I have been issued the task of putting map grids on building plans. I have a number of building plans that I must put a square grid over, with 2 meter between grid lines according to plan scale.
View 4 RepliesI have been issued the task of putting map grids on building plans. I have a number of building plans that I must put a square grid on top, with 2 meter between grid lines according to plan scale.
View 2 Replies View RelatedI used the free select tool to free select an area of an image that is not a square (odd shape), how do I make that selection a perfect square if pasted to new image or new layer??? rectangular would be fine too...
View 14 Replies View RelatedWhen you first open AutoCAD, the background grid is not square, so a square will not look like an actual square on your drawing.
How do you change this?
When using the perspective grid tool and type, I have a word on the right side of the grid in perspective, and I want to make a shadow of this word flat on the bottom grid. (Like how a tall building casts a shadow flat on the ground)
I tried using the shear tool to do it but it is a bit tricky getting it just right. There must be an easier way to do it within the perspective tool grid.
When I type the word and align it to the bottom grid, how do I rotate it whilst still being aligned in perspective on the bottom grid?If I try and rotate the word using the selection tool it rotates off axis so it is no longer laying flat on the bottom grid.
Words placed on the bottom grid always read from the left vanishing point - I want the word to read from the right vanishing point so it aligns with my word on the right grid wall.
I was wondering how I could duplicate the texture of this gear/star thing? I want to use the same texture for a square shaped frame. I already tryed messing with the bevel and emboss layer style but I didnt get a the matching result that I desired.
My next question is how do I make my own custom bevel and emboss layer style textures?
When two flange corners come together? I have attached my model .
View 6 Replies View Relatedi were like to ask how to add square to other picture. The square i one it to look like this and add it to other picture. can it be done?
View 5 Replies View RelatedI have a square that I want to make into a circle, without distorting it. I want to create a circle using it as a stroke... I"m using CS2, can anyone help
I used the transform and the warp tool and got it into a circle, but there were points where it was pinched and it looked stupid.
I thought maybe there was a way to make a circle and use that "pattern" as a stroke for it, but so far I can't figure it out.
i tried making it a brush and needless to say...
We use that square to put around all of our letterhead and official station documents. I've created a CD-Rom media kit of our stuff and want to put it around the edge of the cd label, but unfortunately for me, cd's are round which is not condusive to the template I have....
I recently got the newest photoshop, and I'm confused about paintbrush.in the other version it was always square, but now when I go above a size 3 brush it starts to look a bit like a squary flower. how do I make the brush just a plain square??
View 2 Replies View Relatedhow do i make the grid brighter so i can see it more easily when i'm in a room that has a foar amount of ambient light?
View 1 Replies View Relatedi am trying to make lable on grid?
i make surface i want grid lavel point.
I am trying to make a grid bubble annotative so that when I scale the drawing up or down the bubble will stay the same size.
View 2 Replies View RelatedHow I can update my diesel expression to display the area in square feet not square inches. See expression below.
^C^Cattdia;0;_-insert;AREABLK;1;1;0;$M=$(getvar,AREA);attdia;1
way to make a perfect symetrical square shape with rounded corners and curvy sides. I know it can be done with the pen tool, but my sides are never really symetrical.
View 9 Replies View RelatedHow can round the coners of the square.
View 3 Replies View RelatedI have a .gif image (actually an animated gif) that is currently square, but I've been desperately trying to destructively trim it to a perfect circle to use in a flash animation.
I don't want to use a mask or have the white corners showing where I've trimmed in in GraphicConverter as a circle, unless there a way to make the excess outside of the circle trim transparent, since the backgound image is complex (I cant simply collor the background outside a normal circular trip) and only has a circular "frame" to place this image.
I simply want to take an image (which has a complex logo in it and trim the resulting image to a perfect circle.
how do i use the crop tool to make a square that i can move around the image to crop?
View 1 Replies View Relatedhow do i make the grid more visible?To explain... if i work in an office with a high degree of ambient light, i find it difficult to see the grid lines!So how do i make them more visible?
View 1 Replies View RelatedI would like to make a square with round corners with certain Radius. I use Rectangular Marque Tool with Feathering set to some value. The thing is that when I cut the shape from Layer I don't get a sharp corner but instead I have shaded corner.
View 9 Replies View Relatedphoto-shadow .png
I am creating a stylized Polaroid photo and want the end result to look like it is lifting off the paper by creating a shadow under it. I cannot seem to find a way to do this with the transparency tool. Look at my photo, I want the shadow to fade outwards from the edge of the photo on all 3 sides.
I would like to create a layer with the selected image only. In other words just the outlined image with no square box container the image. These images will go into other publications and on line and I don't want to see the square white boxes with th eimage inside.
View 2 Replies View RelatedI want to crop an image and make the edges round instead of square. Do I do this with a mask? Can't figure out how to use a mask. I went to Mask Outline->Smooth and it cut the image out and left the round edges.
View 12 Replies View RelatedI want to use this pic for my phone wallpaper. I tried to enlarge it but the quality drops really bad. It needs to be 960x800. Is it possible to extend the top part of the picture to make it more "square" without cropping the width?
View 1 Replies View RelatedI'm trying to take the square cd cover image and make a cassette tape cover, or j-card, with that image.
Here's a picture of a j-card template.
Right now all I want is the front cover, spine and tail. I wasn't sure if the templates I found were compatible so i tried to make my own template. What I did was make three separate ones. One for the front cover, one for the spine and one for the tail. I was able to take the square image and use the scale tool to make the image fit inside the front cover. The first problem I had was not knowing if the image quality was good enough to print. It seemed easier to use inches when I made the template and not pixels. So I made the front cover template 4 in by 2.5625 in. I exported the image as a jpg but the final image looked too small. So now I'm not sure how many pixels I need for a printable picture.
Now with the spine and tail most likely I'll just chose a background color and type over it...Artist, Album Name, Song Titles ext. My plan was to use the jpg images I exported and paste them together, then save that final image as a jpg. and print.
My question concenrs this photo: [URL] ... (this is my own photo by the way). Just so you know what I mean with 'sky' later on: you're looking at balconies.
I want to extend it on the left so I can make it a desktop wallpaper. However, the original photo does not extend far enough to allow me to just crop differently. How can I, using GIMP, fill up the new space so that it looks like the sky that's already there?
I have GIMP for Mac version 2.8.3.
How to draw a perfect circle and how to make sure it is perfectly centered inside a square in Photoshop elements using the Ellipse option.
View 2 Replies View RelatedHow do I make a grid background in photoshop?
View 4 Replies View RelatedI used this to make a grid.
Is there an easier way to make a 16 squares X 16 squares grid so that the grid scales with the image size but remains 16X16? Basically I want to add a 16X16 grid to hundreds of images.
Also, how do I put the same grid over many images, like a few hundred?
For a collage? I wanna make a 4 or 9 box grid with images within each. I saw a Youtube video where you could go to Effects > Render > grid-something.
Not seeing the Grid option there. Maybe Paint.net has taken it away since the video was made(?)
How can you make the artboards line up to the grid? each of my boards is not quite set the same on the grid so trying to place items in the same position from one board to the next is hard.
View 5 Replies View Related