AutoCAD Civil 3D :: Multiple Surface Masks For Buildings
Feb 25, 2011
I'm now using a different computer. I have a drawing with an existing surface and contours. I have two buildings on site that I'd like to mask the contours that run through them. I used the mask feature for one of them, but that is the limit. How can I mask the contours so they aren't running through the other building.
View 8 Replies
ADVERTISEMENT
Jul 29, 2013
I have a project involving 3 programs. I am creating a planned development in 3d to be 3d printed when finished. The project is a 5 acre tract containing 8 buildings. I have built the surface in C3D and each building in Revit. The buildings are not in the same Revit file. For my solid work, I will bring the files over into 3ds Max Design to section into smaller quadrants to build in the 3d printer.
The questions:
Would it be better to import the surface into Revit to merge surface and buildings together?
Would it be better to import the buildings into C3D to merge entities?
Would it be better to bring those entities into 3ds Max and then merge them into one? Will 3ds Max Design allow me to insert entities accurately in the environment?
View 6 Replies
View Related
Aug 5, 2012
I want to create 2 visual styles for buildings in autocad 2011, I have the main building then a proposed extension to it! I want to show the original building in say x ray visual style n extension in realistic?
I could do something in paperspace using polygonal viewports, but unsure how to do this?
View 9 Replies
View Related
May 21, 2012
I'm working on a drawing of a jobsite. The jobsite has multiple buildings surrounded by water wells. Each well has a unique ID, ie MW-7. In model space everything is drawn at a 1:1 scale. The jobsite is quite large, and in layout view my scale is set to 1"=100'. Everything looks visually pleasing, text size, block sizes (symbol for the well location, etc.). However, I need to create a new layout that zooms into a particular portion of the site. I need my scale to be roughly 1"=50'.
My question is this: How can I set my drawing so that when I zoom into the area of interest, the block symbols and the well IDs stay the same size and don't crowd up the entire page? Otherwise my well IDs are huge! I think it might have something to do with annotative scaling, but I can't get it to work properly. This drawing is being done in AutoCAD 2012
View 6 Replies
View Related
Dec 18, 2013
I am trying to create islands of surface by multiple enclosed polylines as boundaries.
Each enclosed polyline has several 3d lines as drawing objects.
After creating the surface from the 3d lines I use "Select similar" to select all boundaries(enclose polylines) and add them as boundaries using the "Show" option.
However, it is not working and I do not see the islands of a surface.
View 2 Replies
View Related
Oct 18, 2012
I have a big hole in the ground in my model. Its easy to get the volume of cut with C3D. But I have a topsoil layer, weathered rock layer and then solid rock, I basically need to break them down into different volumes. The way I would normally do it is calculate the topsoil, then work out the weathered rock and minus the topsoil, then for solid rock cut I minus the topsoil+weathered rock. I have attached the 3 volumes I need for info.
View 8 Replies
View Related
Sep 17, 2012
i need to transition from a proposed to a future linetype part of the way down my profile. It's the same surface, just that @ station XX+XX.XX it becomes future. I need it a diff linetype to faded back, for example. Is there a way to do that? I'm thinking my only option is two create two surfaces, one propsed and one future. My situiation currently is that I already have one complete surface and would like to know if it's possible.
View 9 Replies
View Related
Nov 28, 2012
I am creating my Final Grading surface with from 2 surfaces - a proposed road surface and a proposed grading surface. (Note of roads within the road surface)
The issue is that when I paste the proposed road surface (that consists of several looped sections) over the proposed grading surface, the proposed grading surface within the looped road areas dissappears.
I have tried several options using boundaries for the inner looped areas on my road surface, and has altered my order of opterations for my final surface edits, and many other things also.
I have attached an image for reference.
View 9 Replies
View Related
Apr 19, 2013
Just as the topic says. I have about 40 manholes referenced to a surface that has no changed and I need to update them. I can go thru one by one and pick "structure properties" and change the surface. I did change the surface under the network options, but they all still reference the old surface.
View 4 Replies
View Related
Aug 28, 2012
When a file has many surfaces, gradings and sites manually delete them is slow ¿is there a method to select multiple sites, surfaces and gradings on prospector and delete them all at once and not one by one?
View 1 Replies
View Related
Jul 2, 2012
I am doing bulk earthworks with C3D 2013 and quite often I am modeling large dam walls with multiple raises, core sections, filter layers, etc so I end up with up to 50 surface models in one drawing. The process I follow involves modeling each raise of the wall by targeting an elevation 10 metres or so below NSL. I then use a volume surface to give me the intersecting boundary between the topography surface and the wall raise surface. I repeat this process for each raise/core/filter section - create volume surface to find intersection, extract boundary of intersecting volume surface, add boundary to wall raise surface, put both on a unique layer calculate volume - repeat for next wall raise - ad nauseum.
