I am updating a customers website now and have added a couple of items to a page and I now receive a pop up error - OUT OF MEMORY.I have optimized the photos and saved/closed/restarted but still not removing the error -
View 9 RepliesI'm working on a print document and do not understand the behavior of Designer Pro X9 concerning image optimizing. When I drag an image from explorer onto my document, I'm being prompted (as expected) to decide, whether I want to import the original size image or a resized version. Choosing the high resolution version gives me the full size bitmap to work with on my page.
But as soon as I drag the same image from the bitmap gallery onto my page, I get a downsized version of 1920 x 1280 pixels, which also immediately appears as a copy in the bitmap gallery. Why this happens and if and where I can prevent X9 from doing this?
I removed color info and reset to greyscale, yet I still get a pink hue when I save as a pdf.
View 4 Replies View RelatedWhen saving images for the web, I know that it is best to..
file>save for web>save it as a jpeg high 60, depending on what kind of image> and make sure the optimized button is checked...
I was told that there is not point in saving images just as...
file>save as> and then choosing 12 on the quality bar which is titled 'image options' under the JPEG OPTIONS pop up which appears when doing this.
1. What is the difference. Why does saving for web make the image size so much more smaller. I tried test and it doesn't seem the quality changes so what makes the image smaller in size when saving for web?
2. Is saving like this
file>save for web>save it as a jpeg high 60, depending on what kind of image> and make sure the optimized button is checked...
the same thing as saving like so
file>save as> and then CHOOSING 8 on the quality bar (this is also jpeg high) which is titled 'image options' AND CHOOSING BASELINE OPTIMIZED UNDER THE SECTION WHICH IS TITLED 'FORMAT OPTIONS'....
baseline optimized being the most important part.
I have a series of very basic closed paths, doodles which intersect on another. I'd like to remove part of the intersection so that it'll appear that there's a whole devided into doodles, with no double lines. I know it might be simple but I can try here until the end of time...
View 8 Replies View RelatedError called "Cursor is Closed" that I'm getting in my AutoCAD error log. This error seems to come up when I do a join between an SDF or SHP layer and a Tabular Data Table. If the SDF or SHP file is on it's own I can click the parcel that I'm getting error and it will allow to be selected, but only when I have a joined table is where I'm getting the error.
View 1 Replies View RelatedI'm working with the attached photo. As you can see (or rather, can't see) Jeanine's eyes are obscured by the glare on her glasses. I'm sadly finding little blips and blurbs such as this on all the outside shots because this event took place on an absolutely spectacular day (not that I'm complaining given the bizarre weather we've been having). It's just I could not see in the camera's display some of the problems. I even had a couple that are completely blurry though they looked fine on the display at the time.
What is the simplest way to quickly correct this? I have several similar shots of her but the glare is present in all of them. It's actually worse in a couple of them.
I have a graphic but it is on a white background. I need to put the graphic on a colored background and therefore have to "cut around" the actual graphic(s) to do so. I am using PGD 6.
View 8 Replies View RelatedIs there a tutorial for cutting out part of a photo and using it in another photo. I have seen one on youtube but it is not detailed enough. It dosen't fully explain how to add your cut out part of a photo to a new photo. That is, how do i put the cut out part of a photo on top of a new background?
View 1 Replies View RelatedI have attached 2 images. Without cutting out the chilli with a mask or saving the chilli image as a transparent background and importing again, is it possible to get rid of the white area around the chilli and blend into the rectangle?
View 7 Replies View RelatedBeen running X6 for a month now. Updated to 6.1.
Things have been fine until I updated to 6.2.
I will create artwork in Corel Draw, save it and then export some elements out to another format.
Then I try to close the drawing and exit.
CANNOT DO EITHER.
I get an error that says 'Some of the documents could not be closed because some tasks..background. See status bar for....'
What the heck is going on here? I cannot close the file. I cannot exit the program. The only way to get out of Corel Draw is to end the program through Task Manager.
This update is bad news. I don't know how to go back to 6.1.
I am using Xara Photo & Graphic Designer 2013, but I still battle to use the color select and erase tool.
how to use the tool or on any other quick methods to remove the background from a photo.
In this case I am trying to remove the white background. I need to place the wedding ring on a black background.
Question about Xara Extreme 5. When I click on an object, there are a bunch of square dots around the outsite. When I use the pencil tool to go from one dot to another dot, waiting for the ~ to appear, Xara "sometimes" removes the "little" piece I am trying to remove... but other times, removes 90% of the object, keeping the tiny piece of the image (I am trying to remove). Is there a trick or shortcut so that Xara ALWAYS removes the smaller section? I thought that it would be, if you are selecting a piece (i.e. 10% of the selected image), it would remove it... but nope, sometimes it keeps the 10% and removes the 90%. Very frustrating and obviously I do not understand the use of this tool.
View 9 Replies View RelatedI'm kinda new to Xara Photo and graphic Designer 6. I have photos of appliance spares. I need to use only the images of the spare parts for an advert(of which the background will be white) - I dont want the background of the photo.
