, I have CS5, and a Sigma 15 - 50 lens.
If I want to apply lens correction in ACR thgere is a dropdown list of lenses, but my lens isn't included. presumably because it has been superceded by the 12 - 24.
So, is it possible to create a custom profile for this lens and save it for future use? if so how do I do this?
I have created default settings by serial number for my Canon Mark III 1ds which include enabled lens profile corrections. I then created a user preset with these default corrections. Next I imported a folder of RAW images shot with this same Canon camera with the user profile checked as part of the import. When I switch to the Develop module and check the Lens Corrections panel, I see that although it is checked for each file, the actual make, model and profile are not populated.
Is this a bug or am I overlooking something on import? I understand that in LR 4, you can apply specific lens and camera calibration profiles to camera serial numbers (noise reduction etc too).
MacPro 2.8 Ghz Quad-Core Intel Xeon with 16 gigs of ram running OSX 10.7.2.
I am currently working on making a lens profile and the instructions are pretty annoying as they require the calibration chart to remain in the same spot while you tilt the camera as well as move the camera around to make sure that you are tilting the camera to bring the calibration chart close to a side of the frame but not clipping it and also staying within an angle of 10-30 degrees.
This seems overcomplicated, instead, why cant adobe make a single calibration grid where the camera is positioned in such a way that it fills the entire frame as much as possible without clipping, then it simply corrects using the single chart.
With the way it is now, unless you have the camera on a computer controlled dolly and computer controlled head, you will not be able to make a completely accurate lens profile.
Using LR 3.5.1. When applying Lens Corrections/Profile/Enable in Default, my Sigma 10-20mm f/4-5.6 actual lens is being corrected by the profile for a Sigma 10-20mm f/3.5 lens. I can tell it's the wrong correction because the barrel distortion after using the default profile is not corrected, and when I manually select the 4-5.6 lens the correction is perfect. So I know the right data is embedded in the LR correction data bank but is not being used.
I found that when I set the profile Setup selector to "Auto" the correct lens is selected and the correction it makes is "correct." But then moving to the next photo it switches to Default again, selecting the wrong lens, and so has to be set to Auto for each photo. This action doesn't seem to me to me an expected result called "Setup." I need this for my home interior photography, and with hundreds of photos a week I don't want to manually operate this. This didn't happen until v.3.4 or 3.5, I think.
So, how do I get it to select the right lens as the Default, or get the Auto setting to stick? Either would do. (Seems to me they logically are the same thing).
In addition, why isn't it possible to have the profile itself enabled as a default perhaps in a preset - or is that possible and I don't know how to do it? In other words, once it's working right, why not make it an import preset for that lens?
I'm trying out the new Sigma 24-105 DG lens with my 5D M II. The lens profile is not yet in the list of Sigma lenses. I checked and my LR is up to date with the latest version 5.3. Is there a way to find the lens profile to import for LR lens correction function? Or do I just need to wait until LR updates for new lenses?
View 5 Replies View RelatedHow or where can I get the lens correction profile for the Canon 18-135 STM lens in Lightroom 5 ? In effect he is not available in my list of correction lens so my lightroom is up to date apparently.
View 2 Replies View RelatedIs there a lens profile for Nikon 18-300mm lens?
View 1 Replies View RelatedHow or where can I get the lens correction profile for the new Canon STM lenses?
View 5 Replies View RelatedI am using lightroom 5 at work and shot some images with a canon 5d2 body with tamron 24-70 2.8 vc and tamron 70-200 2.8 vc lense. According to the note below, both lens are supported since lightroom 4.1. However I can not find the profile of these two lens on lightroom 5. How I can bring the profile back in?
View 12 Replies View RelatedI just bought the Tamron SP 90 2.8 DI MACRO USD and LR lens profiles only lists this lens for Canon (F004E) and Nikon (F004N). There is no profile for Sony (F004S) ! Any drawback if I use F004E or N ? Or better use a the profile of the older Model of that lens where there is a Sony profile ?
View 7 Replies View RelatedIn my previous post of the same subject, I managed to create a door style using a custom made profile for the jamb .However I have been having a lot of problems trying to make the door leaf sit properly between the jambs. Attached is what I'm trying to achieve - is that possible in ACA? (BTW this was done in Revit)..
View 5 Replies View RelatedHow do you add a custom working space profile to the profile list in CS6.
View 1 Replies View RelatedI am having problems with the lens profile. i am working with raw images and when i open in Photoshop cs6 (on Mac) and click on lens correction
cant detect what lens i m using (is the canon 16-35 mm) it just gives me option from other canon lens but not this one. when i click search online - doesn't work as well.
i even downloaded the Adobe lens profile down loader and find the profile for the lens and downloaded it but still doesn't appear in Photoshop lens correction.
when i open the image in lens correction in the info box under the image gives all the correct info what camera and lenses are used !! but why there isn't any lenses available to select when tried to edit the image?
How to Add a lens profile from Adobe lens profile down loader or how to add in another way canon lenses.
I am using Photoshop CS6 on a PC running Win7. In the previous version I was able to save a profile in the Lens Correction panel. In this version I can find my camera and my lens but it won't let me save the profile. I only real estate and straight verticals are very important.
View 3 Replies View RelatedI have made 4 attempts to download this program for Windows 7 and CS5 (64 bit). I have successfully downloaded Adobe Air as required. However, when I try to open Lens Profile Dowloader.swf I get an error message. It won't let me copy and past the message so here it is in my own words. "Adobe Reader cannot open LensProfileDownloader.swf because the file has been damaged."
