I notice in some of my postings and profile the occasional word has a hyperlink to advertising applied. It's not me doing this. Is it something the Forum software is doing?
View 3 Replies
I'm using Lightroom 4.1 and Photoshop CS5 Extended on Mac OS 10.6.8.
Recently images opened in Photoshop from Lightroom are not recognizing the distortion correction when "enable profile corrections" is ticked for any lens.
I've tried reinstalling Lightroom; no difference. However, chromatic abberation corrected in Lightroom is recognized in Photoshop.
the vertical grid is not showing up even though is turned on in view style! tried different things but nothing seems to work, and the horizontal grid doesn't clip to the profile even though i select the option! it goes way up until profile frame!
Windows 7, intel I7, 8 MB RAM, civil3d 2013.
I'm creating finished roadway profiles by setting the PVIs then going back and inserting vertical curves (Free Vertical Parabola, PVI Based). When I insert the vertical curve, it displays as 1-5 tangents depending on length (not a smooth parabola). I've changed the curve tessellation distance under the Edit Profile Style - Design tab, but it doesn't smooth it out. What am I missing here. I don't have this problem in other drawings and I'm using the same template/drawing settings.
View 2 Replies View RelatedNew Pro 4X user here (only started using 6 days ago!). Love the software.
I have two questions. I checked the knowledge-base, youtube and searched this forum for answers.
Q1. Is it possible to embed clickable links in a video?
Q2. Is it possible to change the background colour of the pre-set Titles (the black background)? If so, how?
I want to create a DVD with 3 or 4 simple links to chapters and extras that can be accessed with a remote from the DVD menu. I am sure it must be possible.
View 2 Replies View RelatedI have a trial version of Video Studio X5 and I am trying to decide if I want to buy it. I am very interested in making DVDs from family video clips.
I guess I am a bit confused about making menus w/ chapter links. I successfully used the "Edit" tab to make a nice movie w/ transitions and chapters. The "Add/Remove Chapter Point" button seems to work just fine, w/ little green triangles on my timeline. However, when I go to make a DVD via the "Share" tab, it seems like the clips are still present on the bottom of the screen, but the program has forgotten all my chapter markings. I see that I can "Add/Edit Chapter" if I want (under "Edit media:") but I just want to use the chapter settings I created when I was on the Edit tab. I found a bunch of tutorial videos and they all seem to involve adding chapters at this point (under "Share" but not under "Edit").
Related question, I am pretty sure I should be able to do the following but not positive Can I create a simple menu that has a user-specified number of chapter links on it? I just want a simple background photo w/ still-thumbnails as links to my chapters.
I'm reconstructing an old document originally developed with PageMaker. I've recreated a half dozen pages hopefully with more uniform techniques. The original line art for the pages was created in AutoCad and some were scans. To bring them into InDesign some of the art is now in psd format and some of the newer art is in Illustrator AI format.
I've noticed that the pages with photoshop art print pretty quickly (about 30 seconds). The ones with Illustrator art take much longer (about 1:30 seconds). They go through a flattening process.
I print these 50 page books on demand and that additional time would add about an hour.
I guess the question is whether this is normal and to be expected or not. If it is I'll likely turn everything into raster before going into InDesign. That, however, seems like quite a bit of extra work. Going from AutoCad to Illustrator (to add stroke) then to PhotoShop to change to raster and then into InDesign seems like a pretty convoluted work flow.
On capturing GoPro footage VS6 (library and time line) the file name appears in Edit but not the video. Have used VS4 up till now and have just installed VS6.
View 4 Replies View RelatedI upgraded my computer to Windows 8 from Windows XP with a clean install. I've installed VS X5 & SP1 on it. I now find I can't create a custom profile either by copying an existing one or building a new one from scratch. I think Windows 8 is protecting something but not sure.
Make Movie Template Manager
New
select Windows Media Video for file type and enter a name
Select Profile tab
Click Customize button on bottom
Now in Manage Profiles
select a profile then click copy
error message "The profile could not be saved. Restart the encoder and try again"
Try to create new profile upon saving error "Access is denied 0x80070005" then click ok then "An error has occured. If the error continues, consider reloading the session file, starting a new session, or restarting the encoder."Maybe this also happens on Windows 7 but I don't have that. This works fine on Windows XP.
