I have a diamond model I built (editable poly) and it is sitting on a pillow I made (garment maker, cloth- also editable poly) Ok so there has got to be an easy way to make the diamond sink into the pillow. I have been playing around with conform space modifier for hours now and I can make basic shapes change but it will not effect my ed polies and also I dont know if this is working the way I imagined anyway.
View 1 RepliesIs there a way to conform an object (with a thickness) to an editable poly surface, like you can with patch deform to a patch surface ? I know you can use the compound object 'conform', but that does not give the result I'm looking for.
I was hoping that is was possible to simply convert an editable poly surface to a patch surface, but then I just get "illegal surface" when I pick the deform surface.
Patch deform is great, but almost worthless if I can't use it for editable poly objects...
A simple editable mesh object, a piece of terrain, which has standard texture on it an no modifiers, just some UV's on channel 1.
Whenever I add "edit poly" modifier or convert it to editable poly, additional geometry will be created. Statistics show that only vertex count of the selected object goes up about 6x but no additional faces are generated. This not the case when check on a sub-object level, there are lot of additional faces created. I've never seen this happen, jumping between edit poly and edit mesh has been easy without any errors like this.
I've tried the same model with 2013 as well - same results. Also tried collapsing the object, removing uv-mapping, different materials, attaching the mesh to empty box, etc, garbage collection, exporting it to obj and importing - even then same thing happens.
Is there a way to recall a editable poly set and or a uvw map? It seems like I have to always re select them if if i want to modify a map.
Here is what I dont get, I have a box converted to an editable poly. With all of the polygons (faces) selected on one side, I assign a uvw map and successfully assign a map.
So I proceed to the top of the box and repeat the process and what? The entire cube takes on my "assign material to select" and I only have the top faces selected. What the heck is going on here. This is happening in 2013 and also 2012.
I don't know how to add segment in editable poly.
View 2 Replies View RelatedAfter performing a cut, how to create a polygon from resulting edges? Take a look at the this clip for details: [URL].......
View 5 Replies View RelatedFor an example if I create a sphere, add a turbosmooth with 4 itterations and collapse it to an editable poly again. Then when I try to manipulate the mesh by draging vertices with or without soft selection or paint deformation I get around 10X faster performance with direct3d (roughly 40-50 fps compared to nitrous 4-5 fps).
I know that nitrous is slow with pflow and animation but I did not expect it to have such poor performance with modelling?!
I have the same effect on both of my workstations. Laptop with core2 quad extreme, 12 gig ram, quadro fx3700m, win7 x64. Dells latest graphics driver. Stationary computer with Xeon quadcore, 14 gig ram, geforce 285 gtx card and win xp 64. Latest nvidia driver.
I cant solve this problem with edge selection tool, my task is to create an oil barrel and when I select the barrel with edge selection tool then press setting button next to connect there is that triangle pattern in between two lines that I don't want, how do I get rid of it?
View 7 Replies View RelatedI've been working on a tyre for a while. Now i need to model the side wall with some text on it. Because the tyre has to be printed in 3d i need this text as polygons in the model (not in a texture). So what is the best way to get a 3d text on my poly? It's very important to get an valid editable poly (from each vertice start 4 edges / an edge don't has 1 face on on side and 2 on the other ...).
View 3 Replies View RelatedI found to model a joystick. I have created a spline mesh, and applied a Surface modifier. The next step is to convert it to an Editable Poly. Fine, no sweat there. The thing is, when i do that, Max creates a ton more vertices; so many that its blatant over kill. My Surface mesh contains only 214 verts, but after conversion, i have over 6000.
Im guessing its adding some kind of smoothing somewhere...? After conversion, the tutorial has no more verts than it did before conversion, and it looks pretty much the same.
Conversion does not add extra vertices?
Intel I7 3.8Ghz, 8GB DDR3, SSD, nVidia 460, Windows 7 Ultimate x64
3DS Max 2011 Hotfix 4 x64
When you use the cut tool on an editable poly, and cut from one vert, across the polygon, to another vert, you often get an extra vertex. URL....Some other way of cutting? It seems like this bug has been in there forever.
View 7 Replies View RelatedI create a model use lib3ds ,and import into 3dsmax2010 ,when I convert the model to poly ,the model was flattened .
View 2 Replies View RelatedIs there a way to make an editable mesh or poly somewhat transparent when a material is applied? Think of the material being a thin cloth such as nylon. You can't see directly through it, but it isn't like a thick material such as jeans etc. I also want to make this object deform like a balloon inflating, so I don't know if that will cause issues with transparency.
View 3 Replies View RelatedWhen ever i do that i get an unexpected number of edges on an object.
View 1 Replies View RelatedIs there a way to extract the WHITE edges of this Editable Poly as Spline Shapes? Then I could use the Surface modifier to convert it to a Patch object.
I know there is a "Create Shape From Selection" button on in the Editable Poly dialog. But this gives me the ORANGE lines from the control cage, not the smooth lines on the subdivided object.
