Can you set the Command Line to Auto-Hide? I know I can set the transparency down to 10%, but Auto-Hide would be better.
HP DV7 Laptop
Intel Core i7-3820QM 3rd Generation Quad Core 2.7 GHZ CPU
16 GB DDR3 RAM ( 2 DIMM ) / 180 GB SSD
Nvidia GeForce 650M Graphics w/2 GB Memory
Windows 7 Professional 64 bit / AutoCAD Civil 3D 2014
The contour lines themselves are in model space. The contour texts are in paper space. How do I make the line hide under the text?
View 4 Replies View RelatedCan you reverse the direction of an auto feature line generated from a corridor in C3D 2012?
View 4 Replies View RelatedIs there a way to slow down the reaction time of the ribbon auto hide. I currently have the ribbon docked at the side of the screen with auto hide on. next to the ribbon i have a couple of tool bars. when i move across to the tool bar i sometimes over shoot and activate the ribbon which hides the tool bar. Ideally, iwould like to slow down the reaction time before the ribbon appears.
View 1 Replies View RelatedIs there any possibility to auto hide the Panel Bar and the Browser Bar ? I'm looking for something that works the same way as the AutoHide for the properties in AutoCad.
View 9 Replies View RelatedI have the command line in the upper left corner as a floating window which auto hides. Its not clickable, dragable, nothing. If i reduce the C3D window it is still locked to the top left corner of the screen on top of the windows desktop.
COMMANDLINEHIDE doesn´t refresh the situation. I just want my commandline back on the bottom.
My command line is partially off the screen as shown in the attachments below. It started doing this after a reboot this morning. I can't drag it, select it, or find a way to move it in any way. I tried changing the resolution of my monitor thinking it might "bump" it back on the screen. I'm probably missing something easy but I can't seem to make any difference.
View 4 Replies View RelatedI have made some changes to the CUII (URL....) and now when starting Civil 3D the command line stops. Hitting <Enter> bring the command line back to the "Type a command" prompt.
View 3 Replies View RelatedIt happens during many different commands. The command itself doesn't seem to affect this problem. It doesn't always happen, but every so often, as I'm in the middle of a command, when I scroll past a contour line the program freezes. Sometimes it comes back to life after a few seconds of thinking, but sometimes it just sits there non-responsive forever.
Possible ideas:
-Contour Labels set to "Mask Contour Line Only"
-Dynamic Inputs on
-Selection Preview is on (but it's disabled for "When a command is active")
-Surface is shortcutted into the drawing
-Contours are from an XREF
Civil 3D 2013
64-bit HP Desktop - HP Z420
Intel Xeon CPU E5-1620 0 @ 3.60 GHz
24GB RAM
AMD Radeon HD 6570
Windows 7 SP1
I have been having the following happen in a number of my drawings for the last two weeks. Whenever I wblock anything, I get the follwing characters added to the message:
Command: w WBLOCK 1 found
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢㤴㐺
桰皺Couldn't find the message 4 in msg database 49
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢㤴㌺
Couldn't find the message 3 in msg database 49
It doesn't seem to affect anything in the wblocked drawing or in the original drawing.
Civil 3d 2011 or 2012
Quad Core Intel
Windows 7 x64
8GB RAM
Civil 3D 2013/ When I try to move or un-dock the command line window, a red circle with a line through it appears.
When I switch work spaces still the same result.
I keep my command line docked, but as I type a command as an example "LINE" it displays my typing where
my cross hairs are. I want it to display at the docked command line not at my crosshair location
Since last week (4-19-2012) Our users have been expierencing cursor issues and freezes with Civil 3d 2012. Entering commands in the command line very slugish, pressing the shift key to select / de-select, trim, open osnap menu, ext.
We are running Win7pro6d bit quad core machines with 6gb ram, ATI FirePro V4800 (FireGL), Intel Xeon ES640 (2.67 ghz). AutoCAD Civil 3D(SP2) and all hotfixes installed.
