AutoCAD Civil 3D :: Create A Profile With Multiple Segments?
Jul 10, 2012
how (or if it is possible) to create a profile that contains mutliple segments. THe scenario I have is a proposed profile that ties to existing grade and then picks up again at existing grade some distance down the alignment.
The only way I can find to do this now is to create it all as one profile with no breaks and then go back and remove the profile segments in between the existing grad tie ins. Except when I remove a segment from my profile all of the labels beyond the first segment fo away.
In the past I have been creating multiple profiles but seeing as how long this surface alignment is and how many breaks in the proposed profile there are I would rather have just one proposed profile than several, especially when labeling existing/proposed elevations in the data band.
Here is an example before a segment is removed:
And here is an example after the segment was removed, the green labels are just polys and mtext not C3D entities
Civil 3D 2012
Windows 7 Service Pack 1
Intel Core i7-2600 CPU
16GB RAM
I have a bunch of lines that are created with multiple segments. I'd like to annotate the total length. I can't figure out to do this without labelling each segment along the line using Line and Curve commands. How do I get one annotation that only shows the total of all the sements?
I just received a pdf containing a drawing that has been exported by autocad. The drawing consinsts in hundreds of segments.
Is there a way to recreate the drawing (at least the perimetr/bounds) easily? In coreldraw I select all objects and click effect>boundaries ... a new fillable (closed path) object is created on top of the existing segments. The new object reflect perfectly teboundaries of the selected boundaries.
Is there a way to do this in Illustrator (cc)? (similar to coreldraw create boundaries).
When we apply surface projection gradings to feature lines, we get locked vertices on the feature line wherever the grading transitions from cut to fill. In turn these vertices create segments in the feature line which influence any labels applied to the line. I don't want a bazillion segment labels on my FL. I only want segment labels between the physical vertices and elevation points. Is there a workaround or is an enhancement request in order?
I am working C3D 2012. I have a proposed alignment and profile design by another firm that I had to tranfer into C3D. I had no problem getting the horizontal alignment to display from a text file. I tried to do the same with the profile by using the 'create a text file and create the profile from file' command. I got the POB, PI's, and POE to display. I then defined the VC. I wanted to verifiy that the profile was indeed accurate compared to what we were provided. So I tried to execute a profile report PVI Station and Curve Report - I keep getting an error that "No FG profiles in dwg".
I know the Proposed profile is indeed set to proposed in the properties. I have noticed that the icon next to the profile I create from the text file is different than the profiles created from scratch.
Is there a way to convert this profile to be recognized as a FG profile?
The intersection wizard makes dynamic EOP profiles based off of the cross slope from the centerline. Well the intersection tool doesn't always work with funky intersection layouts. Is it possible to manually create a dynamic EOP profile based on the cross slope from the centerline profile?
We have an engineer who is taking an existing surface and wants to show a proposed road 2" higher than existing.
I told him to simply adjust his assembly for his corridor to account for the 2" difference, but the County agency needs to see a profile.
My questions:
1) Is there a way to easily copy a profile made from a surface and "convert" it to a proposed profile? If we copy and explode, it turns into hundreds (thousands?) of tiny pline segments and it would be a mess to convert all those to a profile 1 by 1. If we make the corridor, and choose "profile from corridor", we do not have an option that could be used to represent the centerline.
2) Other than loss of dynamic updating), would it make sense to adjust the assembly so the top surface would be accurate, then copy the profile, explode the copy to a block and simply shift that (as essentially basic linework)?
i need to transition from a proposed to a future linetype part of the way down my profile. It's the same surface, just that @ station XX+XX.XX it becomes future. I need it a diff linetype to faded back, for example. Is there a way to do that? I'm thinking my only option is two create two surfaces, one propsed and one future. My situiation currently is that I already have one complete surface and would like to know if it's possible.
I have a large number of profile views in Model space that I need to edit the Elevation values for all of them in the Profile View properties. Any way to select them all and edit the Profile View Properties? Maybe creating a group or something?
Civil 3D 2012 Win 7 Ultimate x64 Intel Core 2 3.2Ghz - 12MB RAM Nvidia 8500GT Dual DVI
Is there a way to label multiple structures/pipes at one time in profile view? We have tried selecting all at one time, right click and add label, but it only labels one of the structures/pipes.
I have an existing pipe network and a proposed pipe network. When I label a structure in my profile view, how do I combine the different network information? (Or do you usually have one network for both proposed and existing?)
For example, I have an existing pipe that will remain, but I will replace the structure and connect it to new pipes. On my label, I want to label proposed structure, pipes, and existing pipe using italics.
I have one LW polyline consisting lines and one or two arcs. I want to calculate length of all line segments and arc segments separately and the resulted values to be shown as attributes (seperate attributes for line segments and arc segments).
