I wanted to copy some keyframes from AE to Calc, but when I copied it back it only created one keyframe, instead of the two. When I copy them from AE to the Windows Editor, do some changes there and copy them back, t works fine and there are two keyframes.
Â
"I have to changed the name"
Â
(Here the pictures when Importing Keyframes to Calc)
I have created keyframes from audio file and used them to generate some effect, all works fine, it is amazing how easy it is However, I would like to generate flash (?) so that these effects would be dynamic to different audio files after export.
What I want is basically to create effects that can be used in life event to the streaming music.
I have this audio layer that I want to add as a soundtrack to the intro video I made. The audio is a bit longer than the intro so I added 2 keyframes at the end of the audio to act as a fade out (I decreased the audio levels from +0.00 dB to -19.00 dB). The problem is when I export the project, I don't hear this faiding out. Is like AE doesn't "reads" the 2 audio keyframes. (When I hit play inside the project, with RAM preview, I can hear the fading out, but not when exporting). I have to mention I export the project as .FLV, as .AVI exports much bigger files. I attached a screenshot so you can see the keyframes I'm talking about.
View 3 Replies View RelatedI was just wondering whether you can resize an object using keyframes. I want to have the object start small and then project and open out and grow. Is this possible?
View 1 Replies View RelatedIs there a keyboard shortcut to only show keyframes?
Â
I usually use "UU", but that shows keyframes, plus expressions.Â
how many keyframes and layers I ended up using. Does AE have any kind of function for getting this info?Â
View 1 Replies View RelatedCan I attach on PNG image that I move to different directions by keyframes some elements with tracker?For some reason he does not let me choose the layer of the image I want to be thw "motion source".
View 5 Replies View RelatedI notice that if I use the CS6 feature of holding down the shift key while pickwhipping a new parent (to get the child to move to the parent), it deletes any keyframes I have set (position,scale,rotation). Is this normal behavior?
View 1 Replies View RelatedI have several placeholders where I have added keyframes for instance opacity fade up and down at the beginning and ending of the layer. If I replace it and the video is longer/shorter than the placeholder then the keyframes will not adjust. Is there some way to have keyframes move dynamically based on the video length? I looked into expressions to calculate the start and end time of the layer then fade in and fade out using the time but it was quite time consuming and inefficient, it would also be hard to write new code for say position versus have dynamic keyframes.
View 2 Replies View RelatedI created a 3D object (a Doctor Who TARDIS) just for fun and I'm trying to figure out how to animate it spinning in space with the orbit camera and keyframes. I do the orbit and the keyframing works fine, but when I play it back the whole thing zooms in and out madly, almost like it is throbbing in and out. This funny "throbbing" happens in between the keyframes.
Â
The zoom attribute in the camera options is actually locked, the only attributes changing as I move along the timeline are the position attributes, which I am keyframing off.
This is a pretty basic function in the Graph Editor.
All I want to do is copy some keyframes at one point to farther down the timeline IN the graph editor. Basically, select some keys, move to a new time and paste those same values. When I paste, all it does is add keys to the existing curve. I haven't used maya in awhile (2008 version), but I'm PRETTY sure this function was available. Why doesn't it work in 2011?
I've searched online, I've tried copying, moving to new time, create some keys, select them and then paste over them, but still doesn't work. And yeah, I know about the middle mouse button time slide trick, which is a workaround but doesn't work if you're copying multiple keys over time. I want to be able to do this BASIC function. What's the deal? On a Mac.
In After Effects CC/CS6 how do u copy a scene and unlink it from the orginal source? It doesn't matter if I copy or duplicate a scene, it will also change it in the original..I have some text I want to change in the copied/duplicate scene, the rest I want it to be the same.
View 2 Replies View RelatedIn PS CS4 In my layers palette, I used to be able to have an effect (ex. drop shadow) on a layer & drag that effect onto another layer so the layers would have the exact same effect. In CS4 when I drag an effect, I lose that effect from that layer & it is put on the layer I dragged it to only. It will not let me copy it anymore. Is there some key I should be holding down now? I am wondering what else I will be running into with CS4. Maybe that wizard will pop out & yell at me.
