Lightroom :: Not Synchronizing Or Importing?
Oct 17, 2012
I am using Lightroom 3 on a Windows 7 PC.
According to Windows Explorer (and other software) I have over 50,000 graphic files, yet Lightroom will only catalogue about 35,000. One folder for example shows up in Lightroom as having 35 files, Explorer says 394. I try Synchronise and it initially reports "Import new photos 357". Then it reports "Import in progress", then "no files found"!
I try Import and all the photos in that folder are shown greyed out with nothing to import.I tried building a new catalogue but that didn't work. It imported around 35,000 of them only. A second run imported a few more but there are still around 15,000 missing fro the LR catalogue
View 4 Replies
ADVERTISEMENT
Apr 27, 2012
After installing LR4 I imported the PSE10 catalog. No problems. But when I later import more pictures into PSE - is it possible to add these pictures automatically to the LR catalog without importing the pictures once more? Or do I have to import the same pictures once more into LR and therefore have to copies of each new picture in two different folders - one for PSE and one for LR? So far I don't think the auto import will work, because as far as I understand
1)all the new pictures that PSE saved then will be moved to another folder and therefore will be missing afterwards, and
2)auto import will not monitor subfolders.
View 3 Replies
View Related
Sep 26, 2012
My images won't always sync. Basically I loaded images into Lightroom 4.1 using the auto tone feature. What I'm attempting to do is simply copy my settings from one image with exposure and contrast both set to "0" then syncing them to the rest of my images. (700+) I like the auto tone for sahdows/highlights, and white/blacks, obviously the exposure has been the issue with auto tone. However I find when i can start with my exposure and contrast at 0 this gives me a great starting point. But it won't sync all of them.
View 1 Replies
View Related
Oct 18, 2013
I'm trying to synchronize "Noise reduction" settings on a set of 952 photos (which are actually smart previews), using LR 5.2, and after I click apply I get the following error:
An internal error has occurred: <AgErrorID>10003</AgErrorID>
I have tried with only 3 photos selected and it worked fine. But it seems LR is not properly handling the large number of photos.
View 7 Replies
View Related
Sep 29, 2013
I'm trying Lightroom 5, before buying. If I add a Tag to a photo in Lightroom, I don't seem to be able to see that Tag in PSE11, on the same photo. Is there any way of doing this automatically? (Using Nikon D60 and Raw format).
View 2 Replies
View Related
Mar 2, 2013
LR3.6 started to fail to Syncronize folders. It also doesn't show only NEW photos on Importing fron hard drive, as it always has.
When I choose not to "show Import dialog" while synchronising a folder, it shows the correct number of new photos in a folder. But when the import starts there's a blank field and nothing happens. This can last for a whole day. Here is a screenshot.
The second problem is with Import.
When I start "Import" or mark "Show import dialog before importing" in syncing a folder it shows me all the photos, despite I choose "Add", "New Photos" and "Don't Import Suscected Duplicates".
I havent changed any preferances, it all just started to happen lately.
I'm using Raw Photo Processor plug-in for external developing, I thougt this might be the cause, but I've been using it for a long time, and the problems started several days ago.
View 2 Replies
View Related
Feb 2, 2013
In the past I keyword in photo mechanie and then synchronize in Lightroom and it brings in the keywords, but leaves the pictures as they are, which usually is at the imported stage with the camera default setting applied.
However now when I do it it simply imports the keywords and wipes all previously applied settings including the camera default settings that I used on import.
View 2 Replies
View Related
Apr 6, 2012
I using the Trial version of VisualStudio X5. I am wondering if there's a "best" way of synchronizing two different videos of the same event. Example: Say I have one camera that is of someone shooting a rifle. The other camera is of the target impact. Now say I want the video to show this person shooting the rifle, with the target impact shown in a smaller window superimposed on the main video. What is the best way to make sure the two videos are in sync with each other?
View 4 Replies
View Related
Jun 5, 2011
When a separate-system sound is used, how can it audio be synchronized with audio that is recorded on-camera? Is there a tutorial, procedure or technique to easily synchronize audio tracks from audio recorder into a video that already has audio?
View 1 Replies
View Related
Oct 19, 2012
I have found recently that surfaces that are sampled in profile views are not synchronized when the drawing is opened. This is incredibly frustrating when I'm just opening a file to plot a new copy. If I forget to resynchronize the drawing, the sampled profiles will not plot.
