AutoCad 2D :: Multiple Buildings Surrounded By Water Wells - Scaling
May 21, 2012
I'm working on a drawing of a jobsite. The jobsite has multiple buildings surrounded by water wells. Each well has a unique ID, ie MW-7. In model space everything is drawn at a 1:1 scale. The jobsite is quite large, and in layout view my scale is set to 1"=100'. Everything looks visually pleasing, text size, block sizes (symbol for the well location, etc.). However, I need to create a new layout that zooms into a particular portion of the site. I need my scale to be roughly 1"=50'.
My question is this: How can I set my drawing so that when I zoom into the area of interest, the block symbols and the well IDs stay the same size and don't crowd up the entire page? Otherwise my well IDs are huge! I think it might have something to do with annotative scaling, but I can't get it to work properly. This drawing is being done in AutoCAD 2012
View 6 Replies
ADVERTISEMENT
Aug 5, 2012
I want to create 2 visual styles for buildings in autocad 2011, I have the main building then a proposed extension to it! I want to show the original building in say x ray visual style n extension in realistic?
I could do something in paperspace using polygonal viewports, but unsure how to do this?
View 9 Replies
View Related
Feb 25, 2011
I'm now using a different computer. I have a drawing with an existing surface and contours. I have two buildings on site that I'd like to mask the contours that run through them. I used the mask feature for one of them, but that is the limit. How can I mask the contours so they aren't running through the other building.
View 8 Replies
View Related
Mar 1, 2013
I need to scale up about 300 circles (manholes) but i need to hold the center point of each manhole. is there a command for this so i don't have to scale each individual circle?
View 6 Replies
View Related
Nov 15, 2006
i am trying to scale down about at least 80 GIFs but i need to do them all together because each GIF is not the same size. But i need to retain the proportions. thats why i have to do them together. Does anyone know if you can do that in PS and if so how.
View 4 Replies
View Related
Jun 20, 2013
I had an 18MP picture (3456x5184 pixles) and I was trying to fit it into an A1 canvas of a 100 dpi so I used free transformation to scale it down. Later on, I have decided to make the canvas of 150 dpi instead of 100. Would increasing the resolution now make my picture look pixelated on the canvas? I know that the original photo would look alright on a 150 dpi.
I'm using photoshop CS2.
View 7 Replies
View Related
Jul 4, 2004
I have a pic that has a really pretty view of a bridge over a little stream. Only problem is the water is covered with slimy green algee.
View 5 Replies
View Related
Mar 7, 2012
any tutorial to transform a brush of water, in "water authentic"? Color, brightness, etc .........
View 4 Replies
View Related
Jul 7, 2011
I want to make a fountain that has water jets that cause ripples when they hit the water. I have tried the basic reactor water and Pflow setup, as well as super spray, but neither seem to work. Is there any way to accomplish this without "faking" it by doing something creative with the water's texture?
View 9 Replies
View Related
Apr 27, 2012
I want to create 2.5D Buildings, like at google maps website.
Example:
How to do it?
View 9 Replies
View Related
Dec 4, 2009
Any way to build or download a linetype that can display as a thick dashed line surrounded by 2 parallel lines on either side of it?
We use them to denote underground stormwater pipes in our survey models.
Currently I need to manually set each line to a polyline, give it a global width, and then draw a DLINE of the same width from endpoint to endpoint. The down side is that not only is it laborious, I also have to set the Z values to zero, so we lose the elevation feature of the pipe in the model.
Ideally it would need to have enough functionality to alter the spacing of the dashes, and the width of the line.
View 9 Replies
View Related
Jan 31, 2012
Have a lisp or other addon to make pline segments perpendicular after digitizing buildings.
View 2 Replies
View Related
Jun 4, 2012
I have a site plan that has buildings at different angles. How do I rotate my view so that the buildings are displayed at a normal x,y view?
View 1 Replies
View Related
Feb 21, 2014
New Responsive Scaling feature is great.
It's enabled me to add an Edge Animate file to my responsive Wordpress site using the Edge Suite Plugin.
Only problem for me is that although the 3.7MB file I’ve created scales perfectly on all devices it struggles to play on smartphones. (I assume it's too big and too power hungry to play smoothly on smartphones - even since I've added a pre-loader.)
So, in an ideal world, what I need is a separate low res Edge Animate file that only plays on smartphones.
Failing that, I’d be happy with a 'Down-level Stage' image which could replace the Edge Animate animation.
For a moment I thought I’d found a solution when I came across this Adobe TV movie: [URL]
Unfortunately this clever solution only works when the new Responsive Scaling feature is NOT selected. As soon as it is selected, the animation no longer changes from one layout size to another when the browser window is reduced.
I don’t mind whether the fix is in Edge Animate, Wordpress or the Edge Suite Plugin - I just want a solution!