My model is ready for the rigging. But my model is a little heavy in poly-count. I can rig it now but at the time of animation i know it will be a problem while animating it. It will lag while moving its controls. I have seen people animating with low mesh and while rendering they use high mesh. Do, i have to create a low poly version of my model?. If yes, Then i have to paint weight twice. low poly one and the high poly one.
View 2 Replies View RelatedI'm just starting a new project and I've become a little stuck. What I'd like to do with Photoshop is to bend this (or another more suitable image) of a running track to fit:
a) the extrusion of the 3D type below or;
b) the road of the mountain pass
How would I go about doing this; is it something to do with creating paths and then warping it onto the path? I don't know quite where to start.
HOW to activate the little green dots?
I am trying to bend the blades (fans) to form a curve blade. However, I've failed again and again - unable to deform it.
For more information, please take a look at my dummy image and an image from the web (which I found). I am using Autodesk 2010. Or how to deform the blades from another version.
I am looking for a way to deform an object using splines, i know you could do it with a path constraint but i dont want it to travel along a path i just want to be able to deform it with a spline,
View 2 Replies View RelatedI have a small problem trying a wave to deform my objects properly. I have to make a "repulsion objects" project, i use several duplicate cubes and i apply to them a wave deformer. But i would like that the deformer could move just the entire objects or polygons , not the points because i want the upper face plane and the wave deform the points like i was making a jitter.
I have tested also the displacement direction of the wave with no results. Is there an easy way to make it?
I am trying to use a spline to deform hairs on a object.
I have 1 editable spline, with multiple splines attached to it(1 spline which has been rotated), but when I use it to comb the hairs, it will only take 1 or 2 of the splines, so it all goes in 1 direction, rather then all outwards from the center, like the splines are.
The splines are all the same, all in one shape, and all have the first vertex in the center.
I have tried re-creating the splines, but it comes out the same.
Is there any way to do collision deform with massfx cloth like you could in reactor? Like in this tutorial: [URL].........
View 2 Replies View RelatedThe MEIS document for 3ds max URL...., in the Compositing module talks about using the paint tool.. "demonstrate basic paint operations using the paint tool"
the object paint or object deform paint utilities? You cant actually "paint" 3D models using 3ds max can you? the reference they say to look up is "paint" and when I look this up in 3ds max help, the object paint and deform paint tools are all i can find.. So are these compositing tools?
Is there any way in photoshop or with a 3rd party plug-in to duplicate an object on a layer along a path so that it conforms to the orientation and possibly deforms accordingly? I'm working on a fish scale texture that has scales of varying size that flow in different directions depending on the location on the body. As of right now I've crudely grid warped a tiling fish scale matte I made to define how I want the scales to flow. I'm using this as a guide as I individually place each scale.
View 1 Replies View RelatedI want to do something similar to the "past into" command.. but i want the pasted image automatically deformed so that it contours the border of selection.
View 9 Replies View RelatedI have this minecraft rig which I downloaded from Shrogg2. I have added a few of my own features but wanted to add things to the facial rig. How the facial rig has been made but I have this plane which has stubble on it. I want it to be fixed in one location but follow the deformation of the jaw when it moves. The controller which is used to move the jaw down is already there, I just need to get it to deform this plane.
View 1 Replies View RelatedI’m trying to attach my deform text to my gear and make it permanent. what I was trying to do was get the text to curve and the only option I see that makes it curve the way I want it look is deform path is there another I can it I will post picture what I’m trying do and did see any video YouTube how to curve text
View 0 Replies View RelatedI've got a Mesh which consists of several Helixes with regular Tubes in between. They are all welded together, so it is one long Mix of Helix and tubes. In Animation, the amount of Turns in each Helix needs to be changed (from 0 Turns, up to 50 e.g.).
First I attached bones to each helix, but strechting the bones only leads to stretch the Helix - not reducing the Turns.
In another attempt, I took a regular Tube with a Path-Deform-Modifier and a helix-spline, so I had good control of the Mesh, by changing the splines-parameters. But since my Mesh consists of several individual helixes, I cant use it cuz i can only select 1 spline in the deformation-modifier.
i have 2 questions.
How i can give the line/bend funktion more points to deform it. Actually it have 4, but i need more for better deform the line/bend.
Any plugin that i can make other arrows? See the red arrows on the picture...
Uploaded with ImageShack.us
I am always having a great problem while modeling knees and elbows. Some people say put three loops on knee and some people say put 5??.. If i put too many loops then it collapse while deforming and when i put less then it won't deform properly...
I just want to Know is there any effective topology technique for knees to deform naturally and which should look realistic while the character is on squatting positions.
Please Check out the attached Picture.
Am trying to cut a circle into my geo but i cannot cut between vertex, its snapping to the vertex, and i currently don't have snapping on is their another option for the cutting tool somewhere?
View 1 Replies View Related