3ds Max :: Paint Object Tool Is Used To Implement Screws Into The Model
Aug 17, 2012
im still trying to make a minigun following the tutorial but ive run into a problem, in the tutorial the "paint object" tool is used to implement screws into the model and make it more realistic. i have 3DS MAX 2010 and i believe that tool was introduced in 2011. what should i use instead? is there a plug in or something to get that tool in 2010? or is there some other way i should go about this?
remember im not continuing with my tutorial until i get past this speedbump
SKIP TO 15:10 TO SEE WHAT HE IS USING PAINT OBJECT FOR
THIS IS THE TUTORIAL: [URL]...
View 5 Replies
ADVERTISEMENT
Jul 15, 2008
Can I implement magnetic forces into a model or assembly?
View 9 Replies
View Related
Feb 8, 2009
I have a stack of images that constitute a smart object and would like to apply a stack mode of random. Random would randomly select one pixel from the stack and bring it to the top, go to the next pixel location and do the same, and so forth.
For example, if the stack was 5 layers deep, one of the 5 pixels would be randomly selected, without median, averaging, or any other merging algorithm applied.
View 1 Replies
View Related
May 20, 2012
I watched a video, but next to the Lasso icon on the tool bar I don't see a square Selection Mode icon. Also, I don't see a green Apply button.
I was able to remove the object using the Carver tool. However, I had to reduce theTif file to 8 bits. I'm not sure what the difference is. (The photo is for publication in a magazine.)
BTW, when I go to the Corel help page, the top of the page is cut off so I can't get to the search box.
View 1 Replies
View Related
May 19, 2004
I am creating a new layer with a design on it. When I try to fill the object on the layer I am getting the following message:
"Could not use the paint bucket because the content of the layer is not directly editable".
View 1 Replies
View Related
Sep 11, 2012
There is a UI bug in PP X6 where the fields for size on the property bar when using the object picker tool show a tooltip "Scale". See screencap
View 1 Replies
View Related
Jun 14, 2012
CIvil 3D 2013 / My drawing opens in layout view and all model objects are appropriately coloured by layer. If I hit plot at this point, my colour dependent .ctb file works fine. However, once I swtich to model view, all my linework turns white and if I switch back to Layout view it remains white and plots each line with the weight assigned to the colour white.
View 2 Replies
View Related
Mar 15, 2011
wondering how to implement the many facial expressions from facegen to 3ds max to use as morph targets for facial animation. fairly new to max animation.
View 1 Replies
View Related
Jan 6, 2013
I used a little bit Civil 3D 2013 for railway design purpose. I understood all the basics but I still have a question : how to implement a railway with double track? In the library, there is only SingleRail subassembly. I'm not sure how to implement what I want or if it already exists in Civil 3D 2013. I found a topic (2006) : [URL]
View 2 Replies
View Related
May 25, 2013
Is there somone who can explain/show a sample of how a custom drop-down list in OPM can be implemented? Based on some articels by Kean Walmsley, I have successfully implemented categorized properties in the OPM using a .NET wrapper and C#. I have a class imlementing the members of the IDynamic EnumProperty, ICategorizeProperties and IDynamicProperty2 interfaces (based on ObjectARX 2013).
However, I do not really understand how to code custom drop-down list using .NET wrapper and OPM. I am using AutoCAD 2013 and 2014. I have read a lot of posts regarding OPM but there was no useful information in regards to create custom drop-down lists.
View 3 Replies
View Related
Mar 26, 2012
Any good numbering systems that they currently implement in product design, rather than the conventional architectural numbering system mostly seen on websites and forums.
View 3 Replies
View Related
Aug 1, 2012
I have finally decided on a monitor. My first Samsung was defective, so I returned it. I went with a Dell, which was blurry. I went back ot a Samsung because the picture quality, was, hands down, the best.
Anyway, because I've changed monitors several times, I know for certain, that I've left the "Stand Off" screws in the computer.
The hookup cable is definitely VGA.
There is a possibility that when you detached the old monitor you probably unscrewed the "Stand Off" screws as well.
View 9 Replies
View Related
May 4, 2009
I've been working in Illustrator and then rasterizing my file in Photoshop so I can save as a jpg, and for 2 drafts it went off fine, but of course the last and final draft it screws up the colors in the jpg completely, it looks fine when viewed in Ps but when I go to send it out and it's a hot mess...
View 2 Replies
View Related
Oct 15, 2012
I am trying to implement our new Styles Library for our Dimension styles. I keep getting this error (see attached).
I have done everything I can think of, I have mapped the default library to the new styles library location on the server. I have tried everything.
View 6 Replies
View Related
Jan 29, 2013
How or where can I get in ipt - files of DIN 7504-K screws?
View 1 Replies
View Related
Mar 28, 2011
1. After creating a clip mask can I view it without the actual object also being visible?
2. Can I paste one object into the clip mask of a different object?
View 7 Replies
View Related
Feb 15, 2012
I created an assembly with screws and nuts which are not from content center. When creating a section view on Drawing, screws and nuts are also sectioned, but I don't want to.
