I find the intersected point of Line and block as this 'bref is a block referenceDim tmpLine As New Line(pt1, bref.Position)Dim ptCol As New Point3dCollectionbref.IntersectWith(tmpLine, Intersect.OnBothOperands, ptCol, 0, 0) Dim acLine As New Line(pt1,ptCol(0))But the intersected point is not located on block as picture below. I don't know what happen.
View 3 RepliesDoes SDK have two line Intersect Point?
View 3 Replies View RelatedThe green line is parallel with the blue line. I want to move the green line upwards until its endpoints intersect with the two red lines.
View 9 Replies View RelatedI have two line edges that cross but need a vertex at that point where they intersect. The lines are on different objects. How would I create one? I imagine this comes up quite a lot but it seems really difficult to do.
View 1 Replies View RelatedI'm in the process of selecting the head and shoulders of a person and got about 2/3 rds of the way around which took me a long time when somehow the end of the line I was working shot across and made connection to the beginning point which ended my selection process. Maybe I clicked too fast or something but it happened and now I'm left with part of a head and shoulders selected.
I've tried working with the plus and minus to try eliminate the line that shot across but I'm not having any luck, maybe it can't be done.
When I try to add or subtract it won't let me intersect the original selection line, I mean I can use a place on the line to anchor my starting point butwhen i come back to the original selection line at some other point, it's not showing the the little circle indicator that tells me I've completed the selection.
Im having some troubles inserting a block into a line. See image. The block on the left inserts into the line and has attachment points (AutoCAD P&ID Provided) the block on the right i created. Im unable to get it to insert within the line without manually breaking the line after insertion, the result being the line through my block.
[URL]
Is there a way to make one viewport supersede another so that say parts of the first viewport dont cross over into the second (not enough room). I have one intial viewport. Then four other viewports which are scaled in portions of the inital. I want the scaled in viewports to supercede images from the initial so that there are not parts of the intial intersecting into the "zoomed" in viewport pictures.
View 9 Replies View RelatedHow do I extend a line to a block or trim? seems like every time i trim or extend the line to a block the line won't recognized/notice the block. what can i do?
View 1 Replies View RelatedIs there a way to set up autocad(2004) so that when I insert a block, the block then automatically breaks the line I am inserting it on. My drawing's are mostly electrical schematics so the line I am refering to is the circuit and my blocks are components. At the moment I insert my block and I have to use the command 'break'. I know this does not take up a lot of time but I am always looking for ways to speed up!
View 8 Replies View RelatedI know I should know this, but can't seem to get it to work.
I have two ~parallel feature lines about 250' apart. I grade the Easterly Ft Line going west at a +1.5%, and I grade the Westerly Ft Line going east at a -2.00:1 slope.
I know C3D doesnt have a tool to intersect them, I must use the intermediate surface approach.
What I did was grade one, create 'Paste Surface 1' then grade the other, create 'Paste Surface 2' and then I created Surface 3 and pasted 'Paste Surface 1' and 'Paste Surface 2' into Surface 3.
Throughout I used 'Grade to Distance'
Surface 3 doesn't come out correctly.
Windows 7 x 64 bit
NVidia Quadro K3000M Dual Monitor
32.0 GB RAM
Intel Core i7-3820QM @ 2.70 GHz
Civil 3D 2013 SP 2
I am wondering if there is a function that takes two lines that are not parrallel and will extend them until they intersect?
View 9 Replies View RelatedI am running into an issue when two viewports intersect. Typically the drawing is just a standard single viewport but I have a certain couple instances (drawings for a special part of the report) where I have made smaller viewports that overlap with the larger. Where they overlap as most know you can see the objects from the underneath viewport in the overlapping. I had been described a technique of clipping it away but being that this is only used in few circumstances I was looking to operate this more of a "Toggle" like option. I have assigned the "Viewport Frames" on a seperate layer in which can be toggled "ON" and "OFF" using the MVIEW on the frames to apply or unapply the viewports. But when I toggle off the viewports the clipping has removed the portions of the underneath viewport (as it should). Any way to tell AutoCAD that when two viewports intersect the top one is not transparent of whats underneath??
View 2 Replies View RelatedI'm a bit perpplexed about a very simple grading scenario: intersect the daylighting of two gradings as shown in the screen capture. I would like a solution that is dynamic to changes in either of the 2 gradings.
The intended result is in the 3D PDF.
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
I have a block in which the line weight is 0.20mm...how do i change the block lines weight to 0.50mm & 0.75mm.
View 1 Replies View RelatedHow to get the “text” or “block” parallel to a particular line?there is more than one way to alight the text with a particular line but wondering if there might be more powerful tools to do so.
“Rotate” and “Align” are possible commands to align the text with particular line. Parallel constrain is another option to do so but will make the drawing “busy” with additional parameter.
Equally, what if I need to make a block parallel to a particular line? In this case, the “parallel constrain” doesn’t work! Just I may take the advantage of “rotate” and “align”..What I wanted to know if there is a more brilliant way to get the“text” or “block” PARALLEL to a particular line with a smart tool.
