how to set the same coordinates to all vertexes, in my case by ''Z'' in one shot. Like just to select them, write ''Z'' cordinates and there you are. See attached IMG
i7 2600 3.4ghz/16gb DDR3/GTX 560/2x DELL U2311H 23''
In attempting to follow a YouTube tutorial, working on a cone shape in vertex mode, when I select a single or row of vertexes, all vertexes get selected. When this happens, I note the coloring ranges from yellow at the selection point(s) graduating to black furthest away.
From this, I assume I have some other parameter/ mode invoked which I am unaware of.
How can I find interior vertexes ? I modelled character in 3DS Max 2011 and exported for Mudbox .But mudbox shows this error :
Mudbox has detected problems in the imported mesh
Photoshop CS3ext.When I go to size an image and try to adjust the size, the numbers take off on their own with out me even trying to adjust. Also in layers, all the slider bars, the numbers go crazy, up and down without me doing anything
View 2 Replies View RelatedI have 2 different lines defined with x and y coordinates.
I want a third line that uses the common x coordinate and a y coordinate that is the sum of the two coordinates.
If this is possible, can i define which mathematical function i use so that i can add/subtract or even use a formula to define?
Further Notes:
The example above is very simple. I have 2 complex curves that go into positive and negative values of y (speaking from a mathematical perspective). I need an easy way to intersect the complex curves at a specified interval and add them at each of those intervals.
For example i may a sine function going in between pi and -pi over a distance equal to 2. I then need to split the curves in intervals of 0.1 and add them together.
Is it possible to create a straight line by using coordinates instead of left clicking on a specific point(my hands are just to shaky when using a mouse to get the exact coordinate) then holding shift and then taking forever trying to get that perfect end point pixel location.
View 3 Replies View Related I'm designing a road, but I have a trouble how to export coordinates table of sample lines?
I need a table of coordinates X,Y of sample lines.
I want to drawn LINE by excel data to autocad 2010, I have excel file x,y and z coordiates.
I want to draw line to import excel data coordiates to autocad ?
I have coordinates for an aerofoil which I put into Autocad and plotted using pline. I have 52 points, what I want is to have more points on the aerofoil, i.e interpolate. I can probably create more points by averaging two adjacent y-points and two adjacent x-points but it would be much better if Autocad did this
the LIST command only gives the points i put in the program.
Capture.JPG
I have noticed this problem while cutting with cut tool in vertex mode an editable poly. I am getting this preview of aligned vertexes. Can I switch this option off? Because it just get's in the way.
View 7 Replies View RelatedI am testing using script files to automate inserting blocks for As-Built drawings. My script files run fine, but AutoCAD is placing the blocks at a location that is different than what the input on the command line shows. For instance, I am placing a block at (6,6), which is reflected in the command line, but the block is actually placed at (6,5.898). The 5.898 does not appear anywhere in my script file, and the command line even shows that (6,6) was entered for the insertion point.
View 4 Replies View RelatedI'm working on a stream restoration project and we need to determine the x coordinates and corresponding elevations along a stream alignment at certain sample lines. The centerline of the stream's alignment has been created as well as sample lines for cross sections at 50' intervals. We need the coordinates & elevations of each sample line (cross section) exported into an excel/txt document.
For instance, at station 1+00 of the alignment we have a sample line. We need to know to the right and left along that sample line the corresponding elevations and that x coordinate) from the alignment. Primarily, whole contour intervals but more information would be useful as well. I was hoping this could be automatically generated.
I'm working with a mesh. Let's say one part of that mesh is planar 4 sided face. I need to split that face, so I use Split Face tool to split it into two 4 sided faces. Then, after some time, I need to merge these two faces, so I use Merge Face tool, but after faces are merged, vertexes on 2 edges of that face remain (they marked the start and the end of the split line).
Now how do I get rid of these vertexes? I tried simply moving them to the nearest corner, but if I do this, they do not merge with corner vertex, they only sit on top of each other. It becomes difficult to later alter them, and commands like ConvertToSolid do not work anymore.
So how do I delete or merge vertexes? (simply pressing Delete key while vertex is selected deletes edge and nearest faces).
Attaching screenshots.
The face I'm going to split:
1.jpg
Faces after splitting:
2.jpg
Vertexes that remain after merging faces:
3.jpg
These vertexes in center (on edges) are the ones I need to get rid of.
Would like to be able to select mtext explode it get x y coords of last line of text then turn it back to mtext and then launch mtext at a @0,-0.5 justification TL width 5 and display the ribbon.
All seems to work except the (command ...)
Below is my attempt.
(prompt "Select Note")
(setq ss (ssget))
(command "explode" ss)
(setq ss (ssget "l")) ;get last line of text
(setq ent (entget (ssname ss 0))
ent1 (cdr (assoc 10 ent))) ;get x y coords
(command "undo" "1") ;set exploded mtext back to mtext
(setvar "lastpoint" ent1)
(command "mtext" "@0,-0.4" "j" "TL" "w" "5")
I create a polyline ,and then add it's objectId to a ObjectIdCollection defined by me.After the polyline is created,I would like to obtain it's second and sixth vertexes via this polyline's objectId.