View 3 Replies
View Related
Jun 4, 2013
I have a problem when designing one building in 3d. The thing is i want to create a 3d model made only out of 3d solids. So there is this complex ceiling, I made out of 3 meshes and above it, in the above floor, there's a non complex plate.
[URL] ........
This meshes are made based on the actual dimensions of different sides of the floor, are unique and are good approximation of the actual building's ceiling. So, I want to make 3d solid that would have the same bottom shape and the same - even top as in the picture if the space between the objects would be filled out.
View 5 Replies
View Related
Jul 19, 2012
Rightly or wrongly I have a shape drawn with line sement and pen
I want to fill the inside of this white, how do I do that?
View 4 Replies
View Related
Feb 18, 2013
I need to be able to do simple floor plans for commercial and residential buildings, what version of autocad do I need?
Will autocad 2013 LT be good enough?
View 7 Replies
View Related
May 17, 2012
I have a rather large surface and am trying to add hide boundaries to the existing houses/Buildings footprints however whenever I do my whole surface disappears.
View 4 Replies
View Related
Jul 14, 2011
When I make a selection in a picture, the selection dotted line shows a coloured border, which is the colour of the second choice in the Materials palette. Especially if I make an addition to the selection, this coloured line runs right through the selected figure. If I copy the selection, undo the selection and then paste as a new layer, the coloured border, especially in added areas, remains visible.
how I can get rid of this strange artifact? I didn't use to have it, it emerged a few days ago.
View 6 Replies
View Related
May 1, 2009
I took a screenshot of an image I'm trying to replicate in Photoshop.
It's a simple right facing, filled arrow, encampassed in a circle. There's a perfect drop shadow/gradient effect going on to add a 3d effect. I'd like that on a transparent background if possible.
View 5 Replies
View Related
Oct 26, 2012
I have a bitmap heightfield where the black is low and the white is high, except in the deepest depths of the black pits lies a single white pixel...
what is thebest way to blacken those lone white pixels surrounded by Blacktried a black ovellay, but cant get the right blend mode.. I can't replace color, because the highest spots are also white...
View 10 Replies
View Related
Jan 28, 2011
I am using Xara's Photo & Graphic Designer for the first time and slowly getting acclimated to the program after using Ulead's Photo Impact for 6 years.
Just one really basic question. I have three elements in my final design: two seperate lines of text surrounded by a black outline. To save this as a single graphic (.gif format), what do I need to do? With Ulead all I had to do was select all, right click and select merge as one, then simply save in whatever format I wanted to the destination of my choosing.
Is there a similar "merge as one" command in Xara or do I select each element in my graphic, then choose save from the file menu?
View 3 Replies
View Related
Apr 17, 2013
I have two layers: a background in yellow and a cropped image in the other layer. Now I want to dissolve the cropped image in the background, how can i do that automatically? I know I have the smudge tool, but the results are not so good for me...
[URL]
2.8.2
View 3 Replies
View Related
Apr 17, 2013
I have two layers: a background in yellow and a cropped image in the other layer. Now I want to dissolve the cropped image in the background, how can i do that automatically? I know I have the smudge tool, but the results are not so good for me...
[URL] .......
2.8.2
View 7 Replies
View Related
Oct 29, 2013
i want clear list of main layers lines weights and colors for residential buildings? (we use stone out wall and normal blocks inside)
I try BS 1192 and ISO but they are misappointed me.
for ex they use
1-ext wall white .5
2- hatch blue .18 !! (not clear color and not light weight)
3- int. wall color: 9 weight: .25
View 3 Replies
View Related
Aug 16, 2011
In Coreldraw 12, I often use combine to end up with a one solid shape with many holes in it. Often I want to add a color inside one of the holes, much like a coloring book, but there is no shape there, it is just empty. What is the quickest way to create a solid that fills that hole exactly?
View 2 Replies
View Related
Apr 15, 2013
I am wanting to start using buildings in my art, what is the best way to do this? ... do i use the pen tool and cut the buildings out of an image or could i create the buildings from scratch?
View 9 Replies
View Related
Sep 21, 2002
I know how to crop pics to get rid of unwanted image, but how do you straighten up buildings which are 'leaning' over? I've got some pics of tall buildings and want to s-t-r-e-t-c-h the tops of them so that they look vertical cos they look a bit strange at the moment.
View 1 Replies
View Related
Dec 3, 2006
I took this picture in Vegas and would like to straighten out the buildings. For the life of me, I cannot remember the correct term to search under.
View 9 Replies
View Related
Jul 29, 2013
Win 7 64 bit
How can I use the bucket-fill option to fill an area surrounded by a dottedline?
The dotted line is a path; so if I use a line for the dots, the bucket-fillworks.
But how can I step back after filling to change the path's line into dotsagain?
View 3 Replies
View Related
Feb 20, 2013
I'm trying to color a site plan and I'd like to add shadows to buildings and trees, but don't know how to go about it. Drop Shadow is not going to work--I need to do this somehow manually.
View 7 Replies
View Related