Revit :: Split A Toposurface To Subregions?
Jun 19, 2013
I m trying to split a toposurface to subregions. I have a dwg attached and it contains several closed polylines. when i am in subregion menu i use the pick line tool pressing the tab to pick all the loop. I can pick some loops but not all. I cant see any difference between the closed polylines. why i cant pick all the loops? Is there another way to pick a lot of segments at one. Manually is very difficult . All the polys have a lot of segments
View 2 Replies
ADVERTISEMENT
Feb 23, 2014
How do I edit the points in the toposurface programatically? Like the elevations all increase 2 times the original one.
View 3 Replies
View Related
Aug 20, 2013
I need to model a building that cascades down a steep sloped hill. Should I create a toposurface first and then model onto that or should I make my model and then apply it to a toposurface?
View 1 Replies
View Related
Jan 28, 2014
I'm having trouble getting the visibility of walls within toposurfaces to display correctly. Please see the two attached images, showing a wall extending into a sloped grade. I have a plan view which in some areas shows the wall above grade, and in other areas shows the wall below grade. The red line through image 2 shows the approximate cut line of the plan view shown on image 1. The problem is that the toposurface pattern extends through the interior of the solid wall, in areas where the wall is buried below grade. The plan view display is set to Hidden Line, not Wireframe, and the wall is not set to display as transparent. I want the wall's geometry to cut out the toposurface - you'd see the concrete hatch on the wall, but not the fill pattern of the topography.
View 1 Replies
View Related
Dec 5, 2013
I have an Excell spreadsheet with X,Y, and Z coordinates.
I wish to import it into Revit and create a Topo surface from the spreadsheet. Is this possible and if so how do i go about it.
View 3 Replies
View Related
Mar 20, 2013
How do you control the bottom depth of a toposurface? I have a structure with a basement and the "Earth" stops at the top of the footings so that my details show the footings floating in space!!
View 2 Replies
View Related
Sep 12, 2012
We have drawing lists that exceed the area available on the sheet and want to split it between 2 sheets. I have accomplished this with a parameter that can be filtered per view but was wondering if there were any other methods you may have used?.
View 1 Replies
View Related
Feb 13, 2012
In Revit sections, we can add split segment in plan.
How can we show the Horizontal sections in sectional view and how can we split the horizontal section such that the drop is vertical.
I know that one workaround to show vertical drop is to use plan region on the Horizontal Plan View. But is there a better way? If not is autodesk looking forward to incorporate this in further releases?
View 1 Replies
View Related
Oct 12, 2013
I tried the tool Splite Face use a curved wall,But only on straight surface is activated.
View 2 Replies
View Related
Oct 27, 2009
Is there a way to hide the lines between areas created via the split face tool? If not, my end goal is to have an area on a surface appear a different color than the surrounding area, with no lines between. The surface is the face of an extrusion in an in-place family.
Revit 2009
View 3 Replies
View Related
Sep 20, 2012
the situtation is splitting a floor face in the exiting phase to "paint" the floor tile pattern in the existing restrooms and then removing that once in the new phase and resplitting to "paint" the new pattern...
is it possible to split a floor face in existing phase, paint it, then move to new face and un-split and paint it to create a new split and new paint?
View 1 Replies
View Related
Sep 12, 2011
Certain exterior walls ghost out / disappear in plan when hosting a split face. This doesn't happen on all walls, and it suddenly appears on walls that were performing fine.
View 5 Replies
View Related
Jun 17, 2011
I have 1 question. How to split the segment on interior elevation view?
View 3 Replies
View Related
Sep 2, 2013
I made all my polygons with the same technique but somehow interactive polygon split tool does not split all polygons... I attached a file with which I have problem. Split tool just "disappears" after submitting changes...
View 1 Replies
View Related
Mar 28, 2011
Sometimes when UV unwrapping, the map, for some reason ends up as individual tiles, even though the mesh is a single object. How can I fix that? Every single polygon has thick, green lines - like seams. When generating normal maps, it simply comes back as 'squares' of nothing, but laid out accordingly to the UV layout, so it's useless and holds no detail what-so-ever.
There are no inverted faces or overlapping faces, so that is not it. I can't weld every single vertex - there are thousands of them, of course, so it's rather baffling. The vertices, though, are connected, so that too is not the problem.
View 3 Replies
View Related
May 28, 2013
I have been using VS for quite some time, along with my Panasonic GS500. When capturing my video, VS would create a file for every start /stop of the video. I shoot high school football. This is extremely convenient for cataloging plays, because each play is its own file. I know that "Split by Scene" is available, but it does not create a file for each play.I recently purchased a Canon XH-A1s and wanted to move to HD. will the new Canon camera and VS Pro X4 provide for the same type of capture, when optioned for HD.
View 4 Replies
View Related
Oct 14, 2012
I am using VS Pro X4 on a Windows XP Pro PC. When I 'capture' video from by vidcam (DV tapes) using 'split by scene' all the resulting clips all contain the first frame of the following clip.