How to capture the real point of a line within a block?
I used the following method to captured some entities from a block.
I need the point of the entities, to redesign a dimension.
But if I move the original block, and then run my program. The dimension is redesigned in the original location of the block.
Basically the code looks like this:
private void FilterDimension() { TypedValue[] typedValue = new TypedValue[2]; typedValue.SetValue(new TypedValue((int)DxfCode.Start, "INSERT"), 0); typedValue.SetValue(new TypedValue((int)DxfCode.LayerName, "Dimension"),
[Code].....
I would like to make a block with 2 points and I would like them to follow a line with those 2 points..
Same as you can use the measure command to put blocks on a line with a pitch distance I would like to do the same but the block schould snap with 2 points on the line.
How to Jig multiple entities such as insert a block and add a line.
View 3 Replies View RelatedI have a block with 10 rectangles in each with 3 lines of text. Each 3 lines of text is attributed to a tag
so the first line is IN-0 DESC1,
second line is IN-0 DESC2
third line is IN-0 DESC3
I have deleted the data from
IN-3 DESC1
IN-3 DESC2
IN-3 DESC3
and i want to move the data from
IN-4 DESC1
IN-4 DESC2
IN-4 DESC3 etc
up to the position of
IN-3 DESC1
IN-3 DESC2
IN-3 DESC3
can this be done?
other wise i will have to click on
IN-4 DESC1 cut the data then open up IN-3 DESC1 and paste it then repeat for
IN-4 DESC2 cut the data then open up IN-3 DESC2 and paste it then repeat for etc
Having issues with multi line attributes in dynamic blocks. On the odd occasion I get the attribute moved for example i use multi line attribute for title block information and sometimes it moves where i don't want it .
View 0 Replies View RelatedI'm using the Intersect With method with two pipes. The Intersect With method doesn't appear to work with curved pipes if the pipes do not cross. If they don't cross the method works, but if they don't then it doesn't find the intersect points properly. This appears to be an issue with Civil 3D 2010 to 2012 API.
[URL]........
In the screen cast image the pipe on the right finds the intersection point with the straight pipe on the left, but not the curved pipe that is in the middle. I've had poor results trying to put in support requests for API related issues.
For Civil 3D 2010 here's the code that isn't working:
oPoints = new Point3dCollection();
Pipe oLateral = (Pipe)lateralObjId.GetObject(OpenMode.ForRead);
Pipe oMain = (Pipe)mainObjId.GetObject(OpenMode.ForRead);
oLateral.IntersectWith(oMain, Intersect.ExtendThis, oPoints, 0, 0);
I have a problem while executing intersectwith between polylines and lines
the polyline execute intersectwith method referencing a line object with expandboth parameter value but sometimes , the intersection is not found
when using expandthis or expandargument values, I have no problems
I'am using VS2012 express and Autocad 2014
the attached project containt :
an image (result;png) showing my result
a dwg file (dessin3.dwg) , it is my test file
the source code for testing , (test" command)
it find all polylines and all lines in the drawing , compute the intersections between each couple and draw a dbpoint on each
I have created the model in the picture in AutoCad, but I do not know how to create it in Inventor. In Inventor I Know how to extrude and draw 2d/3d sketches, but this simple model it is impossible to me.
It is a simple 3D part, no sheet metal or pipe. It is an structure. I have copied it sliced to make more clear the geometry that I am looking for create.
how i can break multiple lines where they intersect, I have done research on Qbrick but cant seem to download one that works
View 1 Replies View RelatedI have 2 polyline. First I need to know whether those 2 polyline intersect with each other or not. If they are I need to change one of the polyline shape deduct the intersection area.
How can I do that?
I have a drawing which consists of lines and blocks. I need to write down the (x,y) coordinates of each point of my interest. I expect results to be copy-paste'able, text or plain text preferred.
How should I do that? I guess there is a build-in command for this, I fail to Google it though.
I am using Civil3D 2012 SP 2.
I am creating a block for my details. I want to be able to title my block and the the line under my txt will change it's length based on the lenght of the text. I keep playing with the constraints, but I haven't found one that is doing what I want.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
we have a rectangle 0,0 - 200,100 with a triangle inside 0,0 - 100,100 - 200,0
[/] <- for example
A dynamic stretch action is applied to the x of the rectangle, how do you scale/stretch the triangle with the rectangle and only on the x axis, so the triangle remains symmetrical from the middle of the rectangle on the y axis even when the rectangle is stretched?
Looking for a solution that doesn't involve inserting the block and scaling?
I want to paste one block on polyline or line with specified space interval as per attachment. How to do?
View 3 Replies View Relatedis there a way to extract a 3D poly line where two surfaces intersect each other.
i have ground surface and i have dam surface. they would like to show the filler material in the cross section graph.. so i copied then raised the surface the required depth.
so now the surface and side slope of the dam intersect. and i would like to trim the filler material surface to be in line with the dam.
I need to determine intersection points between Alignment and Parcels.
In .NET I haven't Parcel object and in COM IntersectWith function doesn't work.