Is there a way to use multiple gradient masks in a single mask?
I'm working on a photo collage and when I bring in a new picture I would like to get rid of the hard edges. Creating a layer mask and then using the gradient tool to fade one of the edges of the picture works great. Is there a way to repeat this on the same mask so that I can use this same technique on the other 3 edges of the picture?
way of combining two linear gradient masks to blend an image on two sides, i.e bottom and Right.
View 6 Replies View RelatedI have a layer and I want it to fade to transparent (using the gradient tool?). Last time I did this, I used masks of some type, but forgot to make notes on what I did... Can someone point me in the right direction?
View 2 Replies View RelatedI want to combine two photo's and have a gradual transition. So I move one photo into the other, select layer mask, then gradient, drag left to right, and presto I have a nicely merged photo. However I would also like a gradient from Top to Bottom (and left to right) on the same photo. How do you apply mutliple gradients to the same photo? If I select gradient again, it just overlays the first. I want two or more gradients.
View 5 Replies View Relatedi'm trying to fade out the last few inches of a photograph so it blends more seamlessly into backgrounds it's placed onto.If I use the gradient tool, set to "Foreground to Transparent" I get the proper effect, but instead of fading to transparent it fades to white.. which dosen't work when I move the layer over a coloured background.
I've read and watched many tutorials on this, and they all say to create a layer mask, and then use the gradient tool.. but for some reason anytime I have the layer mask selected the gradient tool won't work at all..
I would like to know if someone can please show me how to use multiple layer masks in an image? For example..I would like to do a curves adjustment layer and also only add contrast to a certain part of the image.
View 1 Replies View RelatedI have a large image, and want to use the new generator feature to automatically extract two specific areas of this image (which is on a single layer) to two separate files.
Simple enough to do the first, using a layer mask, and works beautifully. But I can't work out how to do another, without copying the main image layer.
I successfully finished my first gradient mesh… Now, I tried to create another gradient mesh… As a sublayer under a parent layer called left eye… The left pupil was a sublayer also…
Illustrator through a fit when I try to do this… It went ahead and let me create the sublayer and gradient mesh, but… It wouldn't let me color the second sublayer/gradient mesh…
The newly created sublayer/gradient mesh had the same color as the first sublayer (the same color being the small horizontal tower that colors your different layers).
Maybe I'm just missing a step somewhere, to be able to have multiple sublayer with multiple gradient meshes?
I'm fairly new to illustrator and graphic designer, but… I'm starting to pick up on the features pretty quickly.
I can't mask more than 1 area of an xref.
If I mask one area in model space, then I try to mask another, clicking no delete of previous boundary, it still won't let me do it. I need to mask many small pieces of an xref in the model space.
I'm now using a different computer. I have a drawing with an existing surface and contours. I have two buildings on site that I'd like to mask the contours that run through them. I used the mask feature for one of them, but that is the limit. How can I mask the contours so they aren't running through the other building.
View 8 Replies View RelatedI am having trouble with using my layer masks. I can use the masks that are hidden (shown with black screen) and apply them with the white brush, but I cant get white or shown masks to be taken off with the black brush. Sometimes, not always I have trouble adjusting the opacity of white masks. I was playing around with actions I downloaded and after applying three actions to a photo, elements froze on me. I read about trashing preferences, I dont know what that does or means but I tried to hit cntrol alt shift when photoshop was opening and nothing happened. When it first opens it shows I can install the new inspiration browser ( i dont know what that is either) thinking it was a required update I tried to update and it gave me an error message, something about the installer has been mis-configured.
View 4 Replies View RelatedI have a number of microscope images of the same subject that were taken under three different conditions. I'd like to use clipping masks to crop the images in the same way (the same size but also the same positions relative to the corners/sides of the images. In case that was incoherent, I made an image to try to explain what I'm trying to achieve (the same portion of each image for each set):
View 3 Replies View RelatedA student of mine asked why you would create multiple layer masks on a single layer.
View 6 Replies View RelatedI am having a little trouble trying to add multiple fade to transparent gradients appear in a single image. Here are the steps I have done so far:
Create a new vector with the photo unlocked
Add a layer mask
use the black to white gradient, so the edge of the photo is completely translarent and as you move to the center, it slowly reveals the photo.
I used this technique I found online for one edge of the photo and it worked great, untill I tried the second gradient on the same photo, and the first one I did disappeared. I guess Photoshop only lets you have one.
The next thing I tried is to create another vector mask and create another gradient, but it did not work at all. Also, Photoshop only lets you have two vector masks per layer, so That wont do me much good if I need 4 gradients, each one fading to transparent around the 4 edges of the photo.
Any solution would be greatly appreciated. I plan to take the photo that has the fade to transparent gradients and copy it to another background image with some text.
Thanks a lot in advance,
Jake
what I'd like to do is to select the edge of a picture, and then extend the colors that are present in gradient fashion, based on the colors of the pixels at the edge.
