bottom grid. (Like how a tall building casts a shadow flat on the ground)
I tried using the shear tool to do it but it is a bit tricky getting it just right. There must be an easier way to do it within the perspective tool grid.
When I type the word and align it to the bottom grid, how do I rotate it whilst still being aligned in perspective on the bottom grid?If I try and rotate the word using the selection tool it rotates off axis so it is no longer laying flat on the bottom grid.
Words placed on the bottom grid always read from the left vanishing point - I want the word to read from the right vanishing point so it aligns with my word on the right grid wall.
AutoCad :: How To Make A Square Map Grid
May 27, 2012I have been issued the task of putting map grids on building plans. I have a number of building plans that I must put a square grid over, with 2 meter between grid lines according to plan scale.
View 4 Replies View RelatedAutoCad 3D :: Material Looks Brighter When Rendered?
Mar 29, 2013When walking through my model a brick wall looks like the left image below. When I produce a rendered image the wall appears much brighter as you can see. Cause I've never fumbled around with lighting settings. The darker version is pretty much the one I'm after.
Capture.GIFCapture2.GIF
AutoCAD Civil 3D :: How To Make Label On Grid
Apr 30, 2012i am trying to make lable on grid?
i make surface i want grid lavel point.
AutoCAD 2013 :: How To Make A Square Map Grid
May 27, 2012I have been issued the task of putting map grids on building plans. I have a number of building plans that I must put a square grid on top, with 2 meter between grid lines according to plan scale.
View 2 Replies View RelatedAutoCad :: Make A Grid Bubble Annotative?
Oct 12, 2012I am trying to make a grid bubble annotative so that when I scale the drawing up or down the bubble will stay the same size.
View 2 Replies View RelatedAutoCAD 2010 :: Grid References On Borders
Mar 1, 2012I have recently configured various borders for our Inventor software and have now turned to AutoCAD to do the same.
Within Inventor you can specify grid references around the border. eg A-F along the top and 1-5 on the vertical. Can this be done with AutoCAD 2011????
AutoCAD 2010 :: Point Grid To Surface
Mar 21, 2012I have a grid of around 100 points which are spread reasonably evenly.
I need to turn them into a surface as to see the height change between the points more clearly.
AutoCAD 2010 :: Grid In Layout View
May 21, 2010I received a drawing that has a layout with multiple mviews in it. There is a light grey grid showing in the layout, that I can't make disappear. Grid on / off command has no effect. Really it doesn't matter if the grid is showing, but it's so annoying! Creating a new layout would fix the problem, but is there an easier way to get rid of the grid?
View 9 Replies View RelatedAutoCAD 2010 :: Background Grid Is Not Square?
Mar 14, 2012When you first open AutoCAD, the background grid is not square, so a square will not look like an actual square on your drawing.
How do you change this?
AutoCAD 2010 :: Startup Settings - Grid Off
Mar 20, 2012I would like to have my autocad start with my osnap settings, grid off, ortho on, etc. I am not a fan of the grid, and I have to turn it off everytime I start a drawing. Is there a way to create this as a normal setup?
View 2 Replies View RelatedAutoCAD 2010 :: Changing Angle Of ISO Grid And Snap
Aug 9, 2012Im trying to change the default angle of 30 degrees on the isometric grid and snap. Is this possible?
View 6 Replies View RelatedAutoCAD 2010 :: Extending Multiple Grid Lines?
Apr 1, 2012Is there any way to extend multiple grid lines to a perpendicular line?
View 1 Replies View RelatedAutoCAD 2010 :: Crosshairs Moving As If Grid Is Turned On?
Mar 1, 2012I recently installed AutoCAD 2012 and have noticed that my crosshairs are moving as if a grid is turned on. I checked my settings and have turned everything off however, the crosshairs continues to move in "jerk-like" movements.
How do I change this?
AutoCAD Civil 3D :: Coordinate Grid On Layout In 2010 Or 2011?
Nov 19, 2011how create coordinate grid on layout in Civil 3D 2010-2011, such as this
View 9 Replies View RelatedAutoCAD 2010 :: Moving Existing Drawing Objects To Snap Grid?
