VideoStudio :: Can't Create Profile X5 And Windows 8
Nov 30, 2012
I upgraded my computer to Windows 8 from Windows XP with a clean install. I've installed VS X5 & SP1 on it. I now find I can't create a custom profile either by copying an existing one or building a new one from scratch. I think Windows 8 is protecting something but not sure.
Make Movie Template Manager
New
select Windows Media Video for file type and enter a name
Select Profile tab
Click Customize button on bottom
Now in Manage Profiles
select a profile then click copy
error message "The profile could not be saved. Restart the encoder and try again"
Try to create new profile upon saving error "Access is denied 0x80070005" then click ok then "An error has occured. If the error continues, consider reloading the session file, starting a new session, or restarting the encoder."Maybe this also happens on Windows 7 but I don't have that. This works fine on Windows XP.
View 3 Replies
ADVERTISEMENT
May 9, 2011
I have a new computer with Windows 7. I just loaded VS x2 with all the patches and extra content. I can create projects fine but when I try to "share" and create a disk nothing happens. I clock on the "create disk" button and a small square grey box appears next to the button but nothing else happends.
I have the most current Windows 7 drivers & updates and drivers for my disk drive. It worked fine in Windows XP.
View 3 Replies
View Related
Oct 9, 2011
I want to create a profile/wall style or what ever you want to call it for a raised deck flooring for external decking. I am looking at the decking material only. Not concerned about the timber framing sub floor material.
View 1 Replies
View Related
Jan 17, 2012
I am working C3D 2012. I have a proposed alignment and profile design by another firm that I had to tranfer into C3D. I had no problem getting the horizontal alignment to display from a text file. I tried to do the same with the profile by using the 'create a text file and create the profile from file' command. I got the POB, PI's, and POE to display. I then defined the VC. I wanted to verifiy that the profile was indeed accurate compared to what we were provided. So I tried to execute a profile report PVI Station and Curve Report - I keep getting an error that "No FG profiles in dwg".
I know the Proposed profile is indeed set to proposed in the properties. I have noticed that the icon next to the profile I create from the text file is different than the profiles created from scratch.
Is there a way to convert this profile to be recognized as a FG profile?
Intel Core i5-2500K CPU @ 3.30 GHz
8.00 GB
64-bit
View 9 Replies
View Related
Jun 28, 2012
The intersection wizard makes dynamic EOP profiles based off of the cross slope from the centerline. Well the intersection tool doesn't always work with funky intersection layouts. Is it possible to manually create a dynamic EOP profile based on the cross slope from the centerline profile?
Civil 3D 2012
Windows 7, 64 bit
View 1 Replies
View Related
Mar 17, 2011
We have an engineer who is taking an existing surface and wants to show a proposed road 2" higher than existing.
I told him to simply adjust his assembly for his corridor to account for the 2" difference, but the County agency needs to see a profile.
My questions:
1) Is there a way to easily copy a profile made from a surface and "convert" it to a proposed profile? If we copy and explode, it turns into hundreds (thousands?) of tiny pline segments and it would be a mess to convert all those to a profile 1 by 1. If we make the corridor, and choose "profile from corridor", we do not have an option that could be used to represent the centerline.
2) Other than loss of dynamic updating), would it make sense to adjust the assembly so the top surface would be accurate, then copy the profile, explode the copy to a block and simply shift that (as essentially basic linework)?
View 9 Replies
View Related
Feb 9, 2013
To the 2.8 users....
Where is the profile for Gimp 2.8 in Windows? I have the hazy memory that it's going to change to be available as part of the "Roaming" profile.
View 2 Replies
View Related
Jul 30, 2013
i have made a custom stroke width profile and want to back it up for future use i found two files called variablewidth or something but the date modified wasn't congruent to when i created the profile.
where can i find the files that contain this preset to back up?
View 3 Replies
View Related
Feb 11, 2013
Is there anyway to create a gap in AEC extended wall in 3ds max. I know to create a gap while using doors and windows. But I wish to create a gap without any doors or windows. I do not want to use proboolean also, because I need the properties of Walls too.
Is there any modifier to create proboolean? Can we create a curved wall using AEC extended wall?