Is it possible to see entire screws and nuts in a section view?
View 9 Replies
View Related
Jul 17, 2013
I'm modeling a band that will be screwed onto the inside of a sheet metal cylinder. The band will be rolled to the ID of the cylinder. I'm trying to model the holes in the band, and place screws into the holes. I'm not sure yet how the holes will be machined out in the shop--whether they'll be drilled or punched, made before or after the band is rolled, placed based upon degree or arc length, etc.
1. Is there a better way to model the band and its holes?
2. How can I properly and easily insert the bolt into the holes since they're no longer "perfect holes" that can be used in an "Insert" constraint.
3. How can I then pattern the bolt so I don't have to insert one into each hole?
View 4 Replies
View Related
Nov 9, 2012
I have students working on the assignment below. They want both the Imperial and Metric screws to be drawn. Is there a way to draw both on drawing? When we change our units to metric when we draw our 14mm line it is still drawing it 14" long.
[URL] ....
View 5 Replies
View Related
Oct 19, 2011
I'm using AutoCAD 2011 and here is the situtation. I create a viewport. I zoom in to the scale I want to use. Once setup i click out into paperspace all is good. However if i do not lock the viewport, the moment i click back on it, the viewport automaticly zooms extents and screws up what i was trying to show . Is there a setting somewhere that should be set from 1 to 0 or a box not checked off that i'm missing?
View 6 Replies
View Related
Jun 8, 2012
I get the following error when I try to insert screws into a new assembly:
Unable to successfully update the member part file. Problem occurred when setting thread data.
I click OK and the part inserts but the thread does not look right! Compare the threads on the screws on the left (shown incorrect) with those on the right!
Using Inventor 2013.
View 4 Replies
View Related
Jun 16, 2006
I am attempting to find wood screws for use in one of the assemblies I am working on.
I have logged onto the Content Center as one possible resource. Is there any kind of search engine to look for parts? I can't imagine having to go through each manufacturer looking for something particlular like fasteners.
Besides Content Center, any resource for wood screws. I have looked in Grainger, McMaster Carr, PartSpec... and others. All with no success.
View 9 Replies
View Related
Dec 12, 2012
A Group in NORMAL mode containing a NEUTRAL OVERLAY layer blocks all the layers below and outside the Group with a solid grey color.
View 18 Replies
View Related
Mar 15, 2012
Why is it, when I go to Flat Pattern/export to DXF that everything ends up upside down.I have part where it is important that the correct side is faced upp, (brusched steel).
When i Export it to dxf, it is upside down, and the bruched facefacing down.
View 5 Replies
View Related
Jan 30, 2012
It's been awhile since I've had to do orthographic projection. Is it frowned upon to model an object in an orientation other than the intended installation orientation?
View 6 Replies
View Related
Sep 1, 2011
I am making a film and I am wondering if there is any way I can manipulate models and make it look like they crack in half etc.
For ex., I have a helicopter in a scene and it get's shot. Is there anyways I can change/animate the helicopter to look realistically blown up to peices? Not cheesy blow up - like blowing up to blocks and such, but into realistic, organic, pieces.
View 2 Replies
View Related
Jul 2, 2013
Creating a particular object for use in a revit project. I have attached a group of images.
In short, it is an arched wall that is made up of a series of masonary objects (6types), each with the same dimensions, the only difference being they have different openings. The objects just need to be represented as a solid masonary for now. The individual objects need to be shuffled around the arch to test different configurations.
Would the best approach be to develop the objects as generic model families?
View 2 Replies
View Related
May 22, 2013
I have linked a food service RVT model that has 1000+ pieces of specialty equipment. I've copy/pasted the tags from their file to mine. Now I want to be able to type in a tag number and have revit 'zoom to it'. Or I'd like to be able to make a schedule and use 'Highlight' option - but nothing seems to work because the elements are in a linked file.
View 2 Replies
View Related
Sep 5, 2012
Working in AutoCAD 2010. Recently I've started to notice that the dimensions on my print are not exactly aligned with the model/object. Only the dimensions seem to be shifted slightly in two directions (~1mm?). On screen, everything looks great.
Typically, I design 3d parts (model tab), then in the layout tab set up viewports (mview), and dimension in paper space...
Is there some paperspace offset I may have inadvertently invoked?
View 5 Replies
View Related
Oct 3, 2013
Is there any way that i can stretch an Obj that was created as a block right in model space? in another word i usually right click on the block and go to the block editor and stretch inside the editor, i don't want to do that i have reference point in model that i want to snap end point to the reference. As in the pic i want to stretch the right leg to the right 7.5 in.
View 7 Replies
View Related
Mar 29, 2013
Can i scale a 2D object to an exact length and width that i need to fit into a space?
Ive been reading around online and they say use scale/ref, however i noticed by giving the ref length, it does lengthen the object to the ref length, but the height's off!
View 9 Replies
View Related
