Photoshop :: Color Profiles Appear To Be Affecting Layer Masks
Sep 19, 2012
We are using color profiles that adjust the white point. When these color profiles are applied to the image we cannot properly paint into layer masks because we cannot access "pure white". The brightest white we can paint with is a form of grey (aka, we cannot paint back full opacity in a layer mask). This shows up in the color "chips" as only allowing the brightest value to be a light grey. The only way to get around this is to turn off our color profile, paint pure white, and then reapply the color profile (which confirms my understanding that "pure white" is supported by the mask channel when a color profile is applied, we just cannot paint it that value when the profile is applied).
As far as I can imagine, color profiles shouldn't be applied to scalar channels like a mask channel, right?
This affects CS2, CS3, CS4, CS5 and CS6
View 4 Replies
ADVERTISEMENT
Apr 3, 2013
Based on the wording in this post, is the older mask display style just plain gone (and with it the ability to toggle the mask on/off)? I'd love to return to that display style if I can - is there an option to do so somewhere?
View 1 Replies
View Related
Sep 11, 2012
I am having trouble with using my layer masks. I can use the masks that are hidden (shown with black screen) and apply them with the white brush, but I cant get white or shown masks to be taken off with the black brush. Sometimes, not always I have trouble adjusting the opacity of white masks. I was playing around with actions I downloaded and after applying three actions to a photo, elements froze on me. I read about trashing preferences, I dont know what that does or means but I tried to hit cntrol alt shift when photoshop was opening and nothing happened. When it first opens it shows I can install the new inspiration browser ( i dont know what that is either) thinking it was a required update I tried to update and it gave me an error message, something about the installer has been mis-configured.
View 4 Replies
View Related
Jan 10, 2013
I made a wax seal on Photoshop with a lot of embossment, bedevilment and a Smart Filter. It's done and I just need to make it smaller so it fits well on my certificate. When I resize it (Ctr + T) It pops up a message that reads:
______________________________________________
Adobe Photoshop CS6 Extended
"Smart Filters applied to layers contained in this group will be turned off temporarily while the transform is being previewed. They will be applied after committing the transform."
OK
[] Don't show again
______________________________________________
I click OK and I re-size the layer with free transform, and then hit enter. The Layer is resized but my Smart Filter which creates a wavy affect around the seal is totally distorted.
How do re-size my layer with smart filter without affecting the smart filter aspect of the layer.
View 7 Replies
View Related
Jun 7, 2012
I have found that when I use the Layer Styles on one layer and then make a new layer or select a shape that creates a new layer that when I go to add Styles to the new layer/new shape the previous layer is affected by how I set the Bevel & Emboss, Direction, Altitude, Drop Shadow etc etc.
For instance, let's say I have a ...
BG > New Layer > draw an ellipse and then add a Bevel with an > Angle of 89 and an Altitude of 30 and then I add a New Layer > open the Styles and go to change the Angle to say +89 or whatever and the Altitude to say 45 ... the first Layer/Shape Effects change.
How I can keep one Layer from being affected by an other Layers Effects'?
I have found that if I Rasterize a Layer Effect that I can add a "double" effect on the same layer but I haven't tried the to do this with separate layers. However, for most of the work I am doing I cannot use the Raster because everything needs to be true vectors.
I have a Dell Laptop/Windows 7 Home Premium that's a 64 bit
View 2 Replies
View Related
Feb 19, 2009
I'm using a clipping mask on a layer. The base layer that the clipping mask is referencing has a layer effect applied (in this case an inner shadow). I want to make it so the layer effect is only applied to the base layer and NOT the clipped layers.
Below is an example of what I'm talking about. as you can see, layer 1 has the base layer's inner shadow applied to it. I want the inner shadow to be hidden by Layer 1, but the clipping mask to still apply.
View 2 Replies
View Related
Jan 16, 2013
A student of mine asked why you would create multiple layer masks on a single layer.
View 6 Replies
View Related
Apr 27, 2012
I have a question regarding AutoCAD 2012 and when it comes to locking layers.
When working on the basement layer I would like to see that layer locked in turn not affecting my other layers, ie: my house/garage/second-floor.
