Revit :: Error When Synchronizing / Inches To The Fourth Power - File Not Saved
Jan 29, 2013
when I am trying to synchronizing to central I get a message twice saying "inches to the fourth power." then another message saying "file not saved."so then I find myself having to exit revit and start over with a new local file.
I did notice that when one person had a view or sheet open that I needed to work on that is when the error came up the most. so when the three of us would complete a task we would have to synchronize right after that task e.g. if I had several lights to place on the RCP I would place one light and synchronize and then place another light and synchronize. If I tried to do too much or waited too long to synchronize the error would come up.
View 5 Replies
ADVERTISEMENT
Jun 28, 2011
My Architecture office is using Mac Pro's with OSX and Parallels to run Windows 7 and Revit 2011. We are having issues with getting everyone to be able to work synchronize to the Central File. If one workstation (workstation 1) intially creates the Central File, puts it on the server then creates a local from the Central File they have no issue when synchronizing to Central. However if another workstation (workstation 2) creates their own Local File it does not synchronize to central, it tries and an error of "File Failed to Save" pops up everytime.
The Central File location is the same on both workstations (ex. \psfFirmProjectsActive ProjectsProject# and nameConstruction DocumentsDrawingsCentral File Name}.
We have also turned off all antivirus and firewalls to elimnate that as an access issue.
how we may be able to get everyone working with Local Files, and Synchronizing to Central?
View 9 Replies
View Related
Oct 18, 2013
I'm trying to synchronize "Noise reduction" settings on a set of 952 photos (which are actually smart previews), using LR 5.2, and after I click apply I get the following error:
An internal error has occurred: <AgErrorID>10003</AgErrorID>
I have tried with only 3 photos selected and it worked fine. But it seems LR is not properly handling the large number of photos.
View 7 Replies
View Related
Apr 25, 2013
I have a problem with the PSD file, size 228 MB. When electricity turned off, my computer shut down then I turned on it and opened the PSD again but there was only one locked layer filled in black and no other layers. I can not see other layers that was saved before. and here is red line on the top. How can I return my works back?
View 2 Replies
View Related
Oct 17, 2012
I have cdx5 (fully patched) running on a windows 7 pro x64 machine (c++, directx, updates all current) that has an issue when saving a file to a mapped network drive. The file will save error free but when you try to open the file again at a later date it gives a c++ runtime error (this application has requested the runtime to terminate in an unexpected way).
If i save the file locally then move it to the network share it seems fine. It can be opened and edited with out issue.
CDx5 needs to save to the mapped drive as the server runs onsite and offsite backups. There is a large volume of files that are changed/created daily. Saving locally and then copied to the server manually is also not an option as the user cannot be relied upon to ensure the files are copied to the server.
View 8 Replies
View Related
Feb 7, 2013
I've been designing for 3 days. A very important design but power cut in the apartment. I tried to recover the file. I've failed.
Should I save a picture? I look on the picture and can draw. I using Adobe Photoshop CS5.
View 2 Replies
View Related
Sep 27, 2013
I have just installed CS5, and all components work except for Photoshop, which will not open. I am on a new Macbook Air running Mountain Lion 10.8.5 with 1.3 GHz Intel Core i5. The error message reads: "You can't open the application "Adobe Photoshop CS5.1" because PowerPC applications are no longer supported." I have already tried reinstalling and deleting the library file: com.apple.LaunchServices.plist and restarting. What can I do?
View 1 Replies
View Related
Sep 16, 2011
I am trying to create a Schedule that figures out Light Power density for each room. The first issue is getting Lights to register what room they are located in. The next issue is getting the room area parameter to show up in the available fields. It is funny b/c Volume shows up but not the room area. How hard could that have to been to add that to the available list since volume is there.
View 1 Replies
View Related
May 11, 2012
I have a file that looks like it is going to open nice and fast and then it gets stuck at 50% synchronizing references. It literally takes over 5 minutes for the file to come completely up and ready to work on.
