I had an 18MP picture (3456x5184 pixles) and I was trying to fit it into an A1 canvas of a 100 dpi so I used free transformation to scale it down. Later on, I have decided to make the canvas of 150 dpi instead of 100. Would increasing the resolution now make my picture look pixelated on the canvas? I know that the original photo would look alright on a 150 dpi.
I'm using photoshop CS2.
A jpg image I'm working with loses resolution when placing. I'm suing a canvas of 695x423, trying both 72 and 300ppi (there's no difference). What silly mistake could be overlooked here? The shift in resolution is akin to looking at a image in InDesign in standard vs high quality.
View 5 Replies View RelatedI have a vector image in CorelDRAW X6 which i recently purchased. If i export the image as a JPEG or png at the original size the file is fine in the export preview screen. If i reduce the size of the image and than go to export it, the image is very poor, even tho it is still a vector format and haven't exported it.
I never had this issue in X5 and it seems that X6 doesn't hold the resolution when i resize it.
I created a selection, filled it and put text on top of it in a 72 ppi file and copied the group to an image with much higher resolution. I transformed the shape and text to make it bigger. Does doing this affect quality?
View 4 Replies View Relatedi am trying to scale down about at least 80 GIFs but i need to do them all together because each GIF is not the same size. But i need to retain the proportions. thats why i have to do them together. Does anyone know if you can do that in PS and if so how.
View 4 Replies View RelatedI'm working on a drawing of a jobsite. The jobsite has multiple buildings surrounded by water wells. Each well has a unique ID, ie MW-7. In model space everything is drawn at a 1:1 scale. The jobsite is quite large, and in layout view my scale is set to 1"=100'. Everything looks visually pleasing, text size, block sizes (symbol for the well location, etc.). However, I need to create a new layout that zooms into a particular portion of the site. I need my scale to be roughly 1"=50'.
My question is this: How can I set my drawing so that when I zoom into the area of interest, the block symbols and the well IDs stay the same size and don't crowd up the entire page? Otherwise my well IDs are huge! I think it might have something to do with annotative scaling, but I can't get it to work properly. This drawing is being done in AutoCAD 2012
How can I change image resolution in multiple images?
View 2 Replies View RelatedI need to scale up about 300 circles (manholes) but i need to hold the center point of each manhole. is there a command for this so i don't have to scale each individual circle?
View 6 Replies View RelatedProblem: How to enlarge (100 times) image of multiple intersecting low resolution contour lines wile avoiding pixelation?
Simple answer: It can't be done.
Second thoughts: Well, under some circumstances it can be done... sort of. For example if lines are orthogonal to begin with then simple re-sample to nearest neighbor algorithm will do fine. If lines are simple enough, then tracing them with pen tool and recreating the original lines at higher resolution by stroking the paths with a brush will do also. Also if original lines are smooth and thick enough then some re-sampling, blurring and leveling can work (anisotropic diffusion filter may work) but will produce smoothing artifacts at corners.
From what I can see the problem boils down to creatively converting the original lines to vectors (paths / shapes) and avoiding the whole messiness of raster anti-aliasing. But here we face additional problems: Adobe trace engine is not smart enough to recognize geometric shapes, intersecting lines, straight edges, orthogonal lines and mathematical curves - just try to trace a font and you will end up with a baggy monster. Additionally, it appears that in Photoshop center-line trace is not possible and you are limited to outlines.
New Responsive Scaling feature is great.
It's enabled me to add an Edge Animate file to my responsive Wordpress site using the Edge Suite Plugin.
Only problem for me is that although the 3.7MB file I’ve created scales perfectly on all devices it struggles to play on smartphones. (I assume it's too big and too power hungry to play smoothly on smartphones - even since I've added a pre-loader.)
So, in an ideal world, what I need is a separate low res Edge Animate file that only plays on smartphones.
Failing that, I’d be happy with a 'Down-level Stage' image which could replace the Edge Animate animation.
For a moment I thought I’d found a solution when I came across this Adobe TV movie: [URL]
Unfortunately this clever solution only works when the new Responsive Scaling feature is NOT selected. As soon as it is selected, the animation no longer changes from one layout size to another when the browser window is reduced.