I have used X4 for about two years and X6 for the past couple of months. I cannot figure out how the create more rendering options under Share -> Create Video File. For example, if I want to use the MPEG codec but a custom resolution. Often custom is greyed out and not selectable. In free software such as ffmpeg or Virtual Dub I can create video as any resolution, aspect ratio, or codec. VS options seem to be very limited to these prepackaged choices. For example, some people have described moving a .DLL to the Coral folder to get custom codecs under the Create Video -> custom option. I'd rather not have to always render in VS and then recodec in another software.
My biggest challenge is the new Instagram format. It is basically 640x640 webm format. But I can import MPEG h264 without issue. My goal is to setup a 1:1 640x640 profile so I don't always have to game and stretch titles to display properly in the final version.
I have an alignment label that I normally use to show the PVI's of a profile in the plan view.
This is a little unusual, but in a specific case I wanted to design my profile at one alignment, but show it at another. I designed my swale profile in the pathway profile view and then superimposed the swale profile on the swale profile view. I then went back to the swale alignment to add these labels.
It's a no-go AFAICT. The only profile available for me to select for these labels is the original ground profile from the surface.
I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?
View 9 Replies View RelatedIm creating a Profile Bandset and would like to have multiple surface/profile elevations shown, ie: EG, FG, Back of Curb and Back of walk. While creating this bandset I see that the text component editor properties only has code for profile 1 elevation and profile 2 elevation in the properties area, which the code for this looks like below.
<[Profile1 Elevation(Uft|P2|RN|Sn|OF|AP)]>
<[Profile2 Elevation(Uft|P3|RN|AP|Sn|OF)]>
Ive tried to write my own code using the profile 2 as an example but it doesnt seem to work as a 3rd surface/profile and only seems to mimic the profile 2 elevation when placed in the band
My questions are as follows
1) does Civil 3d only allow 2 surface elevations in any band set? if it does allow more profiles/surface elevations what am i missing to create it?
2) if Civil 3d does alow for multiple surfaces to be shown in the band set how do i get the text component editor to supply the extra profile elevation codes? or would i need to create from scratch
3) if i need to write the code from scratch does any listing of the codes and meanings of each code ie what does RN, Uft, Sn and so forth do and mean .
I want to create a profile/wall style or what ever you want to call it for a raised deck flooring for external decking. I am looking at the decking material only. Not concerned about the timber framing sub floor material.
View 1 Replies View RelatedI've been trying to reproduce this color blind conditionfor a long time now and I still didn't figure out how I can do this. I've searched for cluts but didn't find any, only this, which has some previews of them, but no any files I can load into Photoshop's Color Lookup adjustment. I've looked into Pixel Bender plugin, but I'm using CC so that doesn't work either... I've also tried it with the Index Color mode, but that really messes up my image as it has a really low color range (256). I've even tried reproducing the same effect with adjustments, channels, etc, but didn't figure it out.
Since there's a way to perfectly color proof images with this condition, I'm guessing this has to be some kind of ICC profile or something similar. Is there a way I can use it as a color profile?
I have a group of profiles in a drawing and I want to change how one of the profiles is displayed through the profile view style manager, but I do not want to change how all of the profiles look. Is there a way to change the way a single profile looks without changing all of them?
View 2 Replies View RelatedI have a profile showing proposed storm sewer, existing sanitary, rock surface, existing surface, and proposed profile. Today for some reason the proposed profile and labels, and the existing surface are not showing on the profile and I'm not sure what has changed or how to get them back.
View 3 Replies View RelatedI am working C3D 2012. I have a proposed alignment and profile design by another firm that I had to tranfer into C3D. I had no problem getting the horizontal alignment to display from a text file. I tried to do the same with the profile by using the 'create a text file and create the profile from file' command. I got the POB, PI's, and POE to display. I then defined the VC. I wanted to verifiy that the profile was indeed accurate compared to what we were provided. So I tried to execute a profile report PVI Station and Curve Report - I keep getting an error that "No FG profiles in dwg".
I know the Proposed profile is indeed set to proposed in the properties. I have noticed that the icon next to the profile I create from the text file is different than the profiles created from scratch.
Is there a way to convert this profile to be recognized as a FG profile?
Intel Core i5-2500K CPU @ 3.30 GHz
8.00 GB
64-bit
I try to make curb return profile without profile view like a intersect command.
I was make curb return alignment but I can not find profile command without profile view.