View 7 Replies View RelatedI'm using Xara Xtreme Pro 5.1.2
I have a portrait photograph that is fine in most respects but there is a shiny patch (light reflection) on the forehead and on the nose.
Is there an effective way to remove or tone down the shine without interfering with the rest of the photograph?
I have a HUGE Xara file that is becoming very slow. And it turns out that the reason for this is that at some point, many edits ago, I accidentally must have pasted the same thing multiple times!
i.e. I currently have: text-shape-text-shape-text-shape-text-shape-text-shape-text-shape-text-shape-text-shape-text-shape-text-shape-text-shape etc all on the same layer.
The problem is that there are a large number (about 100) of items. Any good way or removing the (hidden) duplications of texts and shapes ?
effective way of removing a selected coloured area from an image (a jpeg in this instance) without affecting other parts of the image. I've added a sample to illustrate what I mean.
I,ve tried the select color/ erase tool but find that it select the white from all parts of the picture, even from other colours.The picture is too complex for the freehand mask tool and time consuming.
Is there another way, or even a plug in that could vouch for?
Using purge command in AutoCAD 2012 , my windows get restart with blue dump.
I tried everything including..digonestic mode, 3gb swithing ,windows update, dot net update, windows firewal/antivirus desbled.
some times while using purge command its give a display error(attached ).I tried using windows 64 bits, but problem remains the same.
A few times a day my sketch fonts (for dimensions) go restarted. The cure is a reboot, but it only lasts a few hours.
View 9 Replies View RelatedI just bought Photoshop CS5 this weekend, so I'm brand new to everything. I had edited a photo of my sister last night and went to save it by "save as" and I had made a seperate folder in my "pictures" library. Today I went to pull up the photo to show my sister, but the whole folder wasn't even there.
So I went in and re-edited the picture and saved it, recreating the folder and paying closer attention to what the picture was saved as (at the time I first saved it I hadn't realized that it was saved as a .PSD so this time I made sure that I saved it as a .JPEG). Still the folder itself isn't showing up. How can fix it/what am I doing wrong?
How do I add new photos to a saved Book in LR5? When I put new photos into the film strip a brand new book is started! Also, if the Book is intended for Blurb, do the photos in the film strip have to be jpeg or does LR5 convert raw files for me?
View 1 Replies View RelatedWhen I create a saved book in Lightroom 5 Book Module, the number of photos is listed to the right of the saved name in the Collections list, but there are no photos displayed in the Book itself. If I leave the Book Module and return, there is no change, all I see is the standard startup book template with a few blank pages.
View 5 Replies View RelatedI have just returned from holidays,took 1000 pictures that all have a date on them. Is there an less time consuming way of removing this without having to use the clone stamp tool for each one?
View 5 Replies View RelatedI have a very large catalog that I am wanting to clean up and remove files from my computer.
I am wanting to put the images on to a DVD, what is the best way to do that?
Export to catalog and then point to the DVD?
I have used PEDIT to join multiple polylines, which now appear as polylines. But when I use QSELECT to show all open (non-closed) section, one polyline still shows up as open.
I've attached the file I'm working on. The polyline in question is the green outline on the object on the right.
i want to have multiple offsetoutlines on a closed or non-closed path. with "offset path" i can make only one additional outline but i need multiple?
i searched all over the net for answers with no success.
I have version 7.
downsizing my photos useing the `save to web' option, thus reducing the pixels so that I can use them on my web site. However, something strange has suddenly happened when I use the save to web option and instead of being saved in the new smaller format, my pictures simply morph back to their origional size.
In my lightroom library I have created a collection set called "Wedding". As I have 1000 photos from my wedding, within this Collection Set I have created 10 or more Collections to organise these photos (Ceremony, Reception, First Dance, etc.).
I have created a new 'Book' which as expected, has created a new Collection within my 'Wedding' collection set.
When I first create the book (before saving it) it seems like I can click on a page, then browse my Collections and add the photo that I desire to the page.
After I have saved the book, I can't so this. I want to work on my book later, and use my existing organisation of photos, and add photos to my books from these collections.
I know I am missing something basic (I am new to lightroom). I don't understand why I can't add a photo to my book after I have saved it. Each time I click on one of my other collections, a new unsaved book appears in the main project window.
I have worked out that if I copy all my wedding photos into the new "Book" collection, then my photos are available for use - but this defeats the purpose of organising my photos into separate collections, and it doesn't seem like you can create a sub-collection within the Book project.
I created a book in the lightroom 4 book module using a photo catalogue. This photo catalogue is updated with new photo every week in the library module, and I would like to be able to use these new photos in the book module. Is there a way to sync the library and book module so when I add some picture in my catalogue in the library module the new photos will appear in the book module?
View 8 Replies View RelatedI have saved my photos in RAW format and imported them into Lightroom. I have then made changes to them and exported them from Lightroom as JPEG files. However, when I go to a printing kiosk and get the photos printed, they are all darker than what they displayed in Lightroom. What do I need to do to be able to print accepable photos?
View 3 Replies View RelatedI think I chose the wrong option when I saved a book, I clicked on save only used photos, I now cant add more photos. I think I should have saved a virtual copy. Do I have to start again?
View 5 Replies View Related