How to hide the frame that comes with the equation? I inserted an equation using the “equation editor”. What’s weird is that the equation is inserted with a frame around it! Is there a way to remove this frame?
View 6 RepliesI have a drawing with multiple view ports and multiple raster images
I can shut the image frames off with "Imageframe" )(tframes) this works fine But it does not turn off the viewport frames.
I've tried putting the viewport on it's own layer and freezing the layer. This looks OK on the screen, the frames are gone. But the plot preview shows there are no images showing in any viewport.
How can I just turn off the viewport frames so when plotting I can see what's in the viewport.
I've recently started working in the Application Frame and find that I now prefer this way of working.Is there any way to have the Application Frame hide when in another application?I find it annoying that the big, full-frame gray window persists when I'm using other applications.
It obscures the desktop and any other application windows that I'm not using, and so I can't use the Finder as I've become accustomed to using it.If there was a way to have the Application Frame hide when not in Photoshop I'd be a happy camper.
I'm moving from using illustrator to CorelDRAW and the one thing I can't seem to find is how to hide frame edges - those bounding boxes around text and objects. Is this function available in CorelDRAW?
View 8 Replies View RelatedCS6 This is going to sound confusing. While using transformation tool you see the frame for it or (points for use), is there any way to hide that while using it, make it transparent on screen,in other words.
View 4 Replies View RelatedI am working on a rather big xref setup. The MAIN file has got about 10 OVERVIEW files refferenced in, each of the OVERVIEW files got another 15-20 DRAWING files attached.
Now when i attach OVERVIEW to MAIN it brings in all the DRAWINGS as unique xrefs as well.
Of course i want to see the DRAWNIGS in the MAIN file, but I'd prefer not to see them in the xref-manger (where i want to see only the OVERVIEW files).
An additional problem is that the DRAWINGS contain pictures on layout-tabs which are also shown in the MAIN file xref manager.
So long story short: is there a possibility to "hide" the sub-xrefs in the xref-manager?
I am working with a situation that requires me to block some lines underneath some text, and can't use a background mask because the text is located within a block. I tried to use wipeout, but I don't want the boundries of the wipeout to plot. Is there a way to set the boundries to not plot? I have tried changing the color of my wipeout object to 255, but for some reason I was unable to get that to work (I think that has to do with how my company uses plot styles to handle colors).
View 3 Replies View RelatedIs there a printer setting i need to select so that a wipeout i create is applied to the print? It looks like it is hidden on the screen but when it prints out it is not hidden
View 6 Replies View RelatedHow to permanently hide this tool bar?
As for the tool bar shown in the screenshot below:
What is its name?How to hide it permanently? Is there some settings in the “option” that controls it?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Is there a way to slow down the reaction time of the ribbon auto hide. I currently have the ribbon docked at the side of the screen with auto hide on. next to the ribbon i have a couple of tool bars. when i move across to the tool bar i sometimes over shoot and activate the ribbon which hides the tool bar. Ideally, iwould like to slow down the reaction time before the ribbon appears.
View 1 Replies View RelatedIs there a way to hide or collapse several rows in a Table with a single click? This would be similar to grouping rows together in Excel.
View 1 Replies View RelatedI created a linetype using text shape. Let’s say, that my line is only AAAAAA. Now when I apply this linetype in the drawing, the lines always have a small, line before and after the characters. Actually you see this: -AAAA- . How can I delete or hide the start and end lines.
View 2 Replies View RelatedI have three dwg files. Each of them have separate MrSID files (image files) attached by georeference. Each file also has one or more polylines and hatch objects on top of the image.
ONE of these dwg files is causing problems. EVERY SINGLE TIME I plot the dwg file, the hatch and lwpolyline objects are UNDER the image. So I have to copy the hatch on top of itself and delete the original--then do the same with the pline.
I'm looking for a way to hide a layer in model space, but show it on ONLY my paperspace tab. Problem is, most of my work is in model space (different aspect of this drawing), and although I could pull the objects through to the paperspace tab, it just wouldn't be the way I feel it should be (3d objects should stay in model space imo). However, for the most part I don't need to see it in model space (except for checking 3d elevations of line segments), the finish product is a printed 2d top view.
View 5 Replies View RelatedIn 2012... For Mleaders, Does the text frame (offset) really adjust with the landing gap set? I have been asking for the mleader text frame gap to be larger or adjustable for years. I was just wondering if what I read on [URL]........ was true.
View 3 Replies View RelatedI've attached a drawing with an interesting viewport. The frame of the viewport does not show. The only way to select the vport is via qselect or ctrl+a. I've had a look around the system variables for anything that can cause this. I've also saved the drawing to 2000 dxf version, thinking that it might be a new feature causing the missing frame issue.