To speed things up a previous draftsperson created a shortcut button on the ribbon that does the volume surface trick with one click so all i need to do is hit the button, select topo, select wall raise and it gives me the volume surface between the two, all i need to do is extract the border and add it as an outer boundary to the wall raise. I would like to take this to the next level if possible and this is where I an stuck.
If my drawing consisted of a topography surface and "X" number of wall raise surfaces all named in a uniform fashion ascending numerically or alphabetically would it be possible to write a routine/shortcut button that did the following;
1.) Create a volume surface between topo & wall surface 1 - extract border as polyline - add polyline as outer boundary to wall surface 1 - move both wall surface 1 and newly created boundary polyline to unique layer.
2.) Repeat process for topo and wall surface 2
3.) Repeat process for topo and wall surface 3
.....and so on until all wall surfaces have had volume surfaces created between them and the topo?
View 7 Replies
View Related
May 17, 2012
I have a rather large surface and am trying to add hide boundaries to the existing houses/Buildings footprints however whenever I do my whole surface disappears.
View 4 Replies
View Related
May 23, 2013
I can't mask more than 1 area of an xref.
If I mask one area in model space, then I try to mask another, clicking no delete of previous boundary, it still won't let me do it. I need to mask many small pieces of an xref in the model space.
View 6 Replies
View Related
May 25, 2004
Is there a way to use multiple gradient masks in a single mask?
I'm working on a photo collage and when I bring in a new picture I would like to get rid of the hard edges. Creating a layer mask and then using the gradient tool to fade one of the edges of the picture works great. Is there a way to repeat this on the same mask so that I can use this same technique on the other 3 edges of the picture?
View 6 Replies
View Related
Aug 18, 2008
I would like to know if someone can please show me how to use multiple layer masks in an image? For example..I would like to do a curves adjustment layer and also only add contrast to a certain part of the image.
View 1 Replies
View Related
Sep 12, 2013
I have a large image, and want to use the new generator feature to automatically extract two specific areas of this image (which is on a single layer) to two separate files.
Simple enough to do the first, using a layer mask, and works beautifully. But I can't work out how to do another, without copying the main image layer.
View 9 Replies
View Related
Dec 2, 2011
I often have to do storm pond surfaces that (for the purposes of planning) are flat on the bottom. These surfaces are created from a combination of survey data and grading groups and the tin of these surfaces is perfectably acceptable. However, when contours are shown, the flat bottom is shown with contours jig-jagging all over the place.
The attached image shows a comparison of the same pond. The top was created with survey data and grading groups; the bottom was created using contour data only. The generated surface on the top shows the bottom contour going in different directions and has parts where the an expected contour is missing.
How to correct/manipulate the surface to show a proper flat surface?
View 6 Replies
View Related
Oct 22, 2012
Has instances where you set your tolerance for the maximum triangle lenth to say 50m to reduce the amount of triangles along the edge that run at long distances. When I do this I end up with multiple surface holes and I'm not sure why as there are points in the area.
I thought well maybe it's because i should've reduced my max triangles first then added breaklines. Would this matter? I also thought I could add a line to the surface to fix the holes vs. deleting surface lines along the entire edge of a surface for many many miles.
View 9 Replies
View Related
Nov 14, 2012
I am trying to add points into a surface. I have done this before without any problems, but now I am having issues.
When I ID points which makes up the surface it gives me the correct Z level e.g. 24.5m, however when I hover over the surface it shows me the surface name and a different z level e.g. 0.65m. What is the reason for this difference in z levels? I think this may be causing the issue I am having when I add new points.
I select the surface and use the 'edit surface command' in the ribbon, choosing add point.
When I add a point at the level I require(23.89m), it puts it in a lot higher than the surrounding area, so I tried to put the point in to the lower z levels (0.4m) it puts it in a lot lower!
View 5 Replies
View Related
Dec 10, 2012
My goal is coming up with the volume bounded by the design surface and the existing surface. I don't have the design surface modeled yet.
Do i need to create alignment offsets?. Alignment 1 profile view is also attached. Then Alignment2.
What about starting with alignment1 profile view? Since I have created a polyline as the design profile ?
how do I shrink labels? Where is it in the settings ; the Align folder had been check.
View 2 Replies
View Related
Oct 2, 2012
I am issues with DEM files that I am downloading from the USGS website.I download 24k, elevation for the area I need. I then choose staged 1 second, add a surface to a blank drawing, then upload the DEM files to the surface.