View 9 Replies
View Related
Jun 10, 2011
My goal is to batch plots using VB in Visual Studio 2008, Autocad Map 3D 2010, Win 7 Pro 64. It all works but now I want to apply layerstates.
I am using the example in the dev. guide here: [URL]........
My questions:
1. If you use Option Strict, how do you convert from integer to "layerstatesmasks.color"? VS shows the error "Option Strict On disallows implicit conversions from 'Integer' to 'Autodesk.AutoCAD.DatabaseServices.LayerStateMasks'." I can't figure out the conversion. Are the values documented somewhere? "clientmask" is not in the object browser or the dev. guide.
2. If you aren't sure what is masked, do you turn on all of the options on (on, color, linetype, lineweight, etc.)? Is there a sum of values that means "layerstatemasks.all"?
3. LAS files are DXF format. Do I have to read the LAS to detemine what the user wants?
4. The second argument to .restorelayerstate is the viewport id. The examples use objectid.null. I could have several layouts to plot, and maybe several viewports. Is the process a) Make the layout current, b) activate each viewport, c) set model space current, and d) restore the layerstate?
View 2 Replies
View Related
Jul 1, 2006
I added another mask, when I start brushing it just switches back to the other?
View 7 Replies
View Related
Oct 25, 2006
If I have already made a layer mask for a specific layer...how do I copy the same layer mask and apply it to whatever layer I want?
Also, how do I make it start out all black instead of all white when creating layer masks?
View 1 Replies
View Related
Jun 30, 2006
I have added a layer mask and now they want me to fill it black... problem is when I do will it black it removes the blur and revert back to the normal image?
View 2 Replies
View Related
Feb 15, 2005
what a layer mask is and give me an example of where it owuld be used and how?
View 4 Replies
View Related
Aug 29, 2012
I am having a problem in Photoshop CS6 where I am getting posterization in a layer mask, instead of a smooth gradient / transition. I am 87% sure that this is resulting in a visible hard transition in the final image (a TIFF, not a jpeg).
I have tried applying a gaussian blur to the mask, but this just changes the posterization, it doesn't remove it. Doing the gaussian blur with the document in 16 bit mode doesn't make any difference.
The posterization is visible at all zoom levels. I have tried setting cache levels to 1 and GPU acceleration to basic (and restarting PS), but still see the posterization when using a soft brush on a layer mask.
I read some of the other threads on the forum where people had problems with their graphics cards / monitor profiles causing things to look posterized when they weren't really. The examples given in those threads looked okay to me, so I think it is a Photoshop related problem rather than a general problem for me. I've attached two screenshots below, hopefully you can open them up full size and see if they appear posterized to you.
I'm not sure what the problem is or how to fix it?
View 10 Replies
View Related
Apr 4, 2013
I swear I remember that there is a preference somewhere for turning off the automatic addition of Layer Masks for new Adjustment Layers, but I can't remember where I saw it. I'd like to disable the automatic creation of layer masks during addition of adjustment layers.
View 2 Replies
View Related
Apr 20, 2011
I have several times a little problem with subject.
If you take some Layer Style and then set mask on it then its of course mask all image.
I have problem to exlain it, i'll show:
that i have, and want to achieve that:
but get that by swich on mask on that layer:
So did i miss something about layer styles and there is easy way to apply mask to only effects, but not to image itself? Or at least to get something like that:
P.S. I know that it can be done my manipulation with groups or "merging" but is there some more "natural" way?
View 8 Replies
View Related
Oct 1, 2004
playing around with layer masks today and we can erase and paint on the masks, but i really want to type on it, or even put a photo image on it.
why a new layer is opened when i type spmething?
View 6 Replies
View Related
Aug 18, 2008
I would like to know if someone can please show me how to use multiple layer masks in an image? For example..I would like to do a curves adjustment layer and also only add contrast to a certain part of the image.
View 1 Replies
View Related
May 3, 2009
Masks have stopped working in CS3 , I can't paint on them .
View 5 Replies
View Related
Mar 7, 2014
How can i transform and color a video without affecting cfx Text with any movement or color . I'm working on a stereoscopic project.