I have 2 different surfaces (Existing Ground & Proposed Pipe Invert) that I want to have the elevations shown for in a profile data band, but I want them to show at the design profile's PVIs (Proposed Road). Is it possible to set up a data band style that samples at one profile's geometry points but displays the elevations from these points from a different profile? My workaround is to set the data bands to all sample from the design profile first and label over the design profile's data band but I'm hoping for a cleaner solution. Attached is an image showing the profile view in question.
I can't figure out the proper commands to fill out and complete the script below. What I am trying to do is:
- Create a new document using one of the Profile presets (or have the New Document dialogue open so I could select the profile, size and bleed) - Make 3 layers, each with a diferent name - Create a rectangle the size of the artboard on the bottom layer, with a swatch stroke and no fill - Create a rectangle the size of the bleed on the middle layer, with no stroke or fill
Like I said, I haven't gotten far at all. I've read through the basic scripting guides and I'm just not understanding all of the language needed to string things together.
tell application "Adobe Illustrator" make new document set topLayer to make new layer ¬ at beginning of document 1 with properties {name:"Vector"} set bottomLayer to make new layer ¬ at end of document 1 with properties {name:"Through Cut"} end tell
is there a way to draw a line in the profile view and create that line into a feature line? and if there is can i project that line into the plan? i know that you can make a feature line in the plan and project that feature line into a profile view, just wondering if you could basicly do the reverse. i don't want to make a coridor.
I want to create a profile layout by feature line. Is it possible?I have a pipe about 3 miles long, an alignment along the pipe, and a provie view showing the exisitng surface and pipe network. The pipe network was created from a feature line. I projected the feature line to the profile.
This is why I want to do this: I need to label the horizontal and vertical angle points of the pipe in plan view. I crated a style that shows the station and elevation. I want the elevation to reference the profile. But it only gives me the elevation of the surface and I need the top of pipe elevation.
I tried crate profile by layout and traced over the top of the pipe in profile but its 3 miles and it will take a long time. How to get what I want done faster?
When I try to create a feature line using an alignment/ profile, sometimes it gives me a feature line for the entire alignment, even though my profile is only a small segment. I made sure I selected the correct profile, and I even deleted all other surface profiles just in case. But it still gives me a wonky feature line for the entire alignment.
However, in the same file, other profiles have worked perfectly.
We are using Civil 3d 2012 with Topcon Data Collectors. Topcon will not read a profile created by using "create surface profile" command but it will read a profile using "Profile Creation Tools" command. We are not sure if this a civil 3D, Topcon or a LandXML issue?
I have in front of me a survey of a small section of road (it's only 10m x10m or something). I want to be able to create a profile along the road section to demonstrate the surface level changes. I have created a network surface but Civ3D doesn't seem to able to use this type of surface to create a profile. Is there anything I can do, perhaps a way of transforming the network surface into another type of surface? Or am I going to have to manually create this profile in ACAD!
I am trying to create an assembly with a U channel (side ditch) that's top will follow the sidewalk it is next to but I need the profile of the U channel to be different than that of the roadway. Is there a way to create a custom subassembly part that will do this? Can I create a different allignment/profile for the bottom of the U channel that can then link to the other assembly?
The only other think I can think of is to use a dynamic block to add the U channel to my cross sections, but that will take a lot of time to do.
When I am asked for the Profile Origin the cursor is like a standard Windows Arrow pointer and won't let me select a point for the origin.If I use a polyline for the quick profile all works as expected...
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design) Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD 16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I needed to join lines into a curve, and not being used to all the extra features of Corel over my old application.
I read of what seems to be a feature of closing different line segments, and it seems that Corel can join two different lines at their start and end point, and take on the characteristics of the first line selected and the help file displayed a pictures of what can be done. BUT I CAN'T DO THAT!
I am trying to do what is shown in the help file's "closing multiple line segments" right most image. Where two lines are closed with another and the new middle line is sort of shaped "in between" the two lines.
I included a file with a bitmap of the examples, and lines I traced for it, and what is happening when I try to join the curves with a bezier, both selecting both lines, and selecting start and end nodes.
Having a rough time with Pipe Networks! I am working an example from the Mastering C3D book (P. 371) as in the following steps:
1.Clicked SS structure(16)
2.Selected Create Alignment from Network on ribbon
3.Selected last structure(18), hit Enter
4.Changed options as needed in Create Align from Network - Create Profile and Profile View check box: Selected
5.Changed options and clicked Create Profile View
At this point the program pauses, then a dialog box trys to partially fill the screen but is all white then fades away as fast as it appeared and I'm stuck with a paperweight that beeps at me everytime I click the mouse, no panning or zooming response at this time. The command line is prompting me for the profile origin. I can switch to other apps and bring up TM and when I attempt to end C3D then it tells me that it can't because waiting for response. I can then cancel the prompt to save the drawing and C3D exits the active command and control is returned.
[URL]
Civil 3D 2013 SP 1, 64 bit Dell Precision T5600, 16 GB Win 7 Professional 64 bit Intel Xeon @ 2.0 GHz NVIDIA Quadro 4000