View 6 Replies View RelatedI am having some trouble with moving vertexes on their local axis. When I move a vertex with the move tool (in local mode) the vertex moves REALLY fast and what is causing it. It works fine with the view coordinates enabled but just not on local.
View 2 Replies View RelatedYesterday I post the message "Exporting pline and text" which turned out to work realy well.
However I need something else...
I need to select several plines and export their vertexes (as it is already done) BUT I also need to select SEVERAL texts and export them as well as their insertion point coordinates.
I tried with the code below but without any success... It gives the error "; error: ActiveX Server returned the error: unknown name: "TEXT"" This happens after selecting some texts and hiting enter.
Here is the
(defun c:zi5 ( / f i o s ss obj objdata texto texto_f nomebase nome_zi tx1 iPt)(vl-load-com)(setq nomebase (getstring "
Enter name for file:"))
(setq nome_zi (strcat "D:" nomebase "_zi.txt"))
(princ "Select your plines...")
(if (and (setq s (ssget '((0 . "LWPOLYLINE")))) (setq f (open nome_zi "w")) )
[Code]...
i am trying to translate a Point coordinates from Paperspce to world coordinates in model space.The code i used in Land2006 worked OK but now in Civil3d 2012 it doesn't!
Private Sub GetPlais_Click()
Dim tmpnt1 As Variant, tmpnt2 As Variant, tmpPnt1 As Variant
Dim lole(0 To 2) As Double, upri(0 To 2) As Double
Dim returnobj As AcadObject
FrmGrid3.Hide
On Error GoTo Eline
ThisDrawing.Utility.GetEntity returnobj, tmpPnt1, "ÅðÝëåîå ôï ViewPort ðïõ èá äçìéïõñãçèåß ï êÜíáâïò!"
If TypeOf returnobj Is IAcadPViewport Then
[code]........
I'm a GIS analyst trying to learn Cad. I'd like to place a single point in autocad model space at a specific Northing/Easting position. After reading several forum threads I don't think CAD allows me to change the coordinate system of model space from map coords to northing easting coords, as we can in GIS.
View 5 Replies View RelatedIs there a way to draw sinusoidal line in max?
View 5 Replies View RelatedI try to make a mirror on a line.
I have put the pivot point in the 0 of the X axis. The pivot point are also align with the world orgin.
When I apply the Mirror Modifier, my new line are not in the same axis that the source line. I have try reset transform, etc...
The coordinates that we can apply in Revit (project/shared) aren't exactly the same to have real world projection coordinates (WGS84)??
If not how can we convert the revit shared coordinates to real world projection coordinates?
I would like to clone a cylinder along a Line, but not with a linear spacing between the cylinder, but center on the vertex of the line (see image).I have trying with the spacing tool, but I can't do that I want...
View 4 Replies View RelatedI have two line edges that cross but need a vertex at that point where they intersect. The lines are on different objects. How would I create one? I imagine this comes up quite a lot but it seems really difficult to do.
View 1 Replies View RelatedI need to form a line/lines with thickness on the surface of a sphere as seen on the attached image. I also want to apply transforms to the line while keeping it stay on the surface. How can I do that?
View 9 Replies View RelatedI'm not able to locate the function that moves the vertices of a object squarely on the zero-line.
Basically I am modeling a half a head and using symmetry mod for the other half. I just want a clean half model with all the verts line up at the mid-line.
Win7 Pro 64bit
I7 3680 6 core 12MB cache w Corsair H80 liquid cooling
ASUS P9X79
32 GB DDR3
NVidia Quadro 5000
3TB WD
As CAD administrator at my company, which is in the process of implementing Inventor/Vault, I am quite sold on the Layout Modeling/Multi-body part modeling functionality that Inventor supports. Among other things I believe there is a large payoff in assembly stability and simplicity. However, this workflow is very different from the conventional methods of modeling individual parts and manually constraining assemblies. URLs....
View 8 Replies View RelatedHow best to make the stone facets go sideways into the main tower. As you can see though it doesn't make a whole lot of sense. How I could achieve such results?
View 1 Replies View RelatedHow can i make this chair part nurbs or poly modeling?
View 4 Replies View RelatedI am fluent in sketchup modeling but have had no success in attempting to model something similar to the crinkled wall mass in the attached image. I have d/l'ed 3dsmax for 30 trial and trying to learn on the fly, which is difficult. before i spend too much time trying to to achieve a crinkled wall mass? in my first attempt i was able to create a rectangle, add modifer of garment maker and apply cloth attributes (and ripple) to it but it's too smooth around the edges although it had amplitude to it.
View 9 Replies View RelatedI have a problem when I am modeling my character or rather the character from the animation academy. I have created an NURBS sphere and I want to adjust it to the arm, so I go to the component mode add some isosparms and then it happens!!! I can´t move any vertexes... but in the object mode I can move the hole object.
View 1 Replies View Related