I have two line edges that cross but need a vertex at that point where they intersect. The lines are on different objects. How would I create one? I imagine this comes up quite a lot but it seems really difficult to do.
View 1 RepliesI'm using 3ds max 2012. this problem appear when i send object from 3dsmax to mudbox.
View 2 Replies View RelatedDoes SDK have two line Intersect Point?
View 3 Replies View RelatedI'm having a problem with Maya's vertex/point snapping function. This is a simple thing to do normally but in the 2014 student version (which is full functionality other than having a prompt saying it is a student version upon saving the file), it isn't working.
Basically the process is making a selection of vertices and with the transform tool active, MMB dragging the manipulator to snap the selection to a destination vertex. The pivot point/manipulator of the selection is moving and snapping to the destination vertex on it's own when I hold 'V' and MMB drag, rather than the whole selection moving with the transform manipulator and snapping to the destination vertex. This problem is also happening with the modelling toolkit which is really annoying. I have checked that i'm not in edit pivot mode etc.
The point snapping is working however for objects, but not in component mode as above.
I am running Windows 7, Maya SP2.
I would like to clone a cylinder along a Line, but not with a linear spacing between the cylinder, but center on the vertex of the line (see image).I have trying with the spacing tool, but I can't do that I want...
View 4 Replies View RelatedWhen joining 2 pipes (cylinders) how do you get a radius/fillet where the 2 pipes intersect? How can you control the radius size? Attached is a 2010 version and 2013 version MAX file. piperadius.zip
View 2 Replies View RelatedI have a drawing which consists of lines and blocks. I need to write down the (x,y) coordinates of each point of my interest. I expect results to be copy-paste'able, text or plain text preferred.
How should I do that? I guess there is a build-in command for this, I fail to Google it though.
I keep getting this message. I know others have posted about it- but back int 2006 [URL]. The referenced link showing the solution is no longer available.
I read on an archived blog somewhere that is was a glitch in autocad2005. I am running 2010- so I don't get it. I really need to extrude these plines
I'm trying to snap a head with it's neck with the merge edge tool, but somewhere along the way, the edges lost there border edge characteristics and now I can't merge the edges. Is there a way to make the edges back to the way they were?
View 1 Replies View RelatedI have a vertex that is a connection point to several edges. Now, how do I split the vertex into several so every edge has one? Is there such a function? Or do I need to instert them manually?
View 1 Replies View RelatedI would like to move two different vertex, from different mesh, at the same place. I thought maybe I could put a guide or a landmark to the position I want the vertexes to be. I can't find anything about guides in 3ds max
View 2 Replies View RelatedI would like to know if it's possible to set a value to a multiple vertex selection.
Exemple : I have 15 vertex selected with different values on z axis.
I want to set all vertex to -100mm for exemple (in one action).
I am polymodeling and want to restrict a vertex to moving only along one of its corresponding edges. Seems like there was a drop down for this but I am totally missing it right now.
Max 2009 SP1 x64
i can´t let just one vertex, i must always let 3 vertex at last, otherwise it won´t delete, i have even problems when extruding, when I select 1 vertex, instead of extruding just 1, it will create 2 or 3 vertex, probably to make a face.
View 4 Replies View RelatedI am trying to weld two vertex's together but they just won't budge. Yes the vertex counter says "2 Vertices Selected" and yes i am presses the "Weld" button and yes i have tried to use "Target Weld" and that did not work ether. And the 2 Vertices belong to the same object so it is not possible to use the "Boolean" Feature of 3ds max because the objects would have to different to use the "Boolean" Feature but in my case they are within the same object. So what do i do now? I have exhausted all the ideas and thoughts that i could possibly try. The only thing that i can think of right now is that that 3ds max 7 won't weld because one of the Vertices belongs to a closed face. Or is there a script that overrides that feature?
View 3 Replies View RelatedI have a high res model and Im building a low res one on top of it. I'm trying to constrain the movement of a vertex of the low res model to the surface of the high res model. How can I do that in Max 2012?
View 3 Replies View Related ok so i have a face, that is looking eyes, left, and i need to make a morph for it with its eyes right, i cant just rotate the eyes becuase the geometry is all attached,...
in my thinking i came up with a solution that i swore would work, i just put a symmetry modifier on my mesh, and then detached the oppoite side, so that now i have two meshes.. one with eyes left, and the one derived from the symetry modifer eyes right,.. i collapsed them both so that they would be edit polies, and then applied eyes right as a morph target....
it does not work,... the symetrey modifire seems to reorder the vertex numbers or something like that.. becuase when i try to putt the morph to 100 the face implodes and reverses... so my question is.. is there a way to just make the mesh turn from eyes left to eyes right without having to use the symmetry modifier????
