Revit :: Erase Portion Of Two Buildings Where They Overlap
Aug 27, 2011
I am trying to find the best way to make the wall/roof shown below. I have experimented with the normal route of using walls and roofs with no luck, then I tried a conceptual mass, then I tried model in place component which is how I made the model below and that worked to get the exterior form I need, but I cant void the interior part of the crossing forms so I can finish the floor plan on the interior. I need to somehow erase the portion of the two buildings where they overlap so I dont have the interior wall of the smaller building. I use revit architecture 2010.
View 3 Replies
ADVERTISEMENT
Nov 7, 2013
I want (no need to!) erase the long tail 'f' on my this logo. So I added a white text box and filled it in. (see figure 2) That worked until I wanted to put the logo on a colored background.
I originally did this on Microsoft Word. The Illustrator people told me that this would work and so I spent a boatload of money this stay at home mom does not have.. and now I'm awfully frustrated because 14 hours later....lots of tutorials later. I'm back to square one.But, I did learn a lot of info that I don't need to know.
Besides the fact that I looked at about 5,000 different f's in fonts.
View 13 Replies
View Related
Dec 9, 2013
I have a problem with my revit 2013, I have to change one of my walls structure, but as soon as i hit ok the message "Pads can't overlap (but can share edges)" pops up, I cant understand where the problem comes from because I am not changing pads boundary!
View 2 Replies
View Related
Mar 9, 2013
How to avoid the overlap between the level sign and the drawing?
I’m wondering concerning the default behavior of the Revit regarding the level signs. In the screenshot below, a wall of 9 meters is drafted in the indicated location while its 4 elevations are displayed next to it.
the north elevation has an overlap with the level signs and also the south elevation is at the end of the level signs. how to manage this problem and also based on what these levels are set this way (by design).How the overlap might be avoided?
View 4 Replies
View Related
Jul 29, 2013
I have a project involving 3 programs. I am creating a planned development in 3d to be 3d printed when finished. The project is a 5 acre tract containing 8 buildings. I have built the surface in C3D and each building in Revit. The buildings are not in the same Revit file. For my solid work, I will bring the files over into 3ds Max Design to section into smaller quadrants to build in the 3d printer.
The questions:
Would it be better to import the surface into Revit to merge surface and buildings together?
Would it be better to import the buildings into C3D to merge entities?
Would it be better to bring those entities into 3ds Max and then merge them into one? Will 3ds Max Design allow me to insert entities accurately in the environment?
View 6 Replies
View Related
Jun 11, 2013
I have had numerous problems trying to print from 2014 using the setting "Visible portion of current window". This feature was never that good, anyway, but now it seems to be WAY worse. I'm spending 5-10 minutes to just send something to the printer that should only take 5 seconds.
See the attached images of what I see on screen, the print dialog boxes and then what I actually get. The "Center" option doesn't function properly and now I must manually adjust the margins to print what I see on the screen.
View 2 Replies
View Related
Nov 23, 2011
I am having trouble getting the erase tool to erase part of an elipse shape in Corel Draw. I select the erase tool and click and drag across the part of an elipse that I want to get rid of (so far so good), then I release the mouse and an outline of the nib tool is left behind.
View 5 Replies
View Related
Jan 20, 2014
What I am trying to do is to model a roof using Revit Lt so that the roof tiling and battens carry on over the gable wall. Is it possible to add a void profile to the roof slab in order to achieve this or do I need to model a small section of roof to just cover the wall portion?
View 3 Replies
View Related
Feb 18, 2013
Wblock when run from the command line used to erase the entities selected, now it seems it does not, but the dialog box shows an option to keep or erase the selected entities.
Any variable name that controls this functionality?
View 1 Replies
View Related
Apr 15, 2013
I am wanting to start using buildings in my art, what is the best way to do this? ... do i use the pen tool and cut the buildings out of an image or could i create the buildings from scratch?
View 9 Replies
View Related
Apr 27, 2012
I want to create 2.5D Buildings, like at google maps website.
Example:
How to do it?
View 9 Replies
View Related
Sep 21, 2002
I know how to crop pics to get rid of unwanted image, but how do you straighten up buildings which are 'leaning' over? I've got some pics of tall buildings and want to s-t-r-e-t-c-h the tops of them so that they look vertical cos they look a bit strange at the moment.
View 1 Replies
View Related
Dec 3, 2006
I took this picture in Vegas and would like to straighten out the buildings. For the life of me, I cannot remember the correct term to search under.
View 9 Replies
View Related
Feb 20, 2013
I'm trying to color a site plan and I'd like to add shadows to buildings and trees, but don't know how to go about it. Drop Shadow is not going to work--I need to do this somehow manually.
View 7 Replies
View Related
Apr 10, 2012
How to construct buildings using maya or 3ds max which i have in a photograph?
