Is there a way to slow down the reaction time of the ribbon auto hide. I currently have the ribbon docked at the side of the screen with auto hide on. next to the ribbon i have a couple of tool bars. when i move across to the tool bar i sometimes over shoot and activate the ribbon which hides the tool bar. Ideally, iwould like to slow down the reaction time before the ribbon appears.
View 1 RepliesCan you set the Command Line to Auto-Hide? I know I can set the transparency down to 10%, but Auto-Hide would be better.
HP DV7 Laptop
Intel Core i7-3820QM 3rd Generation Quad Core 2.7 GHZ CPU
16 GB DDR3 RAM ( 2 DIMM ) / 180 GB SSD
Nvidia GeForce 650M Graphics w/2 GB Memory
Windows 7 Professional 64 bit / AutoCAD Civil 3D 2014
Is there any possibility to auto hide the Panel Bar and the Browser Bar ? I'm looking for something that works the same way as the AutoHide for the properties in AutoCad.
View 9 Replies View RelatedI cannot find any way to switch off the auto-hide for the Render Image menu in Inventor Studio 2013. I know how to do it for other menus, and Bobvdd posted a registry hack a couple years ago for 2011. I cannot find anything for this dialog, and I would really like it to stop.
Inventor Professional 2014
Windows 7, x64
Dual-core i7, 8GB RAM
NVIDIA Quadro FX 880M
HP Elitebook 8540w
Currently using 2013. In 2011 or 2012 when Anchoring Right (or Left) a palette Auto-hide has behavior that seems odd to me. If you click Auto-hide on an anchored palette to open it (and presumably keep it open) it detaches from the anchor. And then when you close it you lose the palette on the anchor. To me this wastes time. I'd like to keep that palette open to work a bit and not have to hassle with it by not having it open, but at the same time don't want to waste time later calling it up and anchoring it again. Is this still happening in 2013?
View 1 Replies View RelatedCS3
I have by chance got PS to auto hide & show the toolbars and I have now lost it again.
as the toolbars are out of sight and only visible when I need it.
On windows is there anyway to Auto-Hide menus?
Like this: [URL]....
Unfortunetly its only for ubuntu from what I can tell: [URL]....
I did go to the preferences and changed the icon panel to hide but it does not work... I also did what is suggested and exited the program to activate any changes and it still does not work. I've seen folks who produce tuts with this feature so I know its possible.....
View 9 Replies View RelatedI've had PSP X3 for a while but it was too much for my old XP machine. With a new Win7 pc, I've installed PSP X3. The "auto hide" function is missing from the palettes. I have PSP8 and PSP10 so I've used the feature before.
View 2 Replies View RelatedI am working on a rather big xref setup. The MAIN file has got about 10 OVERVIEW files refferenced in, each of the OVERVIEW files got another 15-20 DRAWING files attached.
Now when i attach OVERVIEW to MAIN it brings in all the DRAWINGS as unique xrefs as well.
Of course i want to see the DRAWNIGS in the MAIN file, but I'd prefer not to see them in the xref-manger (where i want to see only the OVERVIEW files).
An additional problem is that the DRAWINGS contain pictures on layout-tabs which are also shown in the MAIN file xref manager.
So long story short: is there a possibility to "hide" the sub-xrefs in the xref-manager?
I am working with a situation that requires me to block some lines underneath some text, and can't use a background mask because the text is located within a block. I tried to use wipeout, but I don't want the boundries of the wipeout to plot. Is there a way to set the boundries to not plot? I have tried changing the color of my wipeout object to 255, but for some reason I was unable to get that to work (I think that has to do with how my company uses plot styles to handle colors).
View 3 Replies View RelatedIs there a printer setting i need to select so that a wipeout i create is applied to the print? It looks like it is hidden on the screen but when it prints out it is not hidden
View 6 Replies View RelatedHow to hide the frame that comes with the equation? I inserted an equation using the “equation editor”. What’s weird is that the equation is inserted with a frame around it! Is there a way to remove this frame?
View 6 Replies View RelatedHow to permanently hide this tool bar?
As for the tool bar shown in the screenshot below:
What is its name?How to hide it permanently? Is there some settings in the “option” that controls it?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
How the actual file location of a drawing can be shown on the ribbon insert of just the file names. For example, file name BOM.dwg is located in C:custom---. Currently, the tool bar is showing AutoCAD BOM. dwg but I want it to show AutoCAD C:custom---.
View 2 Replies View RelatedI don't use MLINE much (and thought the command was DLINE) and wanted to draw 2 parallel lines. I found I could type MLINE and do what I want.
I'm trying to get used to the Ribbon and wanted to find it there, but after several minutes wasted looking all over the Ribbon, I never found it. The Help showed the ICON of 2 parallel diagonal lines but I can't find it anywhere.