In the file I have an existing ground surface data reference and two corridors (with alignments, profiles and profiles views) that are basic access roads roughly 1200' long each with a very basic assembly. I also have a pipe network data referenced that is just a bunch of pipes that represent existing utilities crossing the access road so I can show them in cross sections. The final thing I have in here are 50' cross sections for each of these access roads.
why does it take me 5+ minutes to get into this file?
View 4 Replies
View Related
Mar 12, 2013
When a raw file badge shows that the file has been changed, I use Metadata Save to File & for the large majority of my images, the badge goes away and Metadata Status Changed does not show the file. For some of my files, however, the Save to File command doesn't work properly. If I am only displaying files with changes, the file briefly disappears, then returns. Even if I go to Windows Explorer and delete the xmp file, then again Save metadata to file, it pops up again with the badge saying it needs to be saved. I'm using Lightroom 4.3 64 bit on Windows 7.
View 12 Replies
View Related
Jan 11, 2011
I'm trying to utilize Revit ability to link an IES file as a lighting source in a lighting family. I'm running Revit Architecturer 2009. The ies files i downloaded from the manufacturer website produce an image inconsistent with what i would expect a light source to provide, instead of the "white" light, i get a red/green/black/blue image. I can link any of the ies files that are provide with Revit, and they work fine. it's only this Manufacturer provide file that's causing the error.
View 4 Replies
View Related
Mar 3, 2014
When drawing using imperial units in Revit, it of course interprets values you input as feet until you press " to let it know you mean inches. As I am constantly going between Revit and AutoCAD, which does the opposite, I keep missing the " out of habit and wasting time repeating everything. My question is, is there a way to change the input from feet to inches so I can move more seamlessly between the two programs?
View 2 Replies
View Related
Jan 30, 2014
I can't figure out how to get my levels to show fractions of inches. I can add a dimension from level to level and see the fraction, but the level itself insists on rounding to nearest inch. View scale makes no difference.
View 2 Replies
View Related
Dec 7, 2012
I use photoshop CS5 on windows 7.
Been working on a file with a few layers, then the power goes out so my computer "crashes". When I reboot my computer, I am unable to open the file I was working on earlier and instead, get the message "Could not complete your request because it is not a valid Photoshop document." The file is still .psd and I don't have a preview for the file anymore:
Is there anyway to recover the file?
View 5 Replies
View Related
Dec 26, 2013
I'm having a lively discussion within my department over the use of Power-Clips within multi-page files.We are working with X3 on systems running Win 7. Some believe that files containing images that have been placed in containers become corrupt, leading to exceptionally slow file-open and PDF-publishing times (up to 5 minutes). Is this a culprit?
Do they always need to be Converted to Bitmap after clipping?
View 2 Replies
View Related
Mar 15, 2011
Now is the pattern problem in hands! I try to attach patterns to wall: Materials, Cut pattern, New, Drafting pattern, Custom, Import:
And path: C/Program files/Autodesk/Revit Architecture 2011/Data
And there: Revit.pat (or any other *.pat file that I have).
And there it comes: An error! Syntax error in line 2 or 12 or 10 ? What has happened? Before I was managed to attach patterns ok. To an other project I mean.
Where on earth is the problem? In the project? The whole program? In the pattern file?
View 1 Replies
View Related
Jun 6, 2012
When we use Point Cloud Feature Extraction for Autodesk® Revit® 2012 in our machine in a central file with the pcg file then there is a Run time error shown in revit. But if we work in a single file then the problem does not occur. How we ovecome this situation?
View 1 Replies
View Related
Aug 11, 2011
Often when I open a project I ahve been woking on alone I get the following message:
"This file is already open for editing by another user. You will be unable to save any changes before that user closes the file."
Since I am working on the project alone there are no other users who could have the file open. I don't know why I'm getting this message.
View 1 Replies
View Related
Mar 5, 2014
I placed I-Joist on the floor plan and used the wrong spacing. Can I select the already placed joist and change the spacing from 12 inch OC to 16 inches OC? I know I can select the ones I want to change, but I do not see in the properties window where I can change the spacing. Unless I am overlooking it.