Is there a problem at Adobe's end with this program? Without this program I have no access to lens profiles created by individuals and shared with Adobe.
I'm just beginning to work with Photoshop CS5. When I was editing with the camera raw features; I discovered that there had not been a "Lens Profile Correction" loaded for my Panasonic Lumix DMC-L10 with a Leica lens 14-150. I"m looking for a method to get this lens added to the Profile Connection.
View 1 Replies View RelatedUnder Lens Corrections in ACR I get the following error message : "Unable to locate a matching lens profile automatically." How do I install the known profiles as I believe the lenses I use are well known and are in the adobe list of common profiles?
View 6 Replies View RelatedIs there a way to save a custom artboard setup with a custom document profile in illustrator cs5? I do technical illustrations and our page size is odd (7.19 x 8.96. It the size that our Framemaker layout is set to.). I have a custom document profile that I use, but I use the grids all the time so that my callouts are spaced out evenly around the art. I would like to have a way to set the artboard up so that the grid will align to the center of the artboard everytime I turn them on. Right now they always start from the top left and when I center art in the center of the page, the grid spacing isn't the same on each side of the art. I just want to be able to open my document profile, turn on my grids, have them start from the center, and I can get down to business. As it is now I have to go into my artboard settings and manually adjust the grid to the center. Small annoyance, but it still annoys me. I have tried to save it a few different ways, but nothing has worked. Maybe there just isn't a way.
View 4 Replies View RelatedCan you add a lens profile to the adaptive wide angle filter in Photoshop CS6?
View 3 Replies View RelatedI'm using Lightroom 4.4 on a five-year-old iMac. I haven't been able to upgrade to LR 5 because it requires an operating system upgrade, but the technicians at the Apple Store say my machine is too old for the upgrade. I just bought a new Sony 18-105 lens which requires siginificant software lens correction. It has been included in the latest ACR in LR 5, but not LR 4. Is there any way I can locate and load the lens profile for just this one lens in my LR4? I've looked and there is no profile in the Adobe Porfile Downloader I can use.
View 14 Replies View RelatedI'm unable to find a profile for my Canon 5D Mark III within the PS CS6 lens correction filter. In fact, Canon isn't even available as a camera make option within the Search Criteria box, nor are any canon lenses. When I click the Search Online button, the prompt reads "No online profiles found".
I have no problem within Light room 4 (the Mark III and lenses are recognized)-- however, I'd really like to be able to use the new Adaptive Wide Angle Lens filter within CS6, which needs the camera's EXIF data to function correctly. I'm using a new i Mac OS X.7
Does LCP work with PSE 11 Camera Raw. If so, how is it used. How is "Embedded" changed to the specific camera/lens profile
View 2 Replies View RelatedI use Lightroom 3.6. The "lens profile corrections" does not have my lens in the drop-down menu. Is there a way other than using the Adobe Lens Profile Creator Tool to create this profile? The lens is the Nikon AF-S DX NIkkor 18-105mm F3.5-5.6 G ED VR, and I use the Nikon D90 dslr. I only shoot JPEGs.
View 1 Replies View RelatedAt work, on a Windows 7 laptop, I used the Adobe Lens Profile Creator utility to make an LCP file for a Nikon 1 6.7-13mm zoom lens. After submitting that LCP file to adobe via email, I copied it to my Dropbox. At home, on my Mac OS X 10.8.5, I copied the LCP file from the Dropbox to:
LibraryApplication SupportAdobeCamera RawLens Profiles1.0
Then I launched LR 5.3, navigated to a raw (NEF) image shot with this lens, and attempted to apply the lens correction in the Develop pane. Although the Library correctly shows the meta data for the lens and camera, the Lens Correction section in Develop does not even list that lenses LCP file in the drop down menu. Instead, LR attempts to apply a different lens profile which does not match the focal length of the zoom. I'm wondering if the LCP file that I created will only work on a Windows PC since that is where it was created?
I have Lightroom 5. I can see lens profiles for JPG files but they don't appear for DNG files.
View 3 Replies View RelatedHow and where to get profile for lens Panasonic 3/4 for LR4
View 2 Replies View Relatedi used Adobe Lens Profile Downloader 1.0 (Vista) to install a Profile for my Sony DSC-R1. I can see it in ...Adobe/CameraRaw/LensProfiles/1.0/Downloaded/ as 9480906a6e914dc7a47b3d5cf491d624.lcp. But it doesn't show in Lightroom 4.1 as a profile under Camera Calibration.
View 2 Replies View RelatedI've been waiting for an update that includes a lens profile for the AF_S Nikkor 18-35mm 1:3.5-4.5 G W/A lens. I thought it would be in RC 5.2 or Camera RAW 8.2 RC. But, no. Closest I can now come is the more expensive 16-35mm W/A. I'm using this on the D600.
View 11 Replies View RelatedAs my camera is fairly "old", lightroom does not have a lens correction profile for it. I have created a lens correction profile with Adobe Lens Profile Creator. Now how can I import this profile in Lightroom?
View 11 Replies View RelatedI need the lens profile for nikon 28 - 70 where to down load ?
View 1 Replies View RelatedI have downloaded subject and companion programme AIR. Selected my 24-70 ZA lens and downloader says installed. Yet when I load up LR (3.5) the new lens does not show in the Sony le s profiles just the same old 4 lens that LR comes with.
View 2 Replies View Related