Photoshop Elements :: Layer Masks - Can't Get White Or Shown Masks To Be Taken Off With Black Brush
Sep 11, 2012
I am having trouble with using my layer masks. I can use the masks that are hidden (shown with black screen) and apply them with the white brush, but I cant get white or shown masks to be taken off with the black brush. Sometimes, not always I have trouble adjusting the opacity of white masks. I was playing around with actions I downloaded and after applying three actions to a photo, elements froze on me. I read about trashing preferences, I dont know what that does or means but I tried to hit cntrol alt shift when photoshop was opening and nothing happened. When it first opens it shows I can install the new inspiration browser ( i dont know what that is either) thinking it was a required update I tried to update and it gave me an error message, something about the installer has been mis-configured.
View 4 Replies
ADVERTISEMENT
Jun 9, 2013
Why would my Layer Masks in Adobe Photoshop CS5 extended Now be a square with a round circle in middle and not rectangular & black or white like they were originally ?
View 6 Replies
View Related
Mar 15, 2013
Creating a collage. Just placed a new object with a layer mask. Now I need to create a hue/saturation, levels adjustment layer and color balance adjustment layer all with masks. Ok, no problem, but when I do this, my original picture turns black and white.
View 3 Replies
View Related
Aug 7, 2013
When i am using layer masks in elements 9 I can conceal paint with a black brush, but when I want to go back over something to reveal (white brush) nothing happens. I have the layer mask selected as active and it works perfectly fine in reverse (black).
View 1 Replies
View Related
May 12, 2006
this worked until yesterday. I didn't install any software on the pc or change any settings that I can think of. I'm using photoshop cs2. I've rebooted the computer several times and I've quit/restarted photoshop several times.
when I create an adjustment layer, I cannot paint black in the mask area. I can fill with black and paint white. if, after filling black and painting white, I press D (to swap foreground/background colors), I can paint, a paintbrush thing shows up in the history, but it won't change. if I press D again, and paint some more white, it shows up in white. likewise, if I choose black another way (eyedropper, setting rgb to 0,0,0), it behaves the same. likewise, if I don't start out by filling black, and I just try to paint black on the white mask, it behaves the same (doesn't work).
if I create a new layer, I can paint black on it. If I switch to the pencil tool rather than the brush tool, I can pencil black into my adjustment layer masks.
any suggestions?
or what info can I get for you so you have a good place to start?
View 1 Replies
View Related
Jun 2, 2013
I've been using adjustment layers (curves) and creating a dark / light layer, and then using a brush with opacity of say 30-50% to paint onto the mask to show dark / light in selected areas of an image.
Until yesterday this was working fine. Now however, my brush is appearing pixelated, and scattered about like an airbrush or spray paint. Rather than all the brush being smooth. Even at 100% opacity, not all of the pixels are altered, instead there are clearly visible (when zoomed in) pixels which are lightened / darkened, and some which have been totally unaffected, which leads to a horrible pixelated effect.
View 3 Replies
View Related
Jun 1, 2013
How to use layer masks to separate line art from white background ?
View 1 Replies
View Related
Jan 2, 2014
Can normally use brushes to remove or add back part of a mask, not letting me do this at the moment, why? Also trying to use detailed smart brush but it is not letting me use on selected areas it is adding effect to whole image
View 1 Replies
View Related
Aug 3, 2013
In Elements 9 I want to select and copy a layer which is partly empty. This is to make a layer mask. The non-empty part is too complicated to select using any of the Select tools. If I use Select All, then copy and paste to a new layer, the pasted image is not in the right place - it has been displaced significantly. I am then not able to use it to create a layer mask, because it will not be properly placed above the original image. Why does this displacement happen ? Is there something I can do to avoid it ?
