I am polymodeling and want to restrict a vertex to moving only along one of its corresponding edges. Seems like there was a drop down for this but I am totally missing it right now.
Max 2009 SP1 x64
can I snap an object/vertex/edge to another object straight in one axis?
I'm coming from Rhino 3d, where this is possible by holding the shift key.
3ds Max 2012 SP2
i7 2600
16GB RAM
Geforce 560ti OC
I need to have a symbol with it's own timeline play at the end of each slide in a slideshow. I have the animation for the slideshow but when it comes to the first symbol, all the symbols load instead of just the one needed for the slide. I have tried setting "play from" but that seems to refer to the symbol timeline not the stage timeline. All symbols are set to "hide" upon click.
The real problem comes when playing in reverse. The symbol plays first with "hide" feature but does not continue the reverse animation from the stage since the "hide" feature stops the action.
I have a vertex that is a connection point to several edges. Now, how do I split the vertex into several so every edge has one? Is there such a function? Or do I need to instert them manually?
View 1 Replies View RelatedI would like to move two different vertex, from different mesh, at the same place. I thought maybe I could put a guide or a landmark to the position I want the vertexes to be. I can't find anything about guides in 3ds max
View 2 Replies View RelatedI would like to know if it's possible to set a value to a multiple vertex selection.
Exemple : I have 15 vertex selected with different values on z axis.
I want to set all vertex to -100mm for exemple (in one action).
i can´t let just one vertex, i must always let 3 vertex at last, otherwise it won´t delete, i have even problems when extruding, when I select 1 vertex, instead of extruding just 1, it will create 2 or 3 vertex, probably to make a face.
View 4 Replies View RelatedI am trying to weld two vertex's together but they just won't budge. Yes the vertex counter says "2 Vertices Selected" and yes i am presses the "Weld" button and yes i have tried to use "Target Weld" and that did not work ether. And the 2 Vertices belong to the same object so it is not possible to use the "Boolean" Feature of 3ds max because the objects would have to different to use the "Boolean" Feature but in my case they are within the same object. So what do i do now? I have exhausted all the ideas and thoughts that i could possibly try. The only thing that i can think of right now is that that 3ds max 7 won't weld because one of the Vertices belongs to a closed face. Or is there a script that overrides that feature?
View 3 Replies View RelatedI have a high res model and Im building a low res one on top of it. I'm trying to constrain the movement of a vertex of the low res model to the surface of the high res model. How can I do that in Max 2012?
View 3 Replies View RelatedI'm using 3ds max 2012. this problem appear when i send object from 3dsmax to mudbox.
View 2 Replies View Related ok so i have a face, that is looking eyes, left, and i need to make a morph for it with its eyes right, i cant just rotate the eyes becuase the geometry is all attached,...
in my thinking i came up with a solution that i swore would work, i just put a symmetry modifier on my mesh, and then detached the oppoite side, so that now i have two meshes.. one with eyes left, and the one derived from the symetry modifer eyes right,.. i collapsed them both so that they would be edit polies, and then applied eyes right as a morph target....
it does not work,... the symetrey modifire seems to reorder the vertex numbers or something like that.. becuase when i try to putt the morph to 100 the face implodes and reverses... so my question is.. is there a way to just make the mesh turn from eyes left to eyes right without having to use the symmetry modifier????
I've got a problem with a vertex on my model. When I go into the skin modifier or edit poly, this one vertex doesn't seem to exist. It doesn't show up and I cannot move it, yet in the skin modifier it is being affected by something. How can I get this vertex to reappear without completely borking my model's skinning?
View 1 Replies View RelatedI'v created my shape, snapped the vertex but cannot combine them to other sides, so when i go to smooth the shape it shows the disconnected edges/vertex...I'v attached a screen shot to show you the edges i mean (circled).
View 2 Replies View RelatedI have read that this feature was removed(??) in 2011. How to do it in 2012?
Use Axis Constraints is ON in the Grid and Snap Settings but when i hoover over the vertex the snap goes away and a small circle shows up. When i click the vertex and drag it the axis constraints are turned off. I use the vertex snap all the time.
I would like to clone a cylinder along a Line, but not with a linear spacing between the cylinder, but center on the vertex of the line (see image).I have trying with the spacing tool, but I can't do that I want...
View 4 Replies View RelatedJust noticed this (first use of Max in a few days) so not sure what is going on, but any type of vertex (smooth, bezier, etc.) does nothing to change any vertex but they all remain corners. I get bezier handles and moving them apart moves the handles but does not change the shape of the lines going into the vertex.
