CorelDRAW X3 :: Removing Stand Off Screws
Aug 1, 2012
I have finally decided on a monitor. My first Samsung was defective, so I returned it. I went with a Dell, which was blurry. I went back ot a Samsung because the picture quality, was, hands down, the best.
Anyway, because I've changed monitors several times, I know for certain, that I've left the "Stand Off" screws in the computer.Â
The hookup cable is definitely VGA.
There is a possibility that when you detached the old monitor you probably unscrewed the "Stand Off" screws as well.
View 9 Replies
ADVERTISEMENT
May 4, 2009
I've been working in Illustrator and then rasterizing my file in Photoshop so I can save as a jpg, and for 2 drafts it went off fine, but of course the last and final draft it screws up the colors in the jpg completely, it looks fine when viewed in Ps but when I go to send it out and it's a hot mess...
View 2 Replies
View Related
Jan 29, 2013
How or where can I get in ipt - files of DIN 7504-K screws?
View 1 Replies
View Related
Feb 15, 2012
I created an assembly with screws and nuts which are not from content center. When creating a section view on Drawing, screws and nuts are also sectioned, but I don't want to.
Is it possible to see entire screws and nuts in a section view?
View 9 Replies
View Related
Jul 17, 2013
I'm modeling a band that will be screwed onto the inside of a sheet metal cylinder. The band will be rolled to the ID of the cylinder. I'm trying to model the holes in the band, and place screws into the holes. I'm not sure yet how the holes will be machined out in the shop--whether they'll be drilled or punched, made before or after the band is rolled, placed based upon degree or arc length, etc.
1. Is there a better way to model the band and its holes?
2. How can I properly and easily insert the bolt into the holes since they're no longer "perfect holes" that can be used in an "Insert" constraint.
3. How can I then pattern the bolt so I don't have to insert one into each hole?
View 4 Replies
View Related
Nov 9, 2012
I have students working on the assignment below. Â They want both the Imperial and Metric screws to be drawn. Â Is there a way to draw both on drawing? Â When we change our units to metric when we draw our 14mm line it is still drawing it 14" long.
[URL] ....
View 5 Replies
View Related
Oct 19, 2011
I'm using AutoCAD 2011 and here is the situtation. I create a viewport. I zoom in to the scale I want to use. Once setup i click out into paperspace all is good. However if i do not lock the viewport, the moment i click back on it, the viewport automaticly zooms extents and screws up what i was trying to show . Is there a setting somewhere that should be set from 1 to 0 or a box not checked off that i'm missing?
View 6 Replies
View Related
Jun 8, 2012
I get the following error when I try to insert screws into a new assembly:
Unable to successfully update the member part file. Problem occurred when setting thread data.
I click OK and the part inserts but the thread does not look right! Compare the threads on the screws on the left (shown incorrect) with those on the right!
Using Inventor 2013.
View 4 Replies
View Related
Aug 17, 2012
im still trying to make a minigun following the tutorial but ive run into a problem, in the tutorial the "paint object" tool is used to implement screws into the model and make it more realistic. i have 3DS MAX 2010 and i believe that tool was introduced in 2011. what should i use instead? is there a plug in or something to get that tool in 2010? or is there some other way i should go about this?
remember im not continuing with my tutorial until i get past this speedbump
SKIP TO 15:10 TO SEE WHAT HE IS USING PAINT OBJECT FOR
THIS IS THE TUTORIAL: [URL]...
View 5 Replies
View Related
Jun 16, 2006
I am attempting to find wood screws for use in one of the assemblies I am working on.
I have logged onto the Content Center as one possible resource. Is there any kind of search engine to look for parts? I can't imagine having to go through each manufacturer looking for something particlular like fasteners.
Besides Content Center, any resource for wood screws. I have looked in Grainger, McMaster Carr, PartSpec... and others. All with no success.
View 9 Replies
View Related
Oct 9, 2012
Using CoreDRAW, so I drag a PNG from the web ([URL]......) into CoreDRAW. The image shows up perfectly, but the background is black. I know it is a transparent image because the background is white on the web page. I want to make the background transparent.
Also, after the image is transparent, I want to extrude just the visible part. Will I be able to just "Convert to Curves" and then extrude?
View 3 Replies
View Related
Jan 15, 2009
Recently this icon has been appearing on the top left corner of all my photoshop files... it looks like a "insert image" icon (with the 2 mountians) and it has the number "01" beside it. I don't know how I got into this mode but I need out of it!
View 2 Replies
View Related
Oct 14, 2006
how to take a full color pic and then turn it into a black and white of the same thing but also keep some of the color of the original picture...
View 5 Replies
View Related
Dec 12, 2012
A Group in NORMAL mode containing a NEUTRAL OVERLAY layer blocks all the layers below and outside the Group with a solid grey color.
View 18 Replies
View Related
Mar 15, 2012
Why is it, when I go to Flat Pattern/export to DXF that everything ends up upside down.I have part where it is important that the correct side is faced upp, (brusched steel).