View 1 Replies
View Related
Feb 16, 2013
I have a 5d mark 2, and I created a custom camera profile that is ideal for me, however when I shoot raw it only gives me the adobe, and camera standards etc. Is there a way that I can take my user setting on my 5d and transfer it into lightroom?
View 1 Replies
View Related
May 2, 2013
I notice in some of my postings and profile the occasional word has a hyperlink to advertising applied. It's not me doing this. Is it something the Forum software is doing?
View 3 Replies
View Related
Sep 13, 2012
, I have CS5, and a Sigma 15 - 50 lens.
If I want to apply lens correction in ACR thgere is a dropdown list of lenses, but my lens isn't included. presumably because it has been superceded by the 12 - 24.
So, is it possible to create a custom profile for this lens and save it for future use? if so how do I do this?
View 6 Replies
View Related
May 29, 2003
How can I create closed profile in VBA Suppose this profile includes Line and Spline See attached code in vb
Later I cannot create Extrude feature because previously created profile is open (consists of two separate curves)
How can I join together points in profile which belongs to separate curves to get one curve.
Dim t As Inventor.TransientGeometry
Set t = ThisApplication.TransientGeometry
Dim c As Inventor.ComponentDefinition
Set c = ThisApplication.ActiveDocument.ComponentDefinition
[Code].....
View 6 Replies
View Related
Sep 9, 2011
I'am trying to create profile from opening.I have found interesting method : Profile.CreateFromProfile.But every time i call this method "eInvalidInput" exception is thrown.
I am trying to call method like that:
Profile.CreateFromEntity(entity, Matrix3d.Identity);
View 1 Replies
View Related
Oct 25, 2013
I have used X4 for about two years and X6 for the past couple of months. I cannot figure out how the create more rendering options under Share -> Create Video File. For example, if I want to use the MPEG codec but a custom resolution. Often custom is greyed out and not selectable. In free software such as ffmpeg or Virtual Dub I can create video as any resolution, aspect ratio, or codec. VS options seem to be very limited to these prepackaged choices. For example, some people have described moving a .DLL to the Coral folder to get custom codecs under the Create Video -> custom option. I'd rather not have to always render in VS and then recodec in another software.
My biggest challenge is the new Instagram format. It is basically 640x640 webm format. But I can import MPEG h264 without issue. My goal is to setup a 1:1 640x640 profile so I don't always have to game and stretch titles to display properly in the final version.
View 4 Replies
View Related
Feb 22, 2011
A couple of years ago I bought VS 11.5 and had absolutely no problems with it. Two weekends ago, my computer (Windows XP pro) blew up - I have now installed it (VS 11.5) again on my new computer, which runs Windows 7. When I double click the icon to load it, the following warning box appears:
Cannot initialize the application. The screen resolution is too small to play the video. The screen resolution must be set to at least 1024 x 768. Followed by an "OK" box, which if clicked, gets rid of it.
Clicking START, CONTROL PANEL, DISPLAY, ADJUST RESOLUTION, it tells me that the resolution is 1280 x 960, both of which are greater than the minimum advised.
View 5 Replies
View Related
Dec 26, 2012
Do any of you know if Videostudio X5 is compatible with Windows 8? I currently have it installed on a Windows 7 system, and I am thinking about upgrading to Windows 8.
View 4 Replies
View Related
Dec 30, 2010
I just installed windows 7, and my good old VS 9 stopped producing sound. I tried the compatibility check, but that didn't do any good.
The very same V.S.9 worked fine with XP.
View 6 Replies
View Related
May 4, 2011
I HAVE THE SAME PROBLEM, BUT THE FIX IS NOT WORKING IN AUTOCAD 2012
View 2 Replies
View Related
Jul 15, 2013
is there a way to draw a line in the profile view and create that line into a feature line? and if there is can i project that line into the plan? i know that you can make a feature line in the plan and project that feature line into a profile view, just wondering if you could basicly do the reverse. i don't want to make a coridor.
View 4 Replies
View Related
May 7, 2013
How do I create a profile of a underground pipe if I have 4 top of pipe elevations that were surved in the field?
View 1 Replies
View Related
Jan 6, 2014
How can i create a profile using level data obtained from dumpy level with civil3D
View 3 Replies
View Related
Mar 22, 2013
I am working on a profile of a ditch and I want to create an enlargement of a portion of the profile. What I would like to do is shrink the vertical scale of the portion of the profile I want to focus on, creating what looks like a stretched view of the profile.