View 4 Replies View RelatedI'm modelling a character and I created the neck and now I want to connect it to the head but the problem is, he only allows me to weld some vertex, it's like he doesn't want both elements to share a edge or face, only vertex!(and yes, I attached the two elements).
when I want to create a face with those vertex he says: "illegal face" or something.
In sub object mode, I have some vertex selected, I would like to set this vertex to a specific position in space.
For exemple, In the picture attached, I want that each 4 vertex set to 0 in x position in one command (I don't want set to 0 individually each vertex).
I've been using Maya for a little while, and have often found manipulating vertices frustrating.
The problem is that - as far as I can tell - I need to select a vertex before manipulating it. This is annoying because I have to click a vertex and then click and drag it again to actually move it (not so easy on a tablet). Also, if I'm off by even a slight amount, I click the object instead and I pop out of vertex selection mode and back into object selection mode.
I could simply click once and drag to move vertices and if there was no vertex under my mouse when I clicked, I wouldn't accidentally select an entirely different object.
I'm wondering how to change a control vertex on a curve to a bezier corner. It's a corner right now and I need the handles to edit the shape.
Windows 7 Pro 64-bit
3Ds Max 2013
Maya 2013
Mudbox 2013
Core i7 920 Quad Core 2.66 GHz, 6 GB RAM
EVGA GeForce 550 ti (2x)
ROG Rampage II Extreme Motherboard
I have two line edges that cross but need a vertex at that point where they intersect. The lines are on different objects. How would I create one? I imagine this comes up quite a lot but it seems really difficult to do.
View 1 Replies View RelatedI'm using Maya 2010. why this is happening, and how to fix it? I have a piece of polygonal geometry. I have confirmed all the culprit vertices are on the zero X axis.
But when I mirror it (-X), it collapses the 5 vertices at zero to a single vertex at the center, as shown in the "after" image:
I have problem when i duplicate polygon another side of model. The object is not smooth, it look like different model. I try to "combine" and "mesh" vertex from middle of object. but it still same. The polygon will smooth if i use "smooth tool". But i need low polygon for transfer map from high polygon to low polygon. but it not work, because low polygon look like different model.
I need smooth low polygon, but not to much smooth. I need only when i duplicate polygon, it not look like different model is okay.
I'm having a problem with Maya's vertex/point snapping function. This is a simple thing to do normally but in the 2014 student version (which is full functionality other than having a prompt saying it is a student version upon saving the file), it isn't working.
Basically the process is making a selection of vertices and with the transform tool active, MMB dragging the manipulator to snap the selection to a destination vertex. The pivot point/manipulator of the selection is moving and snapping to the destination vertex on it's own when I hold 'V' and MMB drag, rather than the whole selection moving with the transform manipulator and snapping to the destination vertex. This problem is also happening with the modelling toolkit which is really annoying. I have checked that i'm not in edit pivot mode etc.
The point snapping is working however for objects, but not in component mode as above.
I am running Windows 7, Maya SP2.
I need to define a mate constraint with a workplane as EntityOne and a midpoint from an Edge as EntityTwo.
API-Help tells me valid objects are planar faces, linear edges, vertices, cylindrical faces, conical faces, spherical faces, revolved faces, work planes, work axes, and work points.
The Edge object gives me StartVertex and StopVertex, but what about the midpoint?
I have drawn this part and can't find a way to... not even sure how to describe it.I need to replace the yellow edge by the green one.
View 2 Replies View RelatedI have a character I have been working on for a while. All of the sudden when I try to extrude an edge, target weld switches to vertex and does not weld. Target weld is greyed out under edit meshedges.
I did play with some UVW unwrapping, but have removed that.
Whenever I try to select a Curve to select 'Control Vertex' I get the options for the Camera instead, the only work around I have is to Hide the Camera which also switches off the image planes, then select the curve and select 'Control Vertex, and then re-enable the image planes.
View 2 Replies View RelatedUsing 2010. I'm trying to move an edge on the Z axis, but for some reason it refuses to go that way--nothing happens when I try dragging it down, and dragging it up causes it to go forward on the Y axis. This happened when I pressed something wrong on my keyboard I think. Resetting, restarting the program, etc doesn't work.
A few questions:
- How do I fix this?
- How did this even happen? When I Google ways to lock vertices/edges/etc, people are saying it can't be done.
I cant solve this problem with edge selection tool, my task is to create an oil barrel and when I select the barrel with edge selection tool then press setting button next to connect there is that triangle pattern in between two lines that I don't want, how do I get rid of it?
View 7 Replies View RelatedIs there a way to bevel a edge like in the first screenshot with more than one segment without getting those marked n-gon faces shown in the second screenshot. i've been playing around with all the settings of the bevel tool but i always get those faces that i dont need and have to delete manually.
View 1 Replies View Related