In Development module in LR4.4, viewing a Fuji X100s raw file (converted on import to DNG) I tick the box for "Enable Profile Corrections" under "Lens Corrections," and select "Auto" from the "Setup" menu. I would have thought that LR would pick up the X100s profile, but no, nothing happens. If I choose "Fujifilm" from the "Make" dropdown, I can find the X100 (not X100s) profile manually. The profile's probably pretty similar, but still, I'm wondering why my install of 4.4 doesn't have the X100s profile in place?
While I'm at it, I'll ask this too -- I recently bought the new Nikkor 35mm 1.8G ED (the new full frame 35mm Nikon lens, not the trusty 35mm 1.8DX) and there's no profile for that lens in my LR4.4 either.
Finally, I note that when I choose "Check for Updates" from the "Help" menu in LR, I'm told there are no updates available.
The intersection wizard makes dynamic EOP profiles based off of the cross slope from the centerline. Well the intersection tool doesn't always work with funky intersection layouts. Is it possible to manually create a dynamic EOP profile based on the cross slope from the centerline profile?
Civil 3D 2012
Windows 7, 64 bit
How do you add a custom working space profile to the profile list in CS6.
View 1 Replies View RelatedI have a 10 foot profile view and a 15 foot manhole. I want to show the manhole but not the bottom 5 feet. It is extending beyond my profile view.
Civil 3D 2014 SP1
Windows 7 Professional
Intel Core Quad Q9650 3.0 GHz
8 GB, 64-bit
I have yet to produce a profile. I created a polyline and turned it into an alignment.
Looking at alignment Sample(3), I see that it is not superimposed over your surface. The polylines are, but the alignment is not. That will disallow creation of a surface profile.
Is the sample5 an alignment that sits on the surface? how come there is still no profile?
differences in elevations of points along Profile 2 (the proposed new road elevation) and Profile 1 (the existing elevation/surface) should be computed and shown right above the Profile 2 line. For example, if at a certain point PT 1 the elevation of the proposed road is 132.44 meters and the elevation of the existing surface is 132.45 meters, the difference is -0.01 meters and it should be shown exactly above the Profile 2 line (or a little bit above it) but not on it. The same should be done for every chosen point along the proposed profile.
So far, I have done this manually, by dragging the difference (already automatically computed and shown in one of the bands below the profiles) to the correct place for every single point. However, I don't know how to do this automatically.
I want to transfer or copy the tool palettes (walls, doors, FFE) from one profile to another. I have all my tool bars, set in one profile correctly, but all the tool palettes are in another profile.
Is there a way to copy these tools into another profile? Even if I over-right another palette?
The attached profile is a section from a solid. I would like to create a closed profile in order to extrude the shape into a solid. The polyline command and splinedit don't seem to do the trick.
View 9 Replies View RelatedWe have an engineer who is taking an existing surface and wants to show a proposed road 2" higher than existing.
I told him to simply adjust his assembly for his corridor to account for the 2" difference, but the County agency needs to see a profile.
My questions:
1) Is there a way to easily copy a profile made from a surface and "convert" it to a proposed profile? If we copy and explode, it turns into hundreds (thousands?) of tiny pline segments and it would be a mess to convert all those to a profile 1 by 1. If we make the corridor, and choose "profile from corridor", we do not have an option that could be used to represent the centerline.
2) Other than loss of dynamic updating), would it make sense to adjust the assembly so the top surface would be accurate, then copy the profile, explode the copy to a block and simply shift that (as essentially basic linework)?
where to change the text height and color for the lower band where the stations are. Also, how do I get the exist grade and proposed grade to show at the specified stations vertically like LDD used to do it.
Second, how do i mask the pipe in the manholes on the profile. Right now i can see the pipe inside the manhole. I clicked "enable masking" under the structure properties but no luck.
Attached are survey points that created the surface of a road embankment portion that caved-in. The road is very near a reservoir shoreline.
1. How can a surface profile be produce? I/'ve use line to change it into an alignement and then create a proile , then a profile view. But the the surface profile is missing.
2.the points having higher elevation are the top edge( road level) of the cave-n . A few few shots were take before the shorline elevations.
3. What the best way to come up with the rock volume to fill the cave-in given this surveying points., Also the shoreline elevation will be lowered some more while work is being done since the fill is not allowed to fall in the reservoir.