I had this problem a year ago using my laptop on a VIsta Business platform and though that perhaps the 'problem' had something to do with Vista (well Vista isn't everyone's ideal platform) but now I am experiencing it on an XP PC so I am thinking that it is caused by VS Pro X4.
Is there a fix for this and/or a setting to stop this annoying problem. I am thinking that if No then I should reinstall VS 9, which I never had this problem with, just to allow me to capture video by scene correctly.
View 6 Replies
View Related
Nov 4, 2010
Using VS Pro X3. Is there a way to split by time (vs. by scene/content)?
View 7 Replies
View Related
Aug 4, 2013
I've been doing a project using two different cameras, I've done some of it and saved as a .mpg without a problem.Now for some reason I cannot use the split clip tool it is greyed out all the time no mater how I have the clip in the timeline be it set to clip or project.
I made one cut to align two clips now nothing..As I say I've completed three parts of the project without a problem using the split clip tool.
View 5 Replies
View Related
Nov 14, 2012
How to split polygon?I am using "bpoly" function when I split the polygon but It's inconvenient. Any better way to split polygons?I go over the functions through help desk.
View 5 Replies
View Related
Mar 25, 2012
I have a very large assembly drawing. The BOM is three times the height of my D size format. How do you split the BOM to break it into 2 or 3 columns instead of one large one that does not fit on the paper?
View 6 Replies
View Related
Mar 26, 2012
I have a vertex that is a connection point to several edges. Now, how do I split the vertex into several so every edge has one? Is there such a function? Or do I need to instert them manually?
View 1 Replies
View Related
Mar 13, 2012
I am working in 3ds Max Design 2012.
I have a short piece (4") of thin-walled pipe that is split longitudinally (sp?) - in other words, it is not a complete circle... and has a 1/4" gap that I can insert spreader pliers into... I want to 'open' the gap with spreader pliers (to release it) and thus, the pipe must 'act' accordingly.
I attempted using the Bend modifier, but did not have desired results. I might also add that I have not used Bend modifier beforehand.
View 4 Replies
View Related
May 16, 2012
I'm trying to achieve simple task, but can't do that. I have a guilloche background made of strokes. I need to cut them by a shape. The visual result i'm tring to achieve is the same as using the clipping mask. However i need to apply the mask to the strokes, and remove everything that is outside the shape. So is there a way of doing that?
Scirssors tool is not an option cos it'll take entire life to cut all the strokes manually. Outline opption in pathfinder is somewhat close, but then it's barely impossible to delete the cutting shape as it gets segmented as well.
View 8 Replies
View Related
Sep 2, 2011
I have over 40,000 images in one catalog, which is by date, within month, within year (back to 2005). Example: Today's images are set to import into folder 2011/Sep/02. I realize this is crazy and I'd like to split my existing catalog into one for each year. I recognize that to find an image from a year in the past, I might have to load and look into multiple catalogs, but I think the ability to back up a catalog at the end of a year and create a new one will make backing up WAY more effective than having, as it were, "all the apples in one barrel."
View 8 Replies
View Related
Feb 19, 2014
The is a script to split frames.But I want to do the opposite.I have a few frame and they are not linked.
View 2 Replies
View Related
Apr 27, 2013
need photoshop to split image to two parts and paste the second to the bottom of first in photoshop and need macro for this as i need to do for 1000 pages.
View 1 Replies
View Related
Oct 28, 2013
After spiting the audio form a DVD in X5, I want to make a CD of the audio (narration) .What is the best way to do ?
View 5 Replies
View Related
Dec 31, 2010
I have used my Video Studio Pro X3 to creat a few videos. When I now try to creat a video the split by scene buttion is greyed out. I dont think I have done anything with the settings on my Camera a Sony HDR CX7EK. I record in standard definition and the file created has an extension .mpg with 720x576, 25 frames per second. The only difference this time around is that I took the memory card from the camera and transfered it to the computer with a reader instead of using the sony transfer and charging docking station. Strange is that I can also not split by second when using old projects where I could split scnenes some 6 months ago.
I also did read in a few other posts the button is greyed out if you record in analog cameras, which is understandable, but to my dissmay it seems like splitting by scene does not work on HD recorded files, is that true as i have used the HD function in the camera and created AVCHD files with file extension .MTS and plan to creat a few movies later on?
View 2 Replies
View Related
Nov 27, 2012
I'm using Corel Video Studio Pro x4 to make a promotional video for an upcoming event, and I used the split audio function to, surprise, separate the audio. Here's the problem: It has no sound. When I play it as a clip, it works fine. But if I play the project as a whole or add any kind of filter to it, it is mute. I've tried saving the project and opening it in a media player, still nothing. My music track and video track play fine, but the split audio does not.
View 7 Replies
View Related
Nov 5, 2010
I have my editing all done for a 2 hour 12 minute video. It has been my experience that I can get about 1hr 7min. on a DVD. Normally when i'm done editing, I choose Share > Create Video File > DVD. This creates a DVD compatable mpeg-2 file for burning later. I know I want to create 2 seperate DVD's. How do I split the video? Is it possble to slpit in the editing phase? I'm using VS pro 12.
View 3 Replies
View Related