For instance, here's a picture of the grand canyon:
How would I extend the left side with gradients that would match the colors of the pixels on the left edge, and all gradiate to black? (I'd blur or something later so that the transition from the picture to the gradient start appeared smoother)
I am trying to recreate a tilt shift effect on a photo but I cannot use a gradient except once and then it cancels out the first when I try to add a second blur in an opposite corner. How do I add multiple gradient to the same image?
View 2 Replies View RelatedHere is the image I am working on:
I need to know how to make it look like this:
There are two things going on in the origina: the S-shaped semi-transparent overlay, and a linear gradient that lightens on the top and bottom and darkens in the middle. Also, note the transparent space between the "outline shape" and the inner circles.
So - two things. 1) How do I apply a gradient to the entire shape, and 2) put the all-white overlay on top (overlay should be confined to the shape as well).
I want to apply a gradient to multiple lines of text so that the gradient flows throughout all of the text and not just line by line.
View 5 Replies View RelatedI can only use the gradient tool in one instance. After that, the first instance is removed and replaced with the new instance. How can I apply multiple instances of the gradient tool on the same image?
View 1 Replies View RelatedI need to apply a single gradient acros a number of live paint objects but am finding it annoyingly hard to find a way. I know that normally, to apply a gradient across multiple objects, you would need to make them all into one compound path but does this apply to live paint groups in any way?? Can what i need to achieve actually be done?
View 3 Replies View RelatedIs it possible to create a gradient similar to radial gradient, except that the shape is other than circular? This image would be the starting point, but I would like the white part fading to black to be another shape (say, a rectangle, a banana, etc.).
View 5 Replies View RelatedI've been experiencing problems with the Gradient editor since I got PS and the problem is that whenever I create a gradient through the gradient editor and then load it, it does load it and instead just duplicates the ones that already exist.
I save all gradients at:
C:UsersRHAppDataRoamingAdobeAdobe Photoshop CS6PresetsGradients
However it does (mostly) work when I import pre-made (from web) Gradients.
I don't know why this happens but it also did the same thing when I had CS5.5!
I was trying to learn from this video about masking. It says it is CS5.
[URL]........
When I go to the layers there is no masks. When I go to the windows, no masks. A post said that it was now under properties, but when I go there, it says no properties.
So I cannot even get started. My idea was to take this image and replace the screening area with a green background, in a manner that I thought might work similar to the video. the quick mask selected the desired area well and then I could go no farther.
Running Photoshop CS. I have two jpegs one of which I need to drag a section of the photo across to the other one. This is applied as a layer but I want to dissolve the outer edges of the picture into the underlying jpeg.
I've tried feathering but it doesn't give me the shape I need, as I'm limited to circular or rectangular shape. The rubber tool doesn't really gradient the edges away enough, even on maximum softness. I think I really need to use a mask but for some reason when I press Quick Mask and colour inthe edges then press Q it just leaves a marquee round the shape but doesn't remove the edge.
how to convert multiple selections to multiple layers or multiple files with one go?
View 6 Replies View RelatedI recently upgraded to CS6 (version 13.0.1 x64) on a Mac OS X 10.7.4, and my masks are acting wonky. When I add a mask to a layer and then use the brush tool (using black) to paint on the mask to remove the mask from a portion of my image, nothing happens. If I invert the mask so that it's all black and then paint on with a white brush, I can get the effect of the mask.
But then if I happen to use the brush on a part of the image that has already been painted (it is white on the mask), that part of the mask turns black even though I'm using a white-colored brush. Is there some sort of setting I need to change? What am I doing wrong?
In cs5 the masks panel was introduced to encourage the use of non-destructive lyre masks. It was a handy place to view all masks andcrevisitvforvrevision of refine mask command. It appears to be totally gone.
View 2 Replies View RelatedIs there a way for me to reset my preferences to the original. I was not having a problem applying a exposure compensation mask a few days ago and now when I do it does nothing. When I use the brush tool in masking nothing happens.
View 1 Replies View RelatedEverytime I add an adjustment layer to CS5 layers palette, the adjustment layer comes in as a clipping mask and is clipped to the layer below. I must have accidently invoked something that is causing this. It is very frustrating and time consuming have to change each layer in my stack. WHAT DID I DO WRONG... and HOW DO I FIX IT.
View 5 Replies View RelatedWhen I try to create a mask in photoshop CS, for some reason my picture starts to get deleted. In the picture below, I copied the background layer, and then deleted the background layer leaving me with just the copied layer. I clicked Add Layer Mask, and then clicked the Layer Mask Thumbnail in the Layers tab and then I clicked the Brush icon to begin making my mask.
In the next picture below, I tried to make my mask, but instead of that red color I normally get that show's where i'm masking, the picture is just erased.
I added another mask, when I start brushing it just switches back to the other?
View 7 Replies View Related