Dec 22, 2012I have a slightly unusual query that I can't seem to find a solution for elsewhere. I have an existing OS plan that is 'off grid', and would like to adjust the vertices at the ends of all the existing lines and polylines so that they all sit on a grid point. Is there a quick command or script that does this?
View 2 Replies View RelatedAutoCAD 2010 :: Using Break Switches Off Snap (Grid) For First Selected Point
Oct 6, 2011I set a snap for ease of use, e.g. if my intended output scale is 1:50 I will set my snap to 25, this makes drawing lines fast and simple.
When I used the break command in previous versions (I skipped 2011) the break would keep the snap on so I could break either side of a line with a perfect unit gap.
In 2012 when I select the first point it disregards the snap and just puts the break wherever I select on the line meaning the gap is not neat. Is there anyway to put this back the way it was?
Photoshop :: How Do You Make A Grid?
Apr 4, 2003How do I make a grid background in photoshop?
View 4 Replies View RelatedLightroom :: Why Is Raw Image Became Brighter On 4
Nov 26, 2012why is my raw image became brighter on LR4..? it was perfect on the camera lcd but after the importing the raw file to LR4 the image became overexpose.
View 3 Replies View RelatedPhotoshop :: How To Make A Grid Over Many Images?
Jan 29, 2007I used this to make a grid.
Is there an easier way to make a 16 squares X 16 squares grid so that the grid scales with the image size but remains 16X16? Basically I want to add a 16X16 grid to hundreds of images.
Also, how do I put the same grid over many images, like a few hundred?
Paint.NET :: How To Make Grid Of Images
May 27, 2013For a collage? I wanna make a 4 or 9 box grid with images within each. I saw a Youtube video where you could go to Effects > Render > grid-something.
Not seeing the Grid option there. Maybe Paint.net has taken it away since the video was made(?)
AutoCAD 2010 :: Starting Points Of Lines Text And Objects Are At Grid Line Intersections
Jun 26, 2012I cant start drawing an object from anywhere else( ie. inside a grid) except form the points where grid lines intersect. How do i go back to old system? I need to get some work done fast.
View 2 Replies View RelatedPhotoshop :: CS Images Brighter While Editing
Mar 6, 2004I just upgraded to CS from 7.0 and in CS whenever I am editing an image the image appears sigificantly brighter than in any other program or when viewed on the net. ImageReady shows the images properly but CS has every image brightened while I am working with it.
View 3 Replies View RelatedLightroom :: 4 Exported Files Much Brighter
Mar 8, 2014When i import them back into Lightroom 4 they look darker (as they originally were in LR before export). I calibrate my monitor with Spyder 4 pro each month and i have had no problems printing on my Epson r2000 either and have always had accurate prints.
I maybe imaginging things, but it only seems to be with certain photos (most noticably high ISO astrophotography images). I went through old astro shots this week from over a year ago and thats when i noticed the problem. The expoted files are massively brighter than in Lightroom I am at a loss as to what to do. The display profile on my mac is set to the latest monitor calibration. I havent changed anything in LR but i did get rif of a load of crap on my computer this week as it was becoming slow after updating to OS 9 (mackeeper, dropboxes but nothing i could imagine would relate to LR).
Illustrator :: How To Make Artboards Line Up To The Grid
Jan 8, 2013How can you make the artboards line up to the grid? each of my boards is not quite set the same on the grid so trying to place items in the same position from one board to the next is hard.
View 5 Replies View RelatedPhotoshop Elements :: Make Grid Larger In 11?
Aug 17, 2013How do I make the grid larger in Elements 11?
View 2 Replies View RelatedPhotoshop :: Why Clone Making A Brighter Background?
Jul 28, 2008I'm cloning some stray hairs out on model shot on grey background. Only problem is things are looking lighter where I clone. Even I just test the background sampling other background right nearby, the new background is lighter.
View 2 Replies View RelatedIllustrator :: How To Make File Grid (Not Artwork) Translucent
Jun 5, 2012How to make the grid (the file grid - not artwork) translucent. I'm working on icons, so I'm zoomed in very close, and I'd like to have a translucent grid over top of my artwork. An opaque grid is far too cumbersome and intrusive and I can't see my work, but don't want something totally transparent - I'd like to see it. Just maybe 10% translucency. Any better way to go about something similar?
View 6 Replies View Related