The surface imports correcty, but when I try to import points taken by a surveyor on the same drawing, they plot incorrectly.The DEM surface and the points from the surveyor do not correspond. Also, the DEM surface is in meters, not feet. I have tried changing drawing settings, datum types, coordinate types, etc.
View 9 Replies
View Related
Apr 4, 2012
Is there any way to change the referenced surface on a Surface Elevation Label. I can see the surface in the properties but cannot change it.
C3D 2011
View 1 Replies
View Related
Sep 15, 2013
I need to create a sub-set surface from my main surface. not sure what the vernacular is for a "subset surface" in c3d but i do have a feature line that bouinds the desired area, but that is as far as i can solve.
i did try creating a new surface - pasted the main surface in the edit definition, then deleted triangles until the boundary alighned wiht my featureline. This seemed to work, but when i view the properties of the smaller subset suface, it shows a mimum and maximum elevation that is incorrect.
View 3 Replies
View Related
Mar 1, 2013
Im currently using an addon for Civil 3D called Novapoint. It allows me to create 3D models of surfaces made out of 3d faces and easily models cut and fill 3d-models for me.
The only thing i need to create a cut and fill model is one or several ground surfaces (existing ground, earth layers, rock etc. whatever i need) and a closed polyline/3Dpolyline that represents the level I want my cut and/or fill model.
I enter the spcifications I want such as; earth cut angle, rock cut angle, fill angle, select which surfaces i want to include in the model calculation and select the polyline.Novapoint then calculates the cut/fill model from the surfaces to the polyline and models the different cut/fill angles and gives me the results in a 3d-face model and a specification of the volyme of rock cut, earth cut an fill.
1. Novapoint is quite unstable and crashes alot
2. You cant create profiles out of 3d faces
3. Novapoint does not automaticly combine the start surfaces with the modeled cut/fill surface
4. A large surface made out of 3d-faces demands alot of computer power
So I want to how I do the same that Novapoint does for me in Civil 3D? (I have access to Civil 3D 2007-2013 depending on which one you're using)I know I can take the 3Dfaces i created in Novapoint and make a surface in Civil 3D with them but I want to exclude Novapoint completely.
View 9 Replies
View Related
Mar 26, 2012
all of a sudden whenever I run audit on my corridor file the surface definition becomes a snapshot. To add to the drama, the corridor surface will not paste into an empty surface. Why?
View 2 Replies
View Related
Mar 16, 2012
Since we updated to C3D 2012, our background masks are not plotting.They show up and seem to work properly in both Model and Paper spaces as well as print preview.
They do not plot whether it is selected through the MText dialog or in an Object Label dialog box.
I have made sure the draw order was correct and made sure that the "Lines Overwrite" option is selected.
This is happening on all three of our workstations which are a mix of XP and Win 7. We are printing to a KIP 3000 and I have made sure the drivers are up-to-date.
View 4 Replies
View Related
Feb 7, 2013
My problem added with pic ... I want to make volume calculate for sample road project. When I try to compute materials I cant use Corridor surface for DATUM... There is only target surface on option..
View 2 Replies
View Related
Mar 6, 2012
I am trying to visualize a road project. The problems is, whenever the corridor surface goes below the EG surface (when the road is in cut) the EG surface is the only visible surface.
I sort of need to subtract the corridor surface from the EG surface, or merge the both surfaces into one.
View 3 Replies
View Related
Sep 19, 2013
I'm modeling a couple different alternatives, and I want to make an inside mask on EG where my FG surface will be.
Is my workflow the problem, or are surface masks just buggy?
I've created three EG surfaces, EG-1, EG-2, and EG-3. I pasted the dref'd EG into each one, so now I have three copies of EG, one for each design option. Each surface is on its own layer.
I have three FG surfaces, one for each design, FG-1, FG-2, FG-3. I want to use the outer border of each FG in turn to make an inside mask for its respective EG surface. I can make one, masking FG-1 out of EG-1. When I move on and try to make the mask for FG-2 to mask EG-2, no mask is created. Is it not working because I pasted the same original EG into each of the three EG option surfaces? Do I need to promote the original dref'd EG and copy it two more times, so each mask is applied to a completely unique surface?
Win 7E 64-bit, Intel i7, 12 GB
C3D 2012
View 3 Replies
View Related
Mar 30, 2012
why the frame of my text masks are off centered...half off the text. i have to adjust it every time using the wipeout command>frame>on to adjust the frame....then turn the frame off again.
View 6 Replies
View Related
Feb 26, 2014
I have a number of microscope images of the same subject that were taken under three different conditions. I'd like to use clipping masks to crop the images in the same way (the same size but also the same positions relative to the corners/sides of the images. In case that was incoherent, I made an image to try to explain what I'm trying to achieve (the same portion of each image for each set):
View 3 Replies
View Related