When i Export it to dxf, it is upside down, and the bruched facefacing down.
View 5 Replies
View Related
Aug 30, 2012
I was working on a self project and I have text finally set in the right place, but when I remove the outside box, my text disappears as well. I need to find a way to leave only the text on my document and be able to remove everything else.
View 1 Replies
View Related
Jul 25, 2011
I'm running out of time. I ungrouped a set of three images. How do I take only one of the images out? When I try to take one out, all three images come out? I am doing this for a nonprofit organization and it needs to be done today. Did I ungroup them incorrectly or can you not remove only one image?
View 3 Replies
View Related
Aug 6, 2013
I have an irregularly shaped graphic that I want to post to a webpage without any surrounding background. Every time I save it, it creates a rectangular background that is visible when I post it to my webpage. How can I make that background invisible?
View 6 Replies
View Related
Sep 12, 2013
I would like to remove all the Layers with the name "PLOH*" in them, that do not have anything in the same insertion point. I have been trying to select everything in the crossing window where the point3d's are the same but this does not get them all for some reason.
View 3 Replies
View Related
Apr 19, 2009
have jpeg of a child blowing bubbles can anyone advise as to the technique to use for making the bubbles stand out.
View 5 Replies
View Related
Oct 28, 2013
Is there any way to downgrade the license into Network to Standalone of Autocad Architecture.
View 1 Replies
View Related
Aug 31, 2011
Image below, what I want to do is remove the parts of the red logo below the black line. normally I would use the virtual segment delete tool. this is working with the red outer line, but not on the letters. rather than removing the part of the letter below the line, it is removing the whole letter. Also it is leaving a square edge on the line, and not removing it on an angle.
View 11 Replies
View Related
Aug 9, 2011
I am somewhat new to CDX5 and on a VERY steep learning curve.
Anyway, I have an image of a girl and I was able to powerclip the outline away from the background, however I want to remove the infill, which is a dark colour between her arms and her body.  Her arms are by her side.
Also the dark colour between her legs.  I need to do this to superimpose the image across another background.
View 6 Replies
View Related
Jun 4, 2012
I have a red design with a blacl back ground. How do I remove the black. I then want to overlay the transparent red image over another pic.
View 11 Replies
View Related
Dec 3, 2012
Currently running Design Standard Suite CS5, but want to upgrade just PS6!Â
Because of Adobe rules I am unable to do so, must upgrade complete suite! So, I thought maybe I would re-install PS4 (a stand alone unit) and upgrade to 6 from this. Question, do I need to uninstall PS5 first before re-installing PS4? And secondly can I continue to use the other products within CS5 with PS6? I think it is totally unfair of Adobe to penalize loyal customers this way. My circumstances have changed and I don't have the need to use the complete suite as much as I did in the past.
View 3 Replies
View Related
Dec 12, 2011
Recently upgraded from X2 to X4 (via box version). Created one DVD-V and one AVCHD (with -R disc) both only play on pc but not on any stand alone dvd player with "Unknown disk" error. Using the same Pioneer burner which created playable DVD-V before by X2. Did I miss some setting in X4? Another problem is with the AVCHD disc. Laptop won't play the menu at all. Had to go to the stream file and find the video content.
Intel 2nd gen i3 processor
8GB ram
520 HD
View 6 Replies
View Related
Aug 25, 2012
Many years ago I made a transparent 3D logo in PSP, I do not have PSP anymore I have gimp, and I want to do the same thing. But I want to make a logo that I can put on any image, a stand-alone png.
View 1 Replies
View Related
Sep 16, 2012
Calculation of resistance, making a simulation for an aquarium stand. Stand must support about 900 kg., Is made of 18 mm chipboard, combined with screwing.
All vertical walls are triple, its made ​​of 3 pieces of chipboard, and the above is twofold. Policies are also set to increase rigidity all the screwing structure. The dimensions are 2000 (L) x 700 (w) x 774 (h).
what weight support the stand?
View 8 Replies
View Related
Jun 19, 2013
I am new to the paint.net program and loving it, however am battle to find a way to make an image stand out.
View 3 Replies
View Related
Dec 16, 2012
From my vecor drawing program i export a file as DXF/DWG.
Then this file is run true a program to determinaded the plotting lenght on a lasercutter.
But a simple drawing takes som 80 minutes to cut and engrave.
Loading the file into X5 Home & Student is discover that the file contains 29059 lines.
Selecting some lines i can see that there are underlying lines.
How can i remove them without using VBA. And my drawing program has no option to save it to a file type.
Export it as a Atocad version 2000 or 14 doenst change the number of lines
View 4 Replies
View Related
Nov 30, 2012
I have just installed my old CorelDRAW X4 on a Windows 7 X64 computer, and want to work on text within a rectangle. When I try to draw a marquee round the text to move it, the rectangle moves instead (it has no fill). I seem to remember there is an option to select or remove "treat objects as filled", but can not find it.
View 4 Replies
View Related