View 1 Replies View RelatedAny way in X5 to save or copy the modifications/effects from one photo to another? I took photos of some old building drawings and used clarify, noise removal, contrast, etc. I wanted to apply the exact same modifications to all of the other photos of the drawings. Is there a simple way to do this? Can I save it as a preset or filter or something similar. It would sure save a lot of time.
View 2 Replies View Relatedi'm completely new to 3DS Max software. I am using 3Ds MAx 2012.  I have a model. Is it possible to DELETE the key frames and change the animation. When i created another new object, it allowed me to delete key frames, but not this one. One more thing: There are no red bars in the time slider for me to edit/ delete.   When i right click on the time slider, 3 things pop up:
- filter
-configure
-go to time
Â
The "Delete" option is blanked out?
Just added an mp4 and can't add a keyframe to either audi0 or visual.
Â
When I try, I get the red line (render ) and when I click add key frame again the line turns to yellow.
Â
This is from get-go as this is the first edit that I want to make - a fade in.
We just migrated from FCP to PR CC, and my editors are used to adding position and scale keyframes with a shortcut key stroke. I haven't found a way to do this in Premiere without having to go to to the Effect Controlls and click on the stop watches for each motion option. We edit a ton of photo montages, and having a quick way to drag our CTI to the beginning of a clip, press a key, go to the end of the clip, move/scale with the mouse in the program window and be done with it would be solid!
Â
Additionally, once we time the photos to the VO and have made our keyframes, we add our various transitions throughout the timeline. When doing it this way, the keyframes have to be re-adjusted to cover the transition frames before and after each clip so the movement through the transitions are smooth. Â
Â
We have tried some plug-ins that try to work with this, but they mostly seem to add MORE options opposed to offering the 6 mostly used movements, in/out, out/in, up/down, down/up, left/right, and right left.
I envision a sale-to-fit frame both vertically AND horizontally (filling the screen without pilar or letter boxing), then choose one of the 6 basic movements.Â
Then, if the magic developers could allow an editor to save customized transition pre-sets (like dissolve, blur dissolve, scatter, dissolve, flip, dissolve, etc.), and magically apply the presets to the clips on the timeline while auto-adjusting the keyframes to cover the extra transition frames, man, I'd be a happy camper.Â
I am not getting the keyframes on my Audio graph: A1, A2, or A3. I want to be able to fade out parts from my audio clip during the editing process and also tweak the audio levels at various points during the editing. How can I get the keyframes to appear back near my audio waves?Â
View 1 Replies View RelatedIs there a hot key for deleting keyframes? Its just a lot of clicks going to the animation tab to delete keyframes.
View 2 Replies View RelatedI used to have this problem with CS5 and hoped it wouldn't happen again when I bought in to CC.
Â
In the timeline certain audio tracks will not allow me to enable clip keyframes. When I try the 'add keyframe' button is greyed out. I can add track keyframes no problem but using them is a lengthy work around. The error also seems to be radom and trashing my prefs makes no difference.
Â
Specs are:
Â
iMac 27" 3.4GHZ i7, 16GB DDR3, Radeon HD 6790M 2GB
Move my audio track (along with my video) down the timeline a bit and have the (audio) keyframes move with it.Â
Â
What I'm doing exactly is:
Â
- Select the Timeline Panel and Ctrl A (Select All)
- Then, click on my mouse on the selected area and drag/move the media down the timeline a bit
- All media moves fine BUT, the keyframes in my audio track A2 does not move
Â
The video keyframes I have move just fine.
Â
The audio on A2 is currently checked as Track Keyframes. I tried selecting Clip Keyframes, but no difference when moved; the keyframes stay at the same original place.
Â
Is it even possible to do what I need to achieve ... or do I have to redo my keyframes manually as Clip Keyframes?
I have a keyboard shortcut for Copy (see directly below). This command doesn't copy multiple. But if I type "Copy" at the comment prompt (AutoCAD 2013) the copy multiple is the default. Copymode is already set to "0".
(DEFUN C:C()
(setvar "SNAPMODE" 1)(COMMAND "_COPY")
(PRIN1)
)
I made a stupid mistake and started lip-syncing a long piece of animation at 25 FPS instead of 24 which I need to use. I just set it to 24 and it put all of my keys on frames like 10.68 or 54.22, it has become really frustrating to animate with. I was wondering if there's some way to snap these keyframes to solid keys instead of having them on decimals, I don't care if the animation is slightly off, I can fix it later.