View 1 Replies
View Related
Nov 27, 2013
How to fix broken / destroyed layer masks (or the reason for that phenomenon)?
After clicking Alt+Click the whole picture transformed into rectangular fields and all masks are broken. I save the file 5min before that accident and it still works - only this file is dead
1st picture: accident
2nd picture: how it was before
last 3 pictures: layer masks right now... yes they are changing
Photoshop CS6 (student version) Version 13.1.2 x64 MacBook Pro: Mountain Lion 10.8.42.7 GHz Intel Core i716 GB 1600 MHz DDR3 NVIDIA GeForce GT 650M 1024 MB
View 6 Replies
View Related
Jan 28, 2013
if it's possible to add a GRADIENT vector mask to a vector shape layer?
I have a logo made up of various vector layers, and I need one of them to fade to transparency. I traditionally use a regular "black-to-transparent" gradient on the mask for this, but it's pixel-based. So my question is, with regards to the black-to-transparent gradient located in the mask of a vector layer... is there any way to make this gradient vector-based instead of pixel-based?
So I can resize the logo at will without affecting the quality of the gradient in the single layer mask.All the vector mask tutorials I found are for shapes (regular and irregular) but don't seem to involve gradient-based transparency <- which is what I need.
View 11 Replies
View Related
Feb 21, 2013
Is there a way to make non destructive adjustments to a layer mask?
View 6 Replies
View Related
Aug 17, 2012
I regularly work on large Photoshop files with many layers and folders within folders and always have the problem moving a folder only to find that somewhere inside there was a layer with an unlinked mask and it gets left behind. Is there a way i can 'relink all layer masks' without having to manually go through and relink them all? Similar to the 'Close all folders' option i guess...
View 1 Replies
View Related
Sep 9, 2012
I am having trouble aligning two layers that have layer masks on them. At the moment, the Align Left Edge tool is aligning the layers based off the entire contents of the layer, and not the mask, resulting in the layers not appearing aligned at all. Is there something I can do to tell the Align tool to take the masks into account?
I am using CS6.
View 5 Replies
View Related
Jun 12, 2007
I want to combine two photo's and have a gradual transition. So I move one photo into the other, select layer mask, then gradient, drag left to right, and presto I have a nicely merged photo. However I would also like a gradient from Top to Bottom (and left to right) on the same photo. How do you apply mutliple gradients to the same photo? If I select gradient again, it just overlays the first. I want two or more gradients.
View 5 Replies
View Related
Dec 20, 2011
i'm trying to fade out the last few inches of a photograph so it blends more seamlessly into backgrounds it's placed onto.If I use the gradient tool, set to "Foreground to Transparent" I get the proper effect, but instead of fading to transparent it fades to white.. which dosen't work when I move the layer over a coloured background.
I've read and watched many tutorials on this, and they all say to create a layer mask, and then use the gradient tool.. but for some reason anytime I have the layer mask selected the gradient tool won't work at all..
View 12 Replies
View Related
Jun 2, 2013
I've been using adjustment layers (curves) and creating a dark / light layer, and then using a brush with opacity of say 30-50% to paint onto the mask to show dark / light in selected areas of an image.
Until yesterday this was working fine. Now however, my brush is appearing pixelated, and scattered about like an airbrush or spray paint. Rather than all the brush being smooth. Even at 100% opacity, not all of the pixels are altered, instead there are clearly visible (when zoomed in) pixels which are lightened / darkened, and some which have been totally unaffected, which leads to a horrible pixelated effect.
View 3 Replies
View Related
Sep 12, 2013
I have a large image, and want to use the new generator feature to automatically extract two specific areas of this image (which is on a single layer) to two separate files.
Simple enough to do the first, using a layer mask, and works beautifully. But I can't work out how to do another, without copying the main image layer.
View 9 Replies
View Related
Jul 18, 2013
When I use layer masks on photographs it tends to fade parts of the photo... why is this?
View 2 Replies
View Related
Jan 2, 2014
Can normally use brushes to remove or add back part of a mask, not letting me do this at the moment, why? Also trying to use detailed smart brush but it is not letting me use on selected areas it is adding effect to whole image
View 1 Replies
View Related