Is there a system variable I might try to toggle?
View 9 Replies
View Related
Nov 21, 2012
Seems to happen randomply, but my structures and labels disappear when synchronizing.
View 7 Replies
View Related
Jun 28, 2011
My Architecture office is using Mac Pro's with OSX and Parallels to run Windows 7 and Revit 2011. We are having issues with getting everyone to be able to work synchronize to the Central File. If one workstation (workstation 1) intially creates the Central File, puts it on the server then creates a local from the Central File they have no issue when synchronizing to Central. However if another workstation (workstation 2) creates their own Local File it does not synchronize to central, it tries and an error of "File Failed to Save" pops up everytime.
The Central File location is the same on both workstations (ex. \psfFirmProjectsActive ProjectsProject# and nameConstruction DocumentsDrawingsCentral File Name}.
We have also turned off all antivirus and firewalls to elimnate that as an access issue.
how we may be able to get everyone working with Local Files, and Synchronizing to Central?
View 9 Replies
View Related
Feb 4, 2011
I have 4 computers sharing tool palettes on a network. Whenever a user updates the palette with a new block, he has to export the .xtp file on the network and every other users has to reimport the palette in order to see the changes.
We're in the middle of a big clean up since we just got our new Autocad 2011 license and the palettes change pretty much every day, whenever we find time to reorganize it.
Is there a way to skip the export/import part when modifying a tool palette? I mean we are all using the file on the network right, so why doesn't it update on modification? At first I thought the palettes would update on startup, at least, but it seems that every single user has to export first and then import the .xtp file every morning or so.
It feels like once the palette on the network has been imported, the modifications we apply on the said palette are local, as if autocad would copy the one on the network instead of running it live, which makes it harder to keep it synchronized on every machine.
there's a way to work around that export/import sequence and get this whole palette thing to work in sync.
View 9 Replies
View Related
Oct 24, 2007
is there a way to stop the synchronization at the start? i would like to synchoronze manually later.
any system variables?
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 8 Replies
View Related
Nov 26, 2012
I have some drawing files that I keep on synchronizing manually everytime I open them just to show the EG, FG and Pipes properly to my profile view. I've already checked everything that could possibly cause this problems like name of my shortcuts, their location etc. etc. ...some of my files worked just fine so I'm wondering what I'm doing wrong with some that has this problem. Im using C3D 2012.
View 3 Replies
View Related
Jan 29, 2013
when I am trying to synchronizing to central I get a message twice saying "inches to the fourth power." then another message saying "file not saved."so then I find myself having to exit revit and start over with a new local file.
I did notice that when one person had a view or sheet open that I needed to work on that is when the error came up the most. so when the three of us would complete a task we would have to synchronize right after that task e.g. if I had several lights to place on the RCP I would place one light and synchronize and then place another light and synchronize. If I tried to do too much or waited too long to synchronize the error would come up.
View 5 Replies
View Related
May 11, 2012
I have a file that looks like it is going to open nice and fast and then it gets stuck at 50% synchronizing references. It literally takes over 5 minutes for the file to come completely up and ready to work on.
In the file I have an existing ground surface data reference and two corridors (with alignments, profiles and profiles views) that are basic access roads roughly 1200' long each with a very basic assembly. I also have a pipe network data referenced that is just a bunch of pipes that represent existing utilities crossing the access road so I can show them in cross sections. The final thing I have in here are 50' cross sections for each of these access roads.
why does it take me 5+ minutes to get into this file?
View 4 Replies
View Related
Sep 6, 2013
I have some storm sewer alignments that I've put into profiles in C3D 2011. The pipe network that I used to create the alignments from is a reference created from a data shortcut. I've created profiles of these storm sewer alignments, and the station labels for the storm structures are displayed at question marks until I go into the structure properties for each structure and link it to the correct alignment.
The problem is that whenever I synchronize my data shortcuts because someone has updated something, all of the links in each structure to the alignments disappears and I am back to? for my stations in the profiles and I have to go go fix it again. how to keep this from breaking?
I do see this recent message [URL] that appears to be a similar problem, but it was said in that thread that this problem was introduced with C3D 2012, but I am using C3D 2011.....
View 4 Replies
View Related
Sep 21, 2011
I have never gotten this to work, but had put little effort into it until recently. Thus far I have checked my project standards to make sure "match sheet views to view" is checked to "yes".