View 7 Replies
View Related
Jan 19, 2014
One thing I have never understood is: why use layer masks and adjustment layers, instead of simply creating a copy of the subject layer (the one I want to make changes to) and experimenting with that? It's quick (Ctrl-J), I can do it as many times as I want, I'm not affecting my Background layer. If I like the changes, I can keep them. I can switch the copy on and off to compare with the Background layer. I can do any type of blend or combination I desire. I can insert Gradient layer(s), select any part of the copy and (Ctrl-J) create a new layer containing only the selected part. I can adjust size, rotate, do anything.
It almost seems that "layer mask" and "adjustment layer" are mainly another layer of terminology; how they are intrinsically different from or superior to working with copies of the Background layer?
View 5 Replies
View Related
Jul 13, 2009
hi which is your best soft brush for accurate masks? for example add blurr and mask the hairs in a headshot and the face or in short you fav brush to make accurate masks? i use the normal brush hardness 0% but i know there are many many brushes to download ,with different shapes have a nice day
View 2 Replies
View Related
Feb 22, 2013
I have somehow reversed the process of changing a sky in my photo so that when I get to the point of painting in the sky from the 2nd photo, it is painting with white (not black) that brings out the background I want on the original photo. Where have I gone wrong? Is there anywhere I can go to find a detailed step-by-step process for doing Layer Masks?
View 1 Replies
View Related
Jul 1, 2006
I added another mask, when I start brushing it just switches back to the other?
View 7 Replies
View Related
Oct 25, 2006
If I have already made a layer mask for a specific layer...how do I copy the same layer mask and apply it to whatever layer I want?
Also, how do I make it start out all black instead of all white when creating layer masks?
View 1 Replies
View Related
Jun 30, 2006
I have added a layer mask and now they want me to fill it black... problem is when I do will it black it removes the blur and revert back to the normal image?
View 2 Replies
View Related
Feb 15, 2005
what a layer mask is and give me an example of where it owuld be used and how?
View 4 Replies
View Related
Feb 19, 2009
I'm using a clipping mask on a layer. The base layer that the clipping mask is referencing has a layer effect applied (in this case an inner shadow). I want to make it so the layer effect is only applied to the base layer and NOT the clipped layers.
Below is an example of what I'm talking about. as you can see, layer 1 has the base layer's inner shadow applied to it. I want the inner shadow to be hidden by Layer 1, but the clipping mask to still apply.
View 2 Replies
View Related
Aug 29, 2012
I am having a problem in Photoshop CS6 where I am getting posterization in a layer mask, instead of a smooth gradient / transition. I am 87% sure that this is resulting in a visible hard transition in the final image (a TIFF, not a jpeg).
I have tried applying a gaussian blur to the mask, but this just changes the posterization, it doesn't remove it. Doing the gaussian blur with the document in 16 bit mode doesn't make any difference.
The posterization is visible at all zoom levels. I have tried setting cache levels to 1 and GPU acceleration to basic (and restarting PS), but still see the posterization when using a soft brush on a layer mask.
I read some of the other threads on the forum where people had problems with their graphics cards / monitor profiles causing things to look posterized when they weren't really. The examples given in those threads looked okay to me, so I think it is a Photoshop related problem rather than a general problem for me. I've attached two screenshots below, hopefully you can open them up full size and see if they appear posterized to you.
I'm not sure what the problem is or how to fix it?
View 10 Replies
View Related
Apr 4, 2013
I swear I remember that there is a preference somewhere for turning off the automatic addition of Layer Masks for new Adjustment Layers, but I can't remember where I saw it. I'd like to disable the automatic creation of layer masks during addition of adjustment layers.
View 2 Replies
View Related
Apr 20, 2011
I have several times a little problem with subject.
If you take some Layer Style and then set mask on it then its of course mask all image.
I have problem to exlain it, i'll show:
that i have, and want to achieve that:
but get that by swich on mask on that layer:
So did i miss something about layer styles and there is easy way to apply mask to only effects, but not to image itself? Or at least to get something like that:
P.S. I know that it can be done my manipulation with groups or "merging" but is there some more "natural" way?