View 4 Replies
View Related
Aug 5, 2012
I want to create 2 visual styles for buildings in autocad 2011, I have the main building then a proposed extension to it! I want to show the original building in say x ray visual style n extension in realistic?
I could do something in paperspace using polygonal viewports, but unsure how to do this?
View 9 Replies
View Related
Aug 22, 2012
I've been planning on making a Sci-Fi city in paint.NET recently, after viewing the pictures others made in photoshop and other programs (example)
I just tried to make one. It didn't go so well.
So, my question: how would I go about making one of these? What would I use to draw the buildings? (Line tool leaves jagged edges at 1 when trying to color.)
View 20 Replies
View Related
Jan 31, 2012
Have a lisp or other addon to make pline segments perpendicular after digitizing buildings.
View 2 Replies
View Related
Jun 4, 2012
I have a site plan that has buildings at different angles. How do I rotate my view so that the buildings are displayed at a normal x,y view?
View 1 Replies
View Related
Feb 25, 2011
I'm now using a different computer. I have a drawing with an existing surface and contours. I have two buildings on site that I'd like to mask the contours that run through them. I used the mask feature for one of them, but that is the limit. How can I mask the contours so they aren't running through the other building.
View 8 Replies
View Related
Dec 27, 2013
Consider a photo with the buildings are falling over backwards for the obvious reason. In Photoshop CS2 one could select Crop, click the “Perspective” box, then drag the top corners independent form one another to align them with some vertical lines in the photo. If there is no vertical line near the edge, one could temporarily drag the side of the crop tool to a vertical line before using the top corner to slant the vertical side of the crop tool to follow a vertical line in the photo. Then drag the two vertical sides of the crop tool back so that their bottom corners coincide with the bottom of the photo, double click, and your building has vertical sides. How can I do this in Elements 12?
View 2 Replies
View Related
May 21, 2012
I'm working on a drawing of a jobsite. The jobsite has multiple buildings surrounded by water wells. Each well has a unique ID, ie MW-7. In model space everything is drawn at a 1:1 scale. The jobsite is quite large, and in layout view my scale is set to 1"=100'. Everything looks visually pleasing, text size, block sizes (symbol for the well location, etc.). However, I need to create a new layout that zooms into a particular portion of the site. I need my scale to be roughly 1"=50'.
My question is this: How can I set my drawing so that when I zoom into the area of interest, the block symbols and the well IDs stay the same size and don't crowd up the entire page? Otherwise my well IDs are huge! I think it might have something to do with annotative scaling, but I can't get it to work properly. This drawing is being done in AutoCAD 2012
View 6 Replies
View Related
Jun 4, 2013
I have a problem when designing one building in 3d. The thing is i want to create a 3d model made only out of 3d solids. So there is this complex ceiling, I made out of 3 meshes and above it, in the above floor, there's a non complex plate.
[URL] ........
This meshes are made based on the actual dimensions of different sides of the floor, are unique and are good approximation of the actual building's ceiling. So, I want to make 3d solid that would have the same bottom shape and the same - even top as in the picture if the space between the objects would be filled out.
View 5 Replies
View Related
Feb 18, 2013
I need to be able to do simple floor plans for commercial and residential buildings, what version of autocad do I need?
Will autocad 2013 LT be good enough?
View 7 Replies
View Related
Jun 11, 2012
I have a site template as jpeg photo
I want to make same effect as on this photo with buildings in background.
I can make it with GIMP black/white, but how can i make it yellow???
View 4 Replies
View Related
May 17, 2012
I have a rather large surface and am trying to add hide boundaries to the existing houses/Buildings footprints however whenever I do my whole surface disappears.
View 4 Replies
View Related
Oct 29, 2013
i want clear list of main layers lines weights and colors for residential buildings? (we use stone out wall and normal blocks inside)
I try BS 1192 and ISO but they are misappointed me.
for ex they use
1-ext wall white .5
2- hatch blue .18 !! (not clear color and not light weight)
3- int. wall color: 9 weight: .25
View 3 Replies
View Related
Oct 5, 2011
I have a polyline and need to check whether it overlap itself. What do I need to do in vb.net?
View 9 Replies
View Related
Mar 3, 2011
I am trying to overlap two images but one is really dominating visually and is also really busy. I'd like to 'fog out' the dominating picture without losing a lot of information from it. I think making the colors less vivid would enhance the colors of the other image, but maybe there's more I can do? The images are biological and I am working on a potential scientific journal cover page, so I can't just remove things or distort to the point where it is cartoonish. I know nothing about image processing, so I feel like I'm probably complete unaware of simple methods that could do amazing things I was unaware of above and beyond just toning down contrast or saturation.
View 4 Replies
View Related
Mar 27, 2012
I would like to overlap the viewports one to another like using Draworder command with raster image. see my attachment to get what I mean.
View 4 Replies
View Related
Dec 15, 2012
When using Brush, the opacity doubles whenever my stroke overlaps whatever I've already filled. What setting prevents this?
View 1 Replies
View Related