Everytime I try to attach a Hyperlink to a dwg via the ribbon Hyperlink button I receive a FATAL ERROR: Unhandled Access Violation Reading 0x0000 Exception at e1e7b028h.
View 1 Replies View RelatedIs there a way to hide or collapse several rows in a Table with a single click? This would be similar to grouping rows together in Excel.
View 1 Replies View RelatedI've been trying to incorporate my menus and toolbars into the ribbon environment. I skipped acad 09 so this hasn't been fun. I used the transfer feature in the cui environment to get everything I wanted. I go to 2d environment to check that everything is there and it appears to be there. I load my cui and I get my icons and menus but no ribbon. I have a big message that says, "The Ribbon does not have any tabs or panels currently loaded." I type ribbon to load, but nothing.
I've now messed with this enough that even with the base acad.cuix file I still don't have the ribbons.
How do I add the ribbon to 2010? I just have pull downs and tool bars.
View 4 Replies View RelatedI used to have my ribbon and commandline next to each other but now whenever I try and put them back next to each other it always ends up with one on top or one on the bottom. I added a picture to try and explain this!
View 1 Replies View RelatedI rearranged the order of the panels of the "Home" tab to suit the way I like them to be. When i come in for work and open AutoCAD for the first time, or even if I need to shut it down and open it back up, not only does AutoCAD not start in my profile, but when I do set my profile to current, all of the panels rearrange themselves into default location. I even went into the 'Tools> Customize> Interface' menu to change the order the panels are set in there, but it still doesn't work. Everyday, I need to manually change their locations.
View 4 Replies View RelatedI have a lot of tools with separate installers. But the ribbon- panels merge in one ribbon-tab.
View 4 Replies View RelatedOK, something I did completely displaced my ribbon from the default horizontal location to either a floating or dockable vertical layout. It's probably staring me right in the face but how can I change it back?
View 2 Replies View RelatedI work at a place where we use autocad, everywhere... And I'm in IT and i've been struggling with this for a day now. I got 2009/2011 to work, but when i try to get 2010 to work, it just doesnt want to cooperate. Now when i used to start it up a proxy graphics thing would pop up, and i figured out how to turn that off, but then no ribbon loads.
So i go to the command line and type in ribbon, and i get an error:
"Unhandled exception has occurred in a component, in your application. if you continue, the app will ignore this error and attempt to continue. Object reference not set to an instance of an object" and here are the details..See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at Autodesk.AutoCAD.Ribbon.RibbonPaletteSet.LoadRibbon()
at Autodesk.AutoCAD.Ribbon.RibbonPaletteSet.Initialize()
at Autodesk.AutoCAD.Ribbon.RibbonServices.CreateRibbonPaletteSet()
at Autodesk.AutoCAD.Ribbon.Commands.Ribbon()
at Autodesk.AutoCAD.Runtime.CommandClass.InvokeWorker(MethodInfo mi, Object commandObject, Boolean bLispFunction)
at Autodesk.AutoCAD.Runtime.CommandClass.InvokeWorkerWithExceptionFilter(MethodInfo mi, Object commandObject, Boolean bLispFunction)
at Autodesk.AutoCAD.Runtime.CommandClass.Invoke(MethodInfo mi, Boolean bLispFunction)
at Autodesk.AutoCAD.Runtime.CommandClass.CommandThunk.Invoke()
[code]...
When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
Is there a way to Put / Tranfer Pull Down menus on the Ribbon?
Am I overlooking something simple?
AutoCAD 2012 / Inventor 2012
I'm old school trying to learn new school! I love using my custom toolbars and abbreviations from the keyboard for calling my autocad commands. I am in the process of learning the uses of the ribbon. I have always used the acad menu, then loaded "partial" custom menus. Is this still possible using the ribbon? Not sure how to do this. I like keeping the custom stuff separate, because we have 5 users with a standard company menu and I like the idea of always going back to the original menu. I suppose my question is how do I use the ribbon, and continue to use my partials also
View 7 Replies View RelatedI just installed autocad 2012 and I don't know why this happened after I opened it. I've already tried reinstalling it but it's still the same.
View 2 Replies View RelatedWhen I click on the arrow on the Menu Line the show ribbon choice is "greyed out" How can I fix this to display ribbon when I open ACA 2010.
View 2 Replies View RelatedI want to rename some ribbon tabs. For example in C3D I have an insert tab, but also a map insert tab, but they are both named "Insert". I would like to be able to rename one of them Map Insert instead of just Insert.
View 3 Replies View RelatedI created a linetype using text shape. Let’s say, that my line is only AAAAAA. Now when I apply this linetype in the drawing, the lines always have a small, line before and after the characters. Actually you see this: -AAAA- . How can I delete or hide the start and end lines.
View 2 Replies View Related