In both View drawing and the sheet- VISRETAIN is set to 1.
the VPLAYEROVERRIDESMODE is set to 1
I am working on drawings that are in my current project through project navigator. I am using ACA 2010 and not sure what else I need to do. I turn off all the unwanted layers in the view drawing, then create a sheet and xref in the view to model space- all the layers reset, and I again have to turn off all the unwanted layers. If I change a layer color in the view drawing, it does not change in the sheet drawing upon save and refresh.
I hate wasting time repeating the same task over and over....
View 2 Replies
View Related
Jun 8, 2012
I am trying to import my Eleemtns 6 catague into LR 4.1 and I cannot find the File>Upgrade Photoshop Elements Catalgo in the Library Mode. Am I missing something?
View 2 Replies
View Related
May 6, 2013
Why does LR4 not import ALL my photos from the selected folder on my portable hard drive? "Include Subfolders" is checked and "suspected duplicates" are allowed. The difference is about 10,000 photos per the info from Windows Exployer (approx. 175,000 vs 185,000 files). I can view the missing photos in exployer and not in LR4. I have tried deleting the catalog and starting from scratch. I have tried importing from subfolders. Sometimes I get different results, but not much different.
View 3 Replies
View Related
Nov 2, 2013
In importing raw files as DNG the photos are coming in as b&w next to JPEG photos of same image in color. Why? I can change the b&w to color in the develop mode. How do I get the raw images to import as DNG in color.
View 4 Replies
View Related
Mar 26, 2013
I just got lightroom and when I try to upload my old albums from my hardrive (all taken with the same camera) not all of them will load and the importing bar in the top left freezes.
View 2 Replies
View Related
Apr 7, 2012
I have a Canon Rebel XS 1000D that I have been recently shooting RAW images with. However, when I go to import the .cr2 files into LR, it says that it does not recognize the format.
View 6 Replies
View Related
Oct 12, 2012
I am shooting raw (D800), importing with import settings set as none or zeroed and when they open in LR the image is clearly processed (as if it was auto toned or something) where is the flat raw image i deserve?
View 3 Replies
View Related
Apr 28, 2013
Does "Import from another catalog" import photos already in the target catalog (i.e. duplicates), or only photos not already there?
View 4 Replies
View Related
May 17, 2012
In the import window I'm making a new map called 'ART' I select my pictures and import the pictures.
But after importing I can't see the map 'ART' anymore. Only the map of the date I made the pictures.
Why the map ART is hidden?
View 6 Replies
View Related
Dec 13, 2011
I upgraded to LR3.6 today for LR3. Now Lightroom cannot read any files I try to import. I tried re-installing. Would it be safe to overwrite 3.6 with 3.0?
View 7 Replies
View Related
Aug 3, 2013
Lightroom stops importing, the progress bar stops moving. After quiting Lightroom and trying to sync the folder it happens again. There are no strange fileformats in the folder, just straight JPG and XMP. This is pretty annoying - such a basic functionality should work out of the box.
I've read that the german character "ß" could be the cause (so every file tagged with German Street Names in it will stop LR from working! Excellent.) – and the release candidate 5.2 should fix the issue. BUT: I am not very fond of installing a release candidate; what happens later, when the final version is released? Does the automatic update function its job? Or do i have to fiddle once more to get the final version working?
View 2 Replies
View Related
Jun 23, 2012
I started editing a session on my laptop using LR3. I now want to move them to my desktop and edit them on LR4. (I know I need to make them the same version, but alas...) When I try to import them, they are greyed out and no allowing me to import. I saved them as dng files on a flash drive to move them over.
View 2 Replies
View Related
Feb 2, 2014
When I go to the import dialog in Lightroom 5.3 and I select one of my 3 networked hard drives (hosted on a Mac) I can only see the directory structure of one of my drives in lightroom my Y: Drive (for videos) shows up properly, but when I select the X: drive (for Photos) it doesnt show any folders. When i use windows explorer I can see the structure just fine. I have tried selectring. include subfolders.. makes no difference
I cant also see in the destination, area the folder listing
why cant it see the folders? all three network drives are formated the same way, hosted on the same machine
If i click on the arrow button point right and select other source I can navigate in the popup window to the proper drive / folder but why wont it should up in this winddow
View 2 Replies
View Related