This can be accomplished by creating a block and shrinking the Scale X, but is there any way to do this feature with a viewport? (Creating a block of the profile isn't the solution, especially if I need to edit it later.)
If not with a viewport, is there any other way I can do this?
View 4 Replies
View Related
Dec 15, 2013
I have collected points across a 500m distance with easting, northing and height values. This line of points is measuring a stepped slope of a field.
I want, if possible, to create a profile (something that looks like a slice of the slope, so that the steps and profile of the slope is clear.
Can this be achieved? Will you be able to guide me through the process?
View 6 Replies
View Related
Jul 10, 2012
how (or if it is possible) to create a profile that contains mutliple segments. THe scenario I have is a proposed profile that ties to existing grade and then picks up again at existing grade some distance down the alignment.
The only way I can find to do this now is to create it all as one profile with no breaks and then go back and remove the profile segments in between the existing grad tie ins. Except when I remove a segment from my profile all of the labels beyond the first segment fo away.
In the past I have been creating multiple profiles but seeing as how long this surface alignment is and how many breaks in the proposed profile there are I would rather have just one proposed profile than several, especially when labeling existing/proposed elevations in the data band.
Here is an example before a segment is removed:
And here is an example after the segment was removed, the green labels are just polys and mtext not C3D entities
Civil 3D 2012
Windows 7 Service Pack 1
Intel Core i7-2600 CPU
16GB RAM
View 9 Replies
View Related
Mar 9, 2012
[URL]
It relates to machines which often have different users. I can get ACADM2011 to run for that user by editing the registry and importing keys from a good profile then modifying to user the new users credentials. This is Ok for a fudge fix but not suitable as a final solutions as I have to roll out 2011 to another 90 machines.
All users have full admin rights through a group policy so that is not part of the issue.
What I have noticed is that on machine which will work as expected the secondary installer runs in two steps. The first being the AutoCAD Mechanical 2011 install and then the language pack install. On machines which will fail and have the Profile issue only the language pack install runs. Where does ACAD look to check which causes this first install part to be skipped?
AutoCADM 2011 SP2
XP 32-Bit SP3
View 2 Replies
View Related
Nov 22, 2012
I need to create a wall the has a profile (in plan view).
View 1 Replies
View Related
May 3, 2010
I'm using video studio pro x3 and windows 7.
When trying to create a disc it opens dvd factory 2010 and does everything Ok but when I try to burn the project it gets about 95% through the burn process and fails. It seems like it is putting the files on but failing in the "writing lead out" phase. I've tried 3 different dvd burns to make sure that isn't the issue. I can create a file and then use nero to burn the disc fine but not when going through VS pro x3/DVD factory
View 14 Replies
View Related
Oct 19, 2010
I have used X2 for a couple years, but recently bought a new PC with Windows 7. I finished a project (successfully), then after finding and downloading the Windows 7 patches, I was able to burn the project. However, at some point roughly 5 minutes in, all the audio is ahead of the video by about a half a second, and remains that way for the remainder of the project. Watching the project in X2, it works fine, so it is a burn issue. I tried normalizing audio, but that doesn't work. It just seems like a software glitch.
View 4 Replies
View Related
Jan 1, 2013
I installed the 30-day trial version of VideoStudio Pro X5 (VSX5_Pro_TBYB.exe (1 431 816 336 bytes) from [URL] on my new Windows 8 laptop. Everything seemed to work fine until i started to experience problems with "hanging splash screen" during start-up. To solve this, I uninstalled VS Pro X5. Now, I am not able to re-install the software.
The installation seems to work OK until the EUL-screen. When checking "I accept the terms...", and pressing the Next-button, nothing happens.
I've tried (with no luck):
* Manually uninstalling/removing according to this
* Created a local new user and tried to install X5 on this
* Checking "zombie" security issues according to this
View 11 Replies
View Related
Sep 2, 2012
I'm having major problem with trying to record a screen capture. It's my first time trying corel videostudio. When I click record screen capture region the program minimizes but nothing else pops up and there is no frame on my monitor region. I've tried every compatibility mode, and it does the exact same thing. no recorder bar pops up.
windows 7 64
View 2 Replies
View Related