I don’t mind whether the fix is in Edge Animate, Wordpress or the Edge Suite Plugin - I just want a solution!
I realize the nature of my question maybe asking the impossible, but I have a low res image I downloaded from the internet, placed in an InDesign page, blew it up and printed it out. I was going for the distressed look that it has, it looks ok when I print it out considering it's low res and I blew it up fairly large. However, it's a little too pixelated to look professional when printed. Are they any tricks or things I can do to make it look higher res for print. I've attached the image as well as a screenshot of the InDesign file so you can see it in context.
View 4 Replies View RelatedI am a Photoshop newbie and I have a series of graphics (all 72dpi from a website) that I would like to print in 300dpi. Is it possible to take a 72dpi .jpeg or .gif file and easily convert it to a higher resolution printable graphic? If Photoshop can't do it, is there any type of program that can?
View 1 Replies View Relatedi have some big .jpgs with low resolution say 10x10 inch at 72dpi.
is it possible for me to convert it to 2x2 inch at 300dpi?
We are designing some web graphics for a friend. By "we" I mean me and a guy who lives on the opposite coast.
He did the initial page layout/design as a PhotoShop tif, at 300 dpi, in layers and about 5 inches wide. The idea, on his end, was that it would be a small file size and, therefore, faster to download on my end. With me so far?
Anyway, I'm suppose to convert it to 800 ppi wide, 72 dpi, jpg. Sounds easy enough. Or not Do all the scaling and now the graphics don't look right. None of the layer effects are right!
How do I scale his graphic, for my purposes and, once it's the size I need it, have everything look the way he created it?
Example: Text at that 5 inch wide, 300 dpi size with a one point stroke on it looked find when the graphic was 5 inch wide and 300 dpi, but at 800 ppi wide and 72 dpi, it's all wrong
Is there a preference or something I should be clicking somewhere and I'm just missing it?
Im working for a geological firm that use timescales to describe their work (depths at times etc). I need to compress the time bar but not alter the text but cant find way to do it. Im only scaling in 1 direction.
View 4 Replies View RelatedI'm trying to create a high resolution version of a low resolution texture used in a game. I've found a pattern that I think is acceptable, from a real image.Now the question is this: how can I colorize the large image to that it is as resemblant as possible to the original one? I've tryed a simple colorize, but the result is not so good...
Original texture:
[URL]
The image to be colorized:
[URL]
I have recently installed Photoshop CS3 on a newer PC which runs Windows 7 Home Premium, after the programme was locked on a PC running Vista which died on me and which I have just had repaired. However since installing the programme, every time I turn my PC off and then on again next morning, I have lost the internet.
I have been getting around the problem by running the HP network check and the automatic repair that it performs is to "reset the Realtek PCIe FE Family Controller Adapter". However this only works until the PC is turned off again and then I have to do the whole process again. Is there a way to fix this problem permanently? I was hoping there would be an update from Adobe that might sort the problem, but Adobe don't seem to be able to work with that as they say the programme is too old and don't have online support for this.
I have followed everything that is suggested by HP i.e. rebooting the modem and router.
If I reset the PC to before the programme was installed the problem goes away. When I reinstall the problem comes back. Its definitely to do with the Photoshop programme, but I don't understand why.
there is Old picture in sizs 5" x 7".
I want to print this picture from lab of size 16" x 20".
Please can anybody tell me How I convert this picture in to biger size without any lose of resolution and Quality.
I convert the original picture in to TIF.
then Go to Image size increase the Percentage by 100 to 125.
and Again save this file into Tif with Name A1.
Then Again Open A1 do same size change 100% to 125% and save this by name A2.tif.
continue...
This is right way or any method.
why I suddenly lose all my loaded presets and also preferences (like zooming with the mouse wheel). I don't lose the presets altogether, but I have to go back and reload them again. This doesn't happen all the time, only occasionally and I can't fathom out why.
View 4 Replies View RelatedWhen I take a screenshot and paste it into photoshop I am losing a lot of color. Here I took a rainbow gradient and placed consecutive screenshots side by side.