View 9 Replies View RelatedEvery time that I open a new drawing which has clipped XRefs, the X clip frame is set to the number 2, and I set it back to number "0", but then when I finish that drawing and open another drawing, then the new drawing reverts back to X clip frame 2.
How or where I can change the setting to the default is always "0"?
According to the documentation the FRAME system variable overrides XCLIPFRAME, IMAGEFRAME, etc., has four valid values, 0, 1, 2, or 3, and its initial default value is 3. While editing a drawing, I set FRAME to 0, and then some time later, tried to set it back to 3. AutoCAD refused to accept this value, saying "Requires an integer between 0 and 2." Typing (SETVAR "FRAME" 3) at the command line also failed. The only way I could get it back to 3 was to use UNDO to go back to the default value. Is this a bug?
View 3 Replies View RelatedI did a :
pdfattach
pdfclip
both the frames
pdfframe 2
Displays but does not plot the PDF underlay frame.
frame 2
Displays but does not plot the frame.and this last one is the override for all frames but...on the printout a few thin lines of the clip (not all) but noting in the preview
Vport frame / border missing? Spoiler (Highlight to read)
View 6 Replies View RelatedHow to have “circular” shape for the frame of leader text?
I wanted to have circular shape for the text of the leader and wondering if such option might be exist.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
My modelspace is showing thru my wipeouts... But the wipeouts are active and I have remade the viewports with the same result. I've used draw order with no change. And here's the kicker. It (the Wipeout) hides the viewport frame, but not the actual model space material being shown thru the viewport. It remains visible.
View 6 Replies View RelatedI have a logo that is a jpg file Xref'd into a title block xref file. In my sheet files IMAGEFRAME and OLEFRAME are set to 0. They are set that way in the Title Block file as well. I still have some sheet files with these system variables set to 0 that still print the border around the logo.
View 9 Replies View RelatedDimensions show when viewport style is set to 2d wire frame, but only show when they are draged outside the viewport frame when it is set to 3D hidden. Policy is no diemensions in modle space. So how do I show dimensions in paper space with the viewport style set to 3D hidden?
View 3 Replies View RelatedI have the following error message:ERROR: Could not create frame surface of window-sectional profile..At various windows and door-window-combinations I added profiles.
View 1 Replies View Relatedhow math works for scale factoring to specfiy a smaller or larger inserted object. Working with a door. I want to set the door at 3'. To do so I need an X scale factor for 12.
The factors for factional inch scale is derived by multpying the denominator of the scale by 12. Then dividing by the numerator.
Example. If the scale for 1/4" = 1',0" is ( 4x 12) / 1 or 48/1.
Not sure if these figures below have anything to do with the scale Factoring problem at hand. But.
For 3/16" = 1'-0" scale the operation is (16 x 12) / =3, or 64.
For whole foot scales like 1" = 10', mutlpe the feet side of th equation by 12.
I'm just starting out with learning equation curves in Inventor.How can I get this curve
r(t)= ti + 4cos tj +9sin tk; where t is greater than or equal to 0
how to get this VBA as an equation curve
I need to make a model of saddle surface. The surface is given by equation z = y^2 - x^2, and I must have some thickness - It will be printed on 3D printer.
I have Inventor 2014 and I dont see possibility of making the surface directly in Inventor. Is there any trick for that?
I'm afraid I cannot use solution as stated here Equation-driven surface , because saddle surface looks like this hyperbolic paraboloid .
I tried this solution: I made 3D surface in Matlab, exported it in .stl and opened in Inventor - but this only makes the surface with no thickness. Functions extrude, loft require 2D sketch.
Can an equation be used to calculate equal distances when using the rectangular pattern.Regarding the attached .ipt file i would like to place 25 holes in the X direction with equal gap size between each hole.Also how to calculate the number of holes in the Y direction again with equal distance between each hole.I have not done this before with equations but was thinking that i would need to use the Length x Width in the equation.Do i need to add figures into the Parameters box also?
The attached file with the Hole feature the sketch is not constrained for the purpose of using an equation so i know how far from the start of the part to get equal distances between each hole to the end of the part .
I need to put the following into equation form to plug into a User Parameter:
if d91 falls in the range of 4" to 11"
then d92 = d91 + 2"
else d92 = 7.5"
Windows 7 Pro, SP1
Inventor 2012 SP1
Due to the nature of our business, I am not permitted to attach any files showing models or .idw environments of any actual work-related components.
how can i access the value in this column using vba?
View 1 Replies View Related