View 9 Replies
View Related
Mar 20, 2013
Out of nowhere my AutoCAD commands such as line, offset, circle, etc will only work if i type in the amount in inches. I use feet / inches when i use these commands. It says specify second point... Not sure what this means. For example I want to offset a line 15'-8". It won't let me do that. If i offset a line at 146" it lets me do it.
View 5 Replies
View Related
Sep 7, 2011
I am a new user (using Autocad 2006). My problem is I have been given a drawing file that I need to modify but it was drawn in inches, I have always worked in mm's. Can I convert the original drawing to mm's??
View 9 Replies
View Related
Jul 31, 2013
I encountered a problem with my 2014 version.When I'm in the Model In Place and I draw a model. And Save the Environment Model In Place If I click on the message will be displayed (It was also shown in the lower version).Click on the Save Without Model In Place project is to save the environment .
View 2 Replies
View Related
Nov 5, 2012
I have a client who has a set of .ai files they need resized to meet various epub layout specs. Apple and Kindle both are different sizes so I need to know the best way to resize an .ai file 11.25 x 5.65 inches into a smaller dimension in pixels while retaining the layers.
View 9 Replies
View Related
Oct 16, 2013
My problem appears when I open a saved project. Only when I open one certain file. All run perfect when I open others saved files. The error is:
"The program has encountered an unspecified erros and has stopped functioning. Please contact Corel Technicial Support and send the dump file for analysis.
The name of this file is: C:/User/home/AppData/Local/Temp/vstudio_16.1...... DMP"
View 8 Replies
View Related
Jan 23, 2013
When I send a file to Ps from Lr, edit that file then save it, Lr puts that file at the end of the line instead of next to the file I was working on. When you have 600 photos in a down loud, it is a pain to scroll through the photo's to find your place again.
Is there a setting to force the saved file back in line next to the file that was edited in Ps?
View 3 Replies
View Related
Jun 22, 2004
i try to open a saved file in photoshop i get an error message saying "Write to registry failed Options not saved."
it shuts down whenever i hit the OK button.
View 2 Replies
View Related
May 13, 2010
Occasionally I get the following message when trying to add data shortcuts.
"The drawing has not been saved yet, please save the drawing before creating data shortcuts" Only I have saved, this still occurs after either a full or quick save.
Shutdown Civil and reopen still gives the same message..The problem seems to be when you are saving to any other version of Autocad than R2010. Save as R2010 and it works.Mike Evans
Civil3D 2013 / 2014 British UK
Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz (8 CPUs), ~4.0GHz With 32768MB RAM, AMD FirePro V4900, Dedicated Memory: 984 MB, Shared Memory: 814 MB
View 9 Replies
View Related
Dec 28, 2011
I am updating a customers website now and have added a couple of items to a page and I now receive a pop up error - OUT OF MEMORY.I have optimized the photos and saved/closed/restarted but still not removing the error -
View 9 Replies
View Related
Jan 8, 2013
I've been working on a certificate and i saved it without looking at the file type. For some reason it set the file type to (.5). What is that? Is there any way I can open it again in CS5? Is there a file converter I could use. I just need to basically open the file agian in CS5 so I can continue to edit the certificate. I have tried opening the file with CS5 and CS6 and I get this message:
"Could not complete your request because it is not the right kind of document."
View 8 Replies
View Related
Nov 19, 2012
I created a file in Photoshop and was saving it along the way as a layered PSD file. When I went to open it a few days later, it wouldn't open and said that it was an '8 file'. What happened, and how do I fix it? It had all the design layers I needed for another project.
View 3 Replies
View Related
Oct 17, 2012
I am using Lightroom 3 on a Windows 7 PC.
According to Windows Explorer (and other software) I have over 50,000 graphic files, yet Lightroom will only catalogue about 35,000. One folder for example shows up in Lightroom as having 35 files, Explorer says 394. I try Synchronise and it initially reports "Import new photos 357". Then it reports "Import in progress", then "no files found"!
I try Import and all the photos in that folder are shown greyed out with nothing to import.I tried building a new catalogue but that didn't work. It imported around 35,000 of them only. A second run imported a few more but there are still around 15,000 missing fro the LR catalogue
View 4 Replies
View Related