The first bit is the original, then the first screenshot, then a screenshot of that, and so on. I've been looking for answers and found a few people with similar problems, but I seem to have all of the settings correct according to those solutions. I am using Win7 x64, I have the latest drivers for my video card (GeForce GTX580), the image is set to RGB, and my working space is sRGB IEC61966-2.1.
Whenever I try to save a picture (see guitar picture on website) to my hardisk, and open it in photoshop, the color quality substancially degrades. the black guitar from the website seems to turn to brownish black. how come? but when i open w/o using photoshop (within windows only), the color seems fine. just like the original from the website ....
View 9 Replies View Relatedi scanned a photo, then edited and scaled it with photoshop. but it lost quality after scaling.
how can i scale it without quality loss?
i scanned a photo, then edited and scaled it with photoshop .
but it lost quality after scaling.
how can i scale it without quality loss?
I created a collage type image in CS3 . It had 4 layers with a tiff size of 60mbs. as a psd file it was about 20mb. when i saved it as a jpeg it shrunk to below 1 mb. I can't print the jpeg larger than larger than a 5 x 7. what am i doing wrong? why would the jpeg shrink so much?
View 2 Replies View RelatedIn order to save hard-drive disk space I want/need to start compressing my Photoshop files. The Tiff-LZW or Tiff-ZIP compressions seems like a great lossless format alternative with apparent significant compression. Is anyone aware whether there is truly no loss of file information with these formats, or does some minimal degradation occur? Any thoughts on JPEG2000 lossless compression?
View 5 Replies View RelatedWondering if there is a loss of original full RGB information if changing color mode from RGB to CMYK and back to RGB. I understand that RGB has a wider color gamut and that if changing to CMYK that I will have a narrower color gamut. BUT, I want to know how if Adobe retains full RGB data after changing color mode to CMYK?
In other words, If I change from RGB to CMYK and back to RGB will I have all the original color data that I did with the original image? Does Photoshop "throw out" the full gamut information for RGB when switching to CYMK, so that when I do convert back to RGB, it is jsut looking for the comparable RGB color within the CMYK gamut now?
OR
Does Photoshop "know" the full color information regardless of in RGB or CMYK, but only changes that color information to fit within the CYMK color gamut while "remembering" what it's full color gamut WAS outside of CMYK?
If I do lose full RGB info, what's the best workflow option when using for print in indesign? Keep two seperate Photoshop files, one original RGB and one CMYK? OR just place into InDesign as RGB and change to CMYK when exporting as PDF?
Full HD Prores videos are after Photoshop (removing dirt from scanned film) and render back to Full HD Prores less sharp(best seen at the pointed feathers).Giving it back as psd or jpeg frames keeps the resolution but changes brightness and gamma.We also miss Prores HQ?
View 2 Replies View RelatedThis is just something that i have been wondering...
Basically, I saved a copy of of a PSD to a JPG (max quality)
Then I opened the saved JPG and removed a few guide lines and re-saved the file still at max quality.
My questions is, did data loss, or re-compression occur during this "re-save" process? Is the re-saved file now of lower quality than the originally saved JPG?
Im trying to turn in a image into a photocopy. In the filters drop down there the sketch option is not highlited so i cant access this option as well as extract, filter gallery and pattern maker in one section. The section with sketch is also not letting me acces artistic, brush strokes, pixalate and texture. also dimarc isant highlighted. i have reset to default work space reset all tools and brushes what else can i do.
View 4 Replies View RelatedPS7 on Win XP
Windows Explorer and some software bundled with digital cameras [Canon and Panasonic] warn when rotating a picture that there may be loss of image quality. Presumably it must re-compress the jpg image file?
In order to avoid that problem, I have been rotating image files in PS7, since no such warning comes up there.
Is there loss of image quality by rotating or cropping in PS7? I usually save jpg files at quality level 10.
I worked on an image in Lightroom, got the contrast and color perfect, and when I went to "Edit in Photoshop" it completely flattened out my photo by darkening most of my lighter areas and it looks awful. Check out the sky in these two images to see what I mean. I have LR3 and CS4.
View 5 Replies View Related