I've got a problem with a vertex on my model. When I go into the skin modifier or edit poly, this one vertex doesn't seem to exist. It doesn't show up and I cannot move it, yet in the skin modifier it is being affected by something. How can I get this vertex to reappear without completely borking my model's skinning?
View 1 Replies View RelatedI find the intersected point of Line and block as this 'bref is a block referenceDim tmpLine As New Line(pt1, bref.Position)Dim ptCol As New Point3dCollectionbref.IntersectWith(tmpLine, Intersect.OnBothOperands, ptCol, 0, 0) Dim acLine As New Line(pt1,ptCol(0))But the intersected point is not located on block as picture below. I don't know what happen.
View 3 Replies View RelatedI'v created my shape, snapped the vertex but cannot combine them to other sides, so when i go to smooth the shape it shows the disconnected edges/vertex...I'v attached a screen shot to show you the edges i mean (circled).
View 2 Replies View RelatedI have read that this feature was removed(??) in 2011. How to do it in 2012?
Use Axis Constraints is ON in the Grid and Snap Settings but when i hoover over the vertex the snap goes away and a small circle shows up. When i click the vertex and drag it the axis constraints are turned off. I use the vertex snap all the time.
Just noticed this (first use of Max in a few days) so not sure what is going on, but any type of vertex (smooth, bezier, etc.) does nothing to change any vertex but they all remain corners. I get bezier handles and moving them apart moves the handles but does not change the shape of the lines going into the vertex.
View 4 Replies View RelatedI'm modelling a character and I created the neck and now I want to connect it to the head but the problem is, he only allows me to weld some vertex, it's like he doesn't want both elements to share a edge or face, only vertex!(and yes, I attached the two elements).
when I want to create a face with those vertex he says: "illegal face" or something.
In sub object mode, I have some vertex selected, I would like to set this vertex to a specific position in space.
For exemple, In the picture attached, I want that each 4 vertex set to 0 in x position in one command (I don't want set to 0 individually each vertex).
I've been using Maya for a little while, and have often found manipulating vertices frustrating.
The problem is that - as far as I can tell - I need to select a vertex before manipulating it. This is annoying because I have to click a vertex and then click and drag it again to actually move it (not so easy on a tablet). Also, if I'm off by even a slight amount, I click the object instead and I pop out of vertex selection mode and back into object selection mode.
I could simply click once and drag to move vertices and if there was no vertex under my mouse when I clicked, I wouldn't accidentally select an entirely different object.
I'm wondering how to change a control vertex on a curve to a bezier corner. It's a corner right now and I need the handles to edit the shape.
Windows 7 Pro 64-bit
3Ds Max 2013
Maya 2013
Mudbox 2013
Core i7 920 Quad Core 2.66 GHz, 6 GB RAM
EVGA GeForce 550 ti (2x)
ROG Rampage II Extreme Motherboard
I'm using Maya 2010. why this is happening, and how to fix it? I have a piece of polygonal geometry. I have confirmed all the culprit vertices are on the zero X axis.
But when I mirror it (-X), it collapses the 5 vertices at zero to a single vertex at the center, as shown in the "after" image:
I have problem when i duplicate polygon another side of model. The object is not smooth, it look like different model. I try to "combine" and "mesh" vertex from middle of object. but it still same. The polygon will smooth if i use "smooth tool". But i need low polygon for transfer map from high polygon to low polygon. but it not work, because low polygon look like different model.
I need smooth low polygon, but not to much smooth. I need only when i duplicate polygon, it not look like different model is okay.
The green line is parallel with the blue line. I want to move the green line upwards until its endpoints intersect with the two red lines.
View 9 Replies View RelatedI would like to know if there is any way to detect if selected point of the selected polyline is its vertex?
1. The user is drawing rectangle or any other figure with polyline.
2. Entering command "GetMe".
3. Selecting polyline.
4. Selecting point.
Is there any built-in function in Autodesk's API?
Whenever I try to select a Curve to select 'Control Vertex' I get the options for the Camera instead, the only work around I have is to Hide the Camera which also switches off the image planes, then select the curve and select 'Control Vertex, and then re-enable the image planes.
View 2 Replies View Related