View 2 Replies View RelatedWhen i press play on physx toolbar everything is simulating fine, from start to end.Problem is when i want to bake physics simulation to keyframes.
3dsmax freezes and whole process is taking a lot of time, about 8 hours.
Simulation without baking is taking only 20min.
3dsmax file before baking process have 20MB and file after baking have 9GB
Is there other, more efficient way to bake physics dynamics or to simulate physics Maybe using particles with physics? particle toolbox #2 ?
I have been learning smoke 2012 (mac osx) for some days. I am FCP user, know Photoshop, Aftereffects, premiere pro etc etc..... However i have some small and big hurdles to work away smoothly with SMOKE.
1) Are MASKS available in CC (or color warper) ? ( to relight shot)
2) How to navigate between existing keyframes? (any shortcuts)
3) How to change a part of a clip.....eg. I want to replace a sky from one clip to sky of another clip...how do i go about it? (HLS key or masks etc..i have no clue)
4) In my last export (with lot of blur and motion graphics)..i was only able to export it as DPX and not as .mov file? (.mov was showing error) . Also....I always see some artifacts with my export...why does that happen?
5) Are there any SCOPES in Color corrector....for broadcast safety purpose ? (VECTOR,PARADE etc)
6) Is there any way in smoke .where i can finish and grade my SD clips so they look like HD standard. I mean even some of HD clips look substandard or lacking that vibrant,sleek look..... am i missing something while finishing them. I am not talking about increasing gain/gamma etc to make them look brighter and breach broadcast limits.Am i suppose add a light to the clip so that they look vibrant or any other trick to keep in mind, so clip look the way they should.
Long story short: audio problems when using keyframes or fades (Constant Power). Annoying glitchy noise occurs instead of fade.The problem still happened when the green audio track's gain was set to 0db and one of the two constant powers was deleted.
Â
My colleague says that she can avoid the problem by using Export directly within Premiere, instead of using AME. So this may be an AME issue.It's wasting a lot of company time and I'd like to see this problem solved ASAP!I wasn't able to find any other theads upon searching.
I'll be tweeking my gmask on frame 1. Â (Autokey is not select) Â then I move my gmask to frame 19, make an adjustment, and keframe from 1 to 19 is set. Â I just want to change the whole gmask? Â how to adjust the mask points globally? Â (something like the uber key in mocha) Â that way I can scrub thru my timeline, adjust my mask, and it changes the shape for the entire time, but does not add a keyframe?
Â
also, I have my mask moving in. and points keyframes. Â I find that I need to move the animtion back 2 frames, how do you adjust the timing of keyframes in gmask?
I'm still animating the ball rolling all over the place and I wonder if theres a shortcut or a script that will let me to select all the keyframes in the current frame, in a graph editor.So I can move them simultaneously! =D Click drag selection becomes a pain after several hours..
View 1 Replies View Related I am using Premiere CC on Windows 7, though I have the same problem when keyframing in After Effects CC using the wire removal tool. I am using a garbage matte to crop out a certain part of my frame, and as I go through and keyframe the points of the garbage matte, dots appear in all of the previous locations of the points. This causes a significant problem because I'm making very minute, detailed adjustments and the dots are so close to each other that I will frequently accidentally move a dot for a previous keyframe instead of the point to make a new keyframe.
Â
Say I have a four-point garbage matte, so the four points are the four corners of the rectangle. I keyframe the bottom-left corner to move towards the center of the rectangle just a little bit. There will now be a dot at the point's previous location, and a dot at the point's new location. If I continue to make adjustments, additional dots will appear, 1 for every keyframe that I put in. I need this to stop, very badly, because it's impossible to always click the point to edit the next keyframe when all of these dots from previous keyframes are covering the area. It makes for a lot of mistakes and a lot of going back to redo things and a lot of wasted time.
The Translate K key is gone in gmask? How can you move one point evenly over multiple keyframes now?
Also, CFX clip not working. When I try and make a CFX clip it's just black frames.
In the track view window, the Move Keys Horizontal and Vertical Buttons should restrict the movement of keyframes on the horizontal (time) or vertical (value) axis, but do not in my version of 3ds Max 2012 SP1. Work around include using the dope sheet or using the Keys > Slide or Keys > Scale Value menu items.
View 2 Replies View Related