View 8 Replies
View Related
Oct 1, 2004
playing around with layer masks today and we can erase and paint on the masks, but i really want to type on it, or even put a photo image on it.
why a new layer is opened when i type spmething?
View 6 Replies
View Related
Aug 18, 2008
I would like to know if someone can please show me how to use multiple layer masks in an image? For example..I would like to do a curves adjustment layer and also only add contrast to a certain part of the image.
View 1 Replies
View Related
May 3, 2009
Masks have stopped working in CS3 , I can't paint on them .
View 5 Replies
View Related
Jan 16, 2013
A student of mine asked why you would create multiple layer masks on a single layer.
View 6 Replies
View Related
Nov 27, 2013
How to fix broken / destroyed layer masks (or the reason for that phenomenon)?
After clicking Alt+Click the whole picture transformed into rectangular fields and all masks are broken. I save the file 5min before that accident and it still works - only this file is dead
1st picture: accident
2nd picture: how it was before
last 3 pictures: layer masks right now... yes they are changing
Photoshop CS6 (student version) Version 13.1.2 x64 MacBook Pro: Mountain Lion 10.8.42.7 GHz Intel Core i716 GB 1600 MHz DDR3 NVIDIA GeForce GT 650M 1024 MB
View 6 Replies
View Related
Jan 28, 2013
if it's possible to add a GRADIENT vector mask to a vector shape layer?
I have a logo made up of various vector layers, and I need one of them to fade to transparency. I traditionally use a regular "black-to-transparent" gradient on the mask for this, but it's pixel-based. So my question is, with regards to the black-to-transparent gradient located in the mask of a vector layer... is there any way to make this gradient vector-based instead of pixel-based?
So I can resize the logo at will without affecting the quality of the gradient in the single layer mask.All the vector mask tutorials I found are for shapes (regular and irregular) but don't seem to involve gradient-based transparency <- which is what I need.
View 11 Replies
View Related
Feb 21, 2013
Is there a way to make non destructive adjustments to a layer mask?
View 6 Replies
View Related
Aug 17, 2012
I regularly work on large Photoshop files with many layers and folders within folders and always have the problem moving a folder only to find that somewhere inside there was a layer with an unlinked mask and it gets left behind. Is there a way i can 'relink all layer masks' without having to manually go through and relink them all? Similar to the 'Close all folders' option i guess...
View 1 Replies
View Related
Sep 9, 2012
I am having trouble aligning two layers that have layer masks on them. At the moment, the Align Left Edge tool is aligning the layers based off the entire contents of the layer, and not the mask, resulting in the layers not appearing aligned at all. Is there something I can do to tell the Align tool to take the masks into account?
I am using CS6.
View 5 Replies
View Related
Jun 12, 2007
I want to combine two photo's and have a gradual transition. So I move one photo into the other, select layer mask, then gradient, drag left to right, and presto I have a nicely merged photo. However I would also like a gradient from Top to Bottom (and left to right) on the same photo. How do you apply mutliple gradients to the same photo? If I select gradient again, it just overlays the first. I want two or more gradients.
View 5 Replies
View Related
Sep 19, 2012
We are using color profiles that adjust the white point. When these color profiles are applied to the image we cannot properly paint into layer masks because we cannot access "pure white". The brightest white we can paint with is a form of grey (aka, we cannot paint back full opacity in a layer mask). This shows up in the color "chips" as only allowing the brightest value to be a light grey. The only way to get around this is to turn off our color profile, paint pure white, and then reapply the color profile (which confirms my understanding that "pure white" is supported by the mask channel when a color profile is applied, we just cannot paint it that value when the profile is applied).
As far as I can imagine, color profiles shouldn't be applied to scalar channels like a mask channel, right?
This affects CS2, CS3, CS4, CS5 and CS6
View 4 Replies
View Related