This problem just started one week ago and It started with the cursor jumping all over the place when crossing objects. However; we now have very sluggish command line entry, 2 - 3 seconds after typing till it shows up, and cursors freezing when pressing the shift key for any reason.
I cannot find any way to switch off the auto-hide for the Render Image menu in Inventor Studio 2013. I know how to do it for other menus, and Bobvdd posted a registry hack a couple years ago for 2011. I cannot find anything for this dialog, and I would really like it to stop.
Inventor Professional 2014
Windows 7, x64
Dual-core i7, 8GB RAM
NVIDIA Quadro FX 880M
HP Elitebook 8540w
Currently using 2013. In 2011 or 2012 when Anchoring Right (or Left) a palette Auto-hide has behavior that seems odd to me. If you click Auto-hide on an anchored palette to open it (and presumably keep it open) it detaches from the anchor. And then when you close it you lose the palette on the anchor. To me this wastes time. I'd like to keep that palette open to work a bit and not have to hassle with it by not having it open, but at the same time don't want to waste time later calling it up and anchoring it again. Is this still happening in 2013?
View 1 Replies View RelatedCS3
I have by chance got PS to auto hide & show the toolbars and I have now lost it again.
as the toolbars are out of sight and only visible when I need it.
On windows is there anyway to Auto-Hide menus?
Like this: [URL]....
Unfortunetly its only for ubuntu from what I can tell: [URL]....
I'm using Autocad 2012 LT. Start a new drawing, in model space create 2 viewports, draw a closed polyline (rectangle), and then issue the hide command. The polyline vanishes !!! Turning it into a block solves the error. And hatches vanish as well.
View 9 Replies View RelatedI did go to the preferences and changed the icon panel to hide but it does not work... I also did what is suggested and exited the program to activate any changes and it still does not work. I've seen folks who produce tuts with this feature so I know its possible.....
View 9 Replies View RelatedI've had PSP X3 for a while but it was too much for my old XP machine. With a new Win7 pc, I've installed PSP X3. The "auto hide" function is missing from the palettes. I have PSP8 and PSP10 so I've used the feature before.
View 2 Replies View RelatedWe just started using autocad 2013 after many years on autocad 2005. I am working on a 3d model, and whenever I do a "HIDE" command, everything looks OK, but I can't select anything until I do a regen. This was never a problem in 2005. Some of the drawings I work on are quite intense and using the hide command would definitely work with selecting the proper objects. Why can't I select or find endpoints or centers any more after doing a hide?
View 1 Replies View RelatedHow to create hide situation using AM2DHIDE command in AutoCAD 2013? This command was exist in AutoCAD Mechanical 2009. But when i tried to edit this command in AutoCAD 2013, it displyed as unkinown command?
View 3 Replies View RelatedI saw some years ago a 3D drawing where hidden lines were dashed after hide command. I tried to find out, how it was made, but nothing. Today I need this solution, but I can't find information, how is it possible.
View 2 Replies View RelatedI press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Using Windows7
without reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
line command is a multiple command. there is a way to execute it like a single command?
View 4 Replies View Relatedi have a 1000+ table i need to put there formation Level which one i need to subtract from PGL level so any .lisp or any method how to subtract it if manually i need to minus each value from PGL
suppose my PGL at offset 5 is 105.452 so i need to show on offset 5 Formation Level so i will minus 105.452-.63=104.822 is Formation level is there any good option to subtract table automatically
Using AI CS6, I am trying to hide artwork that extends beyond the artboard, but I cannot find the command in any menu. Where is it?
View 3 Replies View Relatedif I select a line, then enter the move command, the line unselects also when I select a line, then hit delete, the line is still there both of these used to work
2013 Civil 3D
Basically I got a process which is quite long , let's say 30 seconds.
I want put a counter at command line showing to
user how many objects has been processed so far. But I don't want to use New Line Feed to change the line and keep each new number at same line and same location of command line.
If we can access the Auto Balloon Command using Inventor Drawing API.
View